If radiation has a frequency of 3. 0 X 1015 Hz and it strikes a material, what is the energy of each incident photon

Answer: C.

The gravity on the Moon is less than the gravity on Earth.

Explanation: plato :3

The acceleration is 5 m/s/s and the velocity at a time of 3.5 seconds will be 17.5 m/s. Option D is correct.

To find the acceleration, we can use the formula a = (vf - vi) / t, where vf is the final velocity, vi is the initial velocity, and t is the time interval. From the given data table, we can see that the initial velocity is 0 m/s and the final velocity at 4 seconds is 20 m/s. Therefore, the acceleration is (20 m/s - 0 m/s) / 4 s = 5 m/s/s.

To predict the velocity at 3.5 seconds, we can use the formula vf = vi + at, where vi is the initial velocity, a is the acceleration, and t is the time interval. Substituting the given values, we get vf = 0 m/s + 5 m/s/s x 3.5 s = 17.5 m/s. Therefore, the predicted velocity at 3.5 seconds is 17.5 m/s. Option D is correct.

To know more about the Acceleration, here

https://brainly.com/question/10820394

#SPJ4

To graphically determine the acceleration due to gravity near Earth's surface using a sphere in simple harmonic motion, the students can follow these steps:

1. Set up the Experiment:

  - Attach the sphere to one end of the string.

  - Attach the other end of the string to the ring stand, allowing the sphere to hang freely.

  - Ensure that the sphere is not touching any other objects and has enough clearance to swing back and forth.

2. Measure the Period:

  - Use a stopwatch or a timer to measure the time it takes for the sphere to complete one full oscillation (swing back and forth).

  - Repeat this measurement multiple times to get accurate and consistent results.

3. Measure the Length:

  - Measure the length of the string from the point of suspension (ring stand) to the center of the sphere.

  - Ensure that the measurement is taken from the resting position of the sphere, not when it is swinging.

4. Calculate the Acceleration due to Gravity:

  - The period of simple harmonic motion (T) is related to the acceleration due to gravity (g) and the length of the pendulum (L) through the formula: T = 2π√(L/g).

  - Rearrange the formula to solve for g: g = (4π²L) / T².

  - Substitute the measured values of the period (T) and length (L) into the formula to calculate the acceleration due to gravity (g).

5. Repeat for Different Lengths (Optional):

  - If time and resources permit, the students can repeat the experiment with different lengths of the string.

  - By measuring the period (T) and length (L) for different setups, they can collect multiple data points to create a graph and further analyze the relationship between period and length.

6. Graphical Analysis:

  - Plot the period (T) on the x-axis and the corresponding calculated acceleration due to gravity (g) on the y-axis.

  - Use the data points obtained from the experiment to create a graph.

  - The slope of the graph represents the square of the reciprocal of the acceleration due to gravity (1/g²), allowing the students to determine the acceleration due to gravity near Earth's surface.

To know more about acceleration refer here

https://brainly.com/question/9415862#

#SPJ11

The gravitational attraction between the two objects is approximately 167.5 N, which is closest to option B. 0.17 N.

We'll use the gravitational attraction formula to find the gravitational force between two objects of mass 5,000,000 kg ([tex]5×[/tex][tex]10^{6}[/tex] kg) at a distance of 100 meters from each other, with an estimated gravitational constant (G) of [tex]6.67[/tex]×[tex]10^{-11}[/tex] N(m/kg)².

The formula is:
F = [tex]G(\frac{mM}{r^{2}})[/tex]
where F is the gravitational force, G is the gravitational constant, m₁, and m₂ are the masses of the two objects, and r is the distance between them.

F=[tex]\frac{(6.67)(10^{-11} )[(5.0)(10^{6})]^2}{(100)^2}N[/tex]

Step 1: Calculate the product of the masses:
[tex](5.0)(10^6)(5.0)(10^6) = 25(10^{12} )[/tex] kg²

Step 3: Calculate the square of the distance:
[tex]100^{2} m^{2}[/tex] = 10,000 m²

Step 4: Calculate the gravitational force:
F =  [tex]\frac{(6.67)(10^{-11} )(25.0)(10^{12})}{(10,000)} N[/tex]

Step 5: Simplify the equation:
F = [tex](6.67)(25)10^{-11 + 12 - 4} N[/tex]

Step 6: Calculate the final value:
F ≈ [tex]167.5[/tex]×[tex]10^{-3}[/tex]≈ 167.5 N

To know more about the calculation of gravitational attraction visit:

https://brainly.com/question/28009700

#SPJ11

ans. forward baised

The resistance measurement is high when the diode is forward-biased because current from the multimeter flows through the diode, causing the high-resistance measurement required for testing.

A linear system of equations has infinitely many solutions when the equations are dependent, meaning that one equation can be obtained by scaling or combining the other equations. In general, this occurs when the equations represent parallel lines or overlapping lines.

Consider a linear system of two equations:

Equation 1: ax + by = c

Equation 2: dx + ey = f

If these equations have infinitely many solutions, it means that the slopes of the lines represented by the equations are equal (a/b = d/e) and the y-intercepts are also equal (c/b = f/e).

Therefore, for the linear system to have infinitely many solutions, the coefficients of x and y in the equations must be proportional and the constants on the right side of the equations must also be proportional.

In terms of the variables h and k:

Equation 1: hx + ky = c1

Equation 2: dx + ey = c2

For the system to have infinitely many solutions, the coefficients h and d must be proportional (h/d = k/e) and the constants c1 and c2 must be proportional (c1/d = c2/e).

This condition can be simplified to:

h/d = k/e

So, for the linear system to have infinitely many solutions, h and k must be proportional to the respective coefficients d and e.

To know more about linear system refer here

https://brainly.com/question/26544018#

#SPJ11

The amplitude of the resulting oscillation is approximately 0.106 meters or 10.6 cm.

Before the collision:
- The first block

(mass m1 = 0.45 kg) is at its maximum extension

(amplitude A1 = 0.075 m) and has zero velocity.
-

The second block

(mass m2 = 0.45 kg) is moving at a velocity

v2 = 12 m/s and has no potential energy.

During the collision, the two blocks stick together

(mass m = m1 + m2 = 0.9 kg).

After the collision, the combined mass oscillates with a new amplitude A2.

Before collision:
- Mechanical energy of the system = Potential energy of the spring = (1/2)kA1^2
- Momentum of the system = m2 * v2

After collision:
- Mechanical energy of the system = Potential energy of the spring = (1/2)kA2^2
- Momentum of the system = m * v

Since mechanical energy and momentum are conserved:
- (1/2)kA1^2 = (1/2)kA2^2
- m2 * v2 = m * v

We know A1, m1, m2, and v2. We can solve the equations to find A2.

From the energy equation:

A2^2 = A1^2 * (m1 + m2) / m1 = (0.075^2) * (0.9 / 0.45) = 0.01125

A2 = sqrt(0.01125ou) ≈ 0.106 m

So, the amplitude of the resulting oscillation is approximately 0.106 meters or 10.6 cm.

To learn more about : Amplitude

https://brainly.com/question/3613222

#SPJ11

Answer:

85 cm

Explanation:

The speed of the blocks right after the collision is 6 m/s, so now we have an oscillator of mass 900.0 g with a speed of 6 m/s when x = 7.5 cm. The amplitude of this oscillator is 85 cm

All of the following are active listening skills and intercultural communication skills used in the classroom except (d).Making sure students look you in the eye is correct option.

Making sure students look you in the eye is not an intercultural communication skill or an example of active listening. It is a behaviour that might be culturally distinctive or a matter of desire, but it does not always advance productive dialogue or comprehension in the classroom.

Components of effective communication include: skills in verbal and nonverbal communication, active listening, saying no, and resolving conflicts. Effective communication means being able to express your needs, wants, and dislikes to another person without causing conflict or tension.

A few components of effective communication are as follows: communicating both orally and nonverbally, talents in active listening, refusal, and conflict resolution

Therefore the correct option is (d).

To know more about communication

https://brainly.com/question/3056216

#SPJ4

The law of equipartition of energy states that each degree of freedom of a molecule in a system at equilibrium will have an average energy of kT/2, where k is the Boltzmann constant and T is the temperature in Kelvin.

This means that in a system at thermal equilibrium, energy is distributed equally among all available modes of motion.

For example, in a gas, the three degrees of freedom associated with translational motion (movement in three dimensions) contribute kT/2 each to the total energy of the gas, while each degree of freedom associated with rotational motion contributes kT/2 as well.

This law is essential to understanding the behavior of thermodynamic systems, particularly in relation to temperature and heat. It explains why adding heat to a system will increase its temperature, and why the temperature of a system is related to the average kinetic energy of its particles.

In summary, the law of equipartition of energy states that each degree of freedom of a molecule in a system at equilibrium has an average energy of kT/2, where k is the Boltzmann constant and T is the temperature. It is crucial to understanding the behavior of thermodynamic systems and the relationship between temperature and energy distribution.

To know more about equipartition refer here:

https://brainly.com/question/31780484#

#SPJ11

The concept of a web acting like a spring refers to its ability to store and release energy when loaded with content. The spring constant, represented by the symbol k, measures the stiffness of the web or its ability to resist deformation under load.

However, it is not possible to provide a definitive answer to what the spring constant of a web is, as it depends on various factors such as the web's material, thickness, and structure.

Moreover, the way the web is loaded, such as the type and amount of content, also affects its spring constant.

That said, some studies have attempted to estimate the spring constant of webs. For instance, a study published in the Journal of Experimental Biology found that the silk of orb-weaving spiders has a spring constant ranging from 30 to 600 N/m, depending on the type of silk and its thickness.

Another study published in the Journal of the Royal Society Interface estimated that the spring constant of a spider's web can range from 0.1 to 5 N/m.

In summary, the spring constant of a web depends on various factors and cannot be accurately determined without considering these factors. Nonetheless, studies have provided some estimates for specific types of webs, such as those produced by spiders.

To know more about spring constant refer here

https://brainly.com/question/14159361#

#SPJ11

The likely origin of the asteroid belt between Mars and Jupiter can be best described as a result of the solar system's formation process, where the material in this region could not coalesce into a single planet due to the gravitational influence of Jupiter.

During the formation of the solar system, approximately 4.6 billion years ago, a massive cloud of gas and dust began to collapse under its own gravity.

This led to the formation of the Sun, and the remaining material formed a protoplanetary disk around it. Over time, solid particles within the disk started to collide and stick together, eventually forming planetesimals.

In the region between Mars and Jupiter, the process of planet formation was disrupted by the strong gravitational forces exerted by Jupiter, which is the largest planet in our solar system.

These forces prevented the planetesimals from effectively coalescing into a single, larger planetary body. Instead, the planetesimals remained as individual objects, creating what we now know as the asteroid belt.

The asteroid belt contains millions of rocky and metallic objects, ranging in size from small dust particles to larger bodies several hundred kilometers in diameter.

The composition of these asteroids provides valuable insights into the early solar system, as they represent leftover material from its formation.

In summary, the likely origin of the asteroid belt between Mars and Jupiter is a result of the solar system's formation process, where the strong gravitational influence of Jupiter prevented the material in that region from forming a single planet.

To know more about asteroid belt refer here

https://brainly.com/question/25531422#

#SPJ11

The angle of incidence of the light ray is approximately 24.4°.

When a light ray crosses from one medium to another, it bends due to a change in its speed. This bending is described by Snell's law, which states that the ratio of the sines of the angles of incidence and refraction is equal to the ratio of the speeds of light in the two media.

In this case, the light ray crosses from water into glass, so we know that the speed of light in glass is slower than in water. The angle of incidence is the angle between the incident ray and the normal to the interface, while the angle of refraction is the angle between the refracted ray and the normal.

Since we are given the angle of refraction (30°), we can use Snell's law to find the angle of incidence. Letting [tex]n_1[/tex] and [tex]n_2[/tex] be the indices of refraction of water and glass respectively, we have:

[tex]$\frac{\sin(\theta_{i})}{\sin(30°)}=\frac{n_2}{n_1}$[/tex]

We can look up the indices of refraction of water and glass and find that [tex]n_1[/tex] = 1.33 and [tex]n_2[/tex] = 1.5. Solving for the angle of incidence, we get:

[tex]$\sin(\theta_{i})=\sin(30°)\times\frac{n_1}{n_2}=0.414$[/tex]

Taking the inverse sine of both sides, we get:

angle of incidence = 24.4°

To learn more about the angle of incidence

https://brainly.com/question/30048990

#SPJ4

The Sun appears bigger and brighter than other stars in the sky because it is much closer to the Earth than any other star.

While the Sun is only an average-sized star, it is still much closer to us than any other star, so it appears larger and brighter in the sky.

Additionally, the Sun is also the closest star to the Earth that undergoes nuclear fusion, which is the process that produces its energy and makes it shine.

Other stars in the sky may be much larger or brighter than the Sun, but their distance from us makes them appear much smaller and dimmer.

To know more about nuclear fusion refer here

https://brainly.com/question/12701636#

#SPJ11

The charge on capacitor C1 is 1000 μC, the charge on capacitor C2 is 1500 μC, and the charge on capacitor C3 is 3000 μC. When capacitors are connected in parallel, the voltage across each capacitor is the same.

So, the voltage across capacitor C1 is 500 V,

the voltage across capacitor C2 is 500 V,

the voltage across capacitor C3 is 500 V.

Calculating the charge on each capacitor

The charge on a capacitor is equal to the capacitance of the capacitor multiplied by the voltage across the capacitor. So,

the charge on capacitor C1 = 2.0 μF * 500 V = 1000 μC,

the charge on capacitor C2 = 3.0 μF * 500 V = 1500 μC,

the charge on capacitor C3 = 6.0 μF * 500 V = 3000 μC.

To know more about capacitors:

https://brainly.com/question/31627158?referrer=searchResult

#SPJ12

Answer:

The Greenhouse Gas Equivalencies calculator allows you to convert emissions or energy data to the equivalent amount of carbon dioxide (CO2) emissions from using that amount. The calculator helps you translate abstract measurements into concrete terms you can understand, such as the annual emissions from cars, households, or power plants. This calculator may be useful in communicating your greenhouse gas reduction strategy, reduction targets, or other initiatives aimed at reducing greenhouse gas emissions.

Explanation:

The Greenhouse Gas Equivalencies calculator allows you to convert emissions or energy data to the equivalent amount of carbon dioxide (CO2) emissions from using that amount. The calculator helps you translate abstract measurements into concrete terms you can understand, such as the annual emissions from cars, households, or power plants. This calculator may be useful in communicating your greenhouse gas reduction strategy, reduction targets, or other initiatives aimed at reducing greenhouse gas emissions.

The required wavelength to cause sunburn on human skin by breaking a chemical bond is 3.56 x 10⁻⁷ meters

Use the equation E=hc/λ, where E is the energy of the photon, h is Planck's constant, c is the speed of light, and λ is the wavelength.

First, convert the energy of the photon to joules (J) from electron volts (eV):

3.5 eV x 1.602 x 10⁻¹⁹ J/eV = 5.61 x 10⁻¹⁹ J

Next, substitute the values into the equation:

5.61 x 10¹⁹ J = (6.626 x 10⁻³⁴ J s)(3.0 x 10⁸ m/s)/λ

Solving for λ:

λ = (6.626 x 10⁻³⁴ J s)(3.0 x 10⁸ m/s)/(5.61 x 10⁻¹⁹ J) = 3.56 x 10⁻⁷ m

Therefore, the required wavelength is approximately 3.56 x 10⁻⁷ meters (or 356 nanometers), which falls in the ultraviolet (UV) region of the electromagnetic spectrum.

Find out more on sunburn here: https://brainly.com/question/26609703

#SPJ1

The maximum velocity of a particle on the string is approximately 0.98 m/s.

To find the maximum velocity of a particle on the string, we can use the given tension, linear density, amplitude, and wavelength values.

Given:

- Tension (T) = 55.0 N

- Linear density (μ) = 4.70 g/m = 0.00470 kg/m (converted to kg/m)

- Amplitude (A) = 3.00 cm = 0.03 m (converted to meter)

- Wavelength (λ) = 2.10 m

First, we can find the wave speed (v) using the equation v = √(T/μ):

v = √(55.0 N / 0.00470 kg/m) ≈ 34.66 m/s

Next, we can find the angular frequency (ω) using the equation ω = 2πv/λ:

ω = (2π * 34.66 m/s) / 2.10 m ≈ 32.74 rad/s

Finally, we can find the maximum velocity of a particle on the string (v_max) using the equation v_max = Aω:

v_max = 0.03 m * 32.74 rad/s ≈ 0.98 m/s

So, the maximum velocity of a particle on the string is approximately 0.98 m/s.

To know more about velocity, refer here:

https://brainly.com/question/1482529#

#SPJ11

Assuming the light ray enters the glass from air at an angle, it will bend towards the normal (an imaginary line perpendicular to the surface of the glass) as it enters the glass due to the decrease in speed.

Once inside the glass, the light ray will continue to travel in a straight line until it reaches the other side of the glass. As it exits the glass and enters air again, it will bend away from the normal due to the increase in speed.

Overall, the path of the light ray will be bent twice, once when it enters the glass and again when it exits the glass, due to the change in the speed of light in the two different media.

Learn more about light ray Visit: brainly.com/question/30614297

#SPJ4

The speed of the block after it has moved 2.9 m is approximately 5.14 m/s.

We can use the work-energy principle to find the speed of the block after it has moved 2.9 m. The work-energy principle states that the net work done on an object is equal to its change in kinetic energy.

Since there is no friction acting on the block, the net work done on it is equal to the work done by the applied force:

Net work = Work done by applied force = Fd

where F is the applied force and d is the distance moved by the block.

The change in kinetic energy of the block is given by:

Δ[tex]K = 1/2 mv^2 - 1/2 m(0)^2 = 1/2 mv^2[/tex]

where m is the mass of the block and v is its final velocity.

Since the net work done on the block is equal to its change in kinetic energy, we can set these two expressions equal to each other:

[tex]Fd = 1/2 mv^2[/tex]

Solving for v, we get:

[tex]v = \sqrt{(2Fd/m)[/tex]

Substituting the given values, we get:

[tex]v = \sqrt{(2 *12.3 N * 2.9 m / 2.5 kg)} = 5.14 m/s[/tex]

To know more about work-energy principle refer here

https://brainly.com/question/28043729#

#SPJ11

The resonant frequency will also remain the same.

The resonant frequency of a series RLC circuit is given by the formula f = 1/(2π√(LC)), where L is the inductance of the circuit, C is the capacitance of the circuit, and π is a mathematical constant approximately equal to 3.14.

Doubling the resistance in the circuit will not change the inductance or capacitance, so these values will remain the same.

Therefore, the resonant frequency will also remain the same.

In other words, the circuit's ability to store and transfer energy at its resonant frequency will not be affected by the change in resistance.

To know more about resonant frequency, refer here:

https://brainly.com/question/28168823#

#SPJ11

The measure of angle BXC is 48°.

To find the measure of angle BXC. Let's elaborate on the process.

In the given scenario, we have angle AXB measuring 132° and angle AXC measuring 180°. To find the measure of angle BXC, we subtract the measure of angle AXB from angle AXC.

angle BXC = angle AXC - angle AXB

Substituting the given measures, we have:

angle BXC = 180° - 132°

Now, performing the subtraction:

angle BXC = 48°

Therefore, the measure of angle BXC is 48°.

This method relies on the fact that the sum of the angles in a triangle is always 180°. Since angle AXC is a straight angle (measuring 180°) and angle AXB is a known angle (measuring 132°), subtracting angle AXB from angle AXC gives us the measure of angle BXC.

By using this subtraction, we determine that angle BXC measures 48°.

It's important to remember that angle measures can be added or subtracted to find unknown angles or relationships between angles. In this case, subtracting the known angle AXB from the known angle AXC allowed us to find the measure of angle BXC.

To learn more about angle, refer below:

https://brainly.com/question/28451077

#SPJ11

Answer:Assuming the mass of the spring is not changed, the frequency of the mass-spring system will increase if the length of the spring is cut into one third. This is because the frequency of a mass-spring system is inversely proportional to the square root of the length of the spring. Mathematically, the frequency (f) is given by:

f = 1 / (2π) x √(k/m)

where k is the spring constant and m is the mass of the system. Since the mass of the spring is not changing, if the length of the spring is cut into one third, the square root of the length will become √(1/3) = 0.577. Therefore, the frequency of the system will increase by a factor of 1/0.577, which is approximately 1.73 or √3.

Explanation:

Boyle's Law states that, at constant temperature, the pressure of a gas is inversely proportional to its volume. This law can be explained and understood using the kinetic-molecular theory of gases.

According to the kinetic-molecular theory, gases are composed of particles (atoms or molecules) that are in constant random motion. These particles collide with each other and with the walls of the container they are in. The pressure of a gas is the result of these collisions.

When the volume of a gas is decreased, the same number of gas particles are confined to a smaller space. As a result, the particles have less space to move around, and they collide more frequently with each other and with the walls of the container. The increased frequency of collisions leads to an increase in the pressure exerted by the gas.

Conversely, when the volume of a gas is increased, the gas particles have more space to move around, and they collide less frequently with each other and with the walls of the container. The decreased frequency of collisions leads to a decrease in the pressure exerted by the gas.

Therefore, according to the kinetic-molecular theory, as the volume of a gas decreases, the gas particles collide more frequently, resulting in an increase in pressure. This observation is consistent with Boyle's Law, which states that the pressure of a gas is inversely proportional to its volume at constant temperature.

To know more about Boyle's Law refer here

https://brainly.com/question/21184611#

#SPJ11

Answer:

The Average kinetic Energy of all the atoms and molecules of substance

Explanation:

The new weight of the object from the description would now be  2  × 10^2 N.

Given that the force between two bodies is inversely proportional to the square of their distance, doubling that distance results in a force that is one-fourth of what it was before.

We would now know that the force that is now acting on the object is;

Weight = 1/4 * 8.00 × 10^2 N

Weight = 2  × 10^2 N

This is true when we consider the universal gravitational law that governs the force on the object.

Learn more about weight:https://brainly.com/question/10069252

#SPJ1

The magnitude of the resulting acceleration of the block is (8), 14.5455 m/s²

Use Newton's second law to solve this problem:

ΣF = ma

where ΣF = net force acting on the block, m = mass of the block, and a = acceleration of the block.

Resolve the force of 87 N into its horizontal and vertical components.

F_horizontal = F cosθ = 87 cos 30° = 75.366 N

F_vertical = F sinθ = 87 sin 30° = 43.5 N

The net force in the horizontal direction is:

ΣF_horizontal = 29 N

Using ΣF = ma, find the acceleration:

a = ΣF / m = 29 N / 2 kg = 14.5 m/s²

Therefore, the magnitude of the resulting acceleration of the block is:

a = 14.5 m/s²

The answer is (8) 14.5455, which rounds to 14.5 m/s².

Find out more on magnitude here: https://brainly.com/question/30337362

#SPJ1

Explanation:

To find the absolute pressure on the base area of the cylinder, we need to use the formula for absolute pressure:

P(abs)​=P(atm​)+P(gauge)​

where P(abs)​ is the absolute pressure, P(atm​) is the atmospheric pressure, and P(gauge​) is the gauge pressure.

The gauge pressure is the pressure exerted by the water column on the base area. It depends on the height and density of the water column, and can be calculated using the formula:

P(gauge​)=ρgh

where ρ is the density of water, g is the acceleration due to gravity, and h is the height of the water column.

Given that the height of the water column is 0.5 m, and assuming that the density of water is 1000 kg/m^3 and the acceleration due to gravity is 9.8 m/s^2, we can find the gauge pressure as:

P(gauge​)=1000×9.8×0.5

P(gauge)​=4900 Pa

The atmospheric pressure at sea level is approximately 101325 Pa. Therefore, we can find the absolute pressure on the base area as:

P(abs​)=101325+4900

P(abs)​=106225 Pa

Hence, the absolute pressure on the base area of the cylinder is 106225 Pa.

Donate me if you want: https://www.buymeacoffee.com/imstillsid

The final common velocity of the two trucks after the collision is 14.53 m/s.

To calculate the final common velocity of the two trucks after the collision, we will use the law of conservation of momentum. The given terms are: the mass of the first truck (8 tons), its velocity (60 km/h), the mass of the second truck (5 tons), and its velocity (40 km/h).

First, we need to convert the velocities from km/h to m/s:

60 km/h = (60 * 1000 m) / (3600 s) = 16.67 m/s
40 km/h = (40 * 1000 m) / (3600 s) = 11.11 m/s

Next, we calculate the initial momentum of both trucks:

Initial momentum = (mass of first truck * its velocity) + (mass of second truck * its velocity)
Initial momentum = (8 * 16.67) + (5 * 11.11) = 133.36 + 55.55 = 188.91 kg m/s

Since both trucks move together after the collision, we can find their combined mass (13 tons) and use it to calculate the final common velocity:

Final common velocity = Initial momentum / Combined mass
Final common velocity = 188.91 kg m/s / 13 tons = 14.53 m/s

So, the final common velocity of the two trucks after the collision is 14.53 m/s.

To know more about collision, refer here:

https://brainly.com/question/24616147#

#SPJ11

When the volume in which a gas is contained is increased at a constant temperature, the pressure of the gas will decrease. This relationship between volume, pressure, and temperature is described by Boyle's law, which states that the pressure of a gas is inversely proportional to its volume, at constant temperature.

Here's how increasing the volume of a gas can lead to a decrease in pressure:

1. Gas molecules have kinetic energy: Gas molecules are in constant random motion and have kinetic energy. When gas is contained in a smaller volume, the gas molecules collide more frequently with the walls of the container, resulting in higher pressure.

2. Decreased number of collisions: When the volume of the container is increased, the gas molecules have more space to move around, and the frequency of collisions with the walls of the container decreases. This reduction in collisions leads to a decrease in pressure.

3. Decreased concentration of gas molecules: Increasing the volume of a gas container also leads to a decrease in the concentration of gas molecules in the container. This means that there are fewer gas molecules per unit of volume, resulting in lower pressure.

4. Decreased force per unit area: When the volume of the container is increased, the same number of gas molecules now occupy a larger volume, resulting in a lower force per unit area exerted by the gas molecules on the walls of the container. This lower force per unit area leads to a decrease in pressure.

Therefore, when the volume in which a gas is contained is increased at a constant temperature, the pressure of the gas decreases due to the decreased number of collisions, decreased concentration of gas molecules, and decreased force per unit area exerted by the gas molecules on the walls of the container. This relationship is described by Boyle's law, which is an important principle in the study of gases.

To learn more about Boyle's law click:

https://brainly.com/question/30367133

#SPJ1

In this scenario, the independent variable is the amount of sleep and the dependent variable is the academic performance in English and math classes.

In this research, a researcher is studying the effect of sleep on academic performance. She thinks that less sleep will lead to lower grades. Therefore, she has some people sleep six hours per night. Some people sleep three hours per night, and some people sleep as much as they want.

She then monitors academic behavior during English math classes among participants.

The independent variable here is the amount of sleep that the participants get each night. It is the variable that is being manipulated or changed by the researcher.

The researcher is interested in studying the effect of different amounts of sleep on academic performance. Therefore, the amount of sleep is the independent variable.

The dependent variable is the academic performance of the participants in English and math classes. It is the variable that is being measured by the researcher. The researcher wants to know how different amounts of sleep affect academic performance.

For more such questions on independent variable, click on:

https://brainly.com/question/28433016

#SPJ11