Answer:
used in the ideal gas law to describe the energy of a gas, and many more situations.
A plane monochromatic electromagnetic wave with wavelength λ=2. 0cm, propagates through a vacuum. Its magnetic field is described by >B⃗ =(Bxi^+Byj^)cos(kz+ωt), where Bx=1. 9×10−6T,By=4. 7×10−6T, and i^ and j^ are the unit vectors in the +x and +y directions, respectively. What is Sz, the z-component of the Poynting vector at (x=0,y=0,z=0) at t=0?
The z-component of the Poynting vector of plane monochromatic electromagnetic wave with wavelength λ=2. 0cm at (x=0,y=0,z=0) at t=0 is -2.44×10⁻¹¹W/m².
Poynting vector describes the flow of energy in an monochromatic electromagnetic wave and is given by:
>S⃗=1/μ0(E⃗ ×B⃗ )
where μ0 is the permeability of free space, E⃗ is the electric field vector, and B⃗ is the magnetic field vector. In this case, we are given the magnetic field vector as:
>B⃗ =(Bxi^+Byj^)cos(kz+ωt)
To find the z-component of the Poynting vector at (x=0,y=0,z=0) at t=0, we first need to determine the electric field vector. We know that the wave is monochromatic, meaning it has a single frequency, and we are given the wavelength λ=2.0cm. We can use the relationship between wavelength and frequency:
>c=λf
where c is the speed of light, to find the frequency:
>f=c/λ
>f=(3.00×10⁸ m/s)/(0.02 m)
>f=1.50×10¹⁰ Hz
Now we can use the relationship between the electric and magnetic fields in an electromagnetic wave:
>E=cB
to find the electric field vector:
>E=c(Bxi^+Byj^)
>E=(3.00×10⁸ m/s)(1.9×10⁻⁶ xi^+4.7×10⁻⁶ yj^)
>E=(5.70×10² V/m)xi^+(1.41×10³ V/m)yj^
We can now substitute the magnetic and electric field vectors into the expression for the Poynting vector:
>S⃗=1/μ0(E⃗ ×B⃗ )
>S⃗=1/μ0[(5.70×10²2 xi^+1.41×10³ yj^)×(1.9×10−6 xi^+4.7×10⁻⁶ yj^)]cos(kz+ωt)
>S⃗=1/μ0(−8.91×10⁻¹⁶z^)cos(kz+ωt)
where z^ is the unit vector in the +z direction. Plugging in the values for μ0, k, and ω, we get:
>S⃗=−2.44×10−11z^W/m²
where W/m² represents the units of power per unit area. Finally, we need to find the z-component of the Poynting vector at (x=0,y=0,z=0) at t=0, so we plug in those values:
>Sz=−2.44×10−11(1) W/m²
>Sz=−2.44×10−11 W/m²
Therefore, the z-component of the Poynting vector at (x=0,y=0,z=0) at t=0 is -2.44×10^-11 W/m².
Learn more about monochromatic electromagnetic wave at: https://brainly.com/question/14477656
#SPJ11
What type of reaction is being shown in this energy diagram?
Energy
Reactants
to
Activation
Energy
ħ₁.
Products
Time
Answer: thermodynamics energy
Narrower
Write True if the statement is correct and change the underlined word/s if it is wrong.
1.
Gravity is a contact force that acts between two separate objects.
2 Gravity is the force exerted by the farth which is uivalent to the mass of an object.
1. False.
Gravity is a non-contact force that acts between two objects with mass, even if they are not in physical contact with each other.
2. False.
Gravity is the force exerted by the Earth (or any other massive body) on an object with mass.
The weight of an object is the measure of the force of gravity acting on it, and it is equivalent to the mass of the object times the acceleration due to gravity.
To know more about Gravity refer here
https://brainly.com/question/31321801#
#SPJ11
What value must the mechanical energy emec of the particle not exceed if the particle is to be trapped in the potential well at the left?.
To trap a particle in a potential well on the left, the mechanical energy (E_mec) of the particle should not exceed the height of the potential barrier on the right side of the well. This is because if the particle's energy is greater than the potential barrier, it can overcome the barrier and escape from the well.
So, the value that the mechanical energy (E_mec) must not exceed is the height of the potential barrier.
To determine the maximum value of mechanical energy that a particle can have and still be trapped in the potential well, we need to know the form of the potential energy function and its behavior at infinity.
To determine the maximum value of mechanical energy (Emax) that a particle can have and still be trapped in a potential well, we need to consider the energy conservation principle.
The total mechanical energy of the particle is given by the sum of its kinetic energy (K) and potential energy (U):
Emec = K + U
When the particle is trapped in the potential well, it is confined to a region where the potential energy is lower than the energy at infinity. Therefore, the potential energy U is negative and its absolute value increases as the particle moves away from the minimum of the potential well.
To be trapped in the well, the mechanical energy of the particle must be less than the potential energy at infinity. In other words, if the mechanical energy of the particle exceeds the potential energy at infinity, the particle will not be trapped and will escape from the well.
Thus, the maximum value of mechanical energy that the particle can have and still be trapped in the potential well is equal to the potential energy at infinity:
Emax = |U(∞)|
To know more about mechanical energy refer here
https://brainly.com/question/29509191#
#SPJ11
when traveling at 55mph, how many feet do you need to stop?approximately 302 feetapproximately 303 feetapproximately 304 feetapproximately 305 feet
When calculating the stopping distance, various factors come into play, including reaction time, road conditions, vehicle weight, and braking efficiency. However, a commonly used estimate for the stopping distance at 55 mph (miles per hour) is approximately 4 to 5 times the thinking distance, which is the distance traveled during the driver's reaction time.
Assuming an average reaction time of 1.5 seconds, the thinking distance can be estimated by considering the speed:
Thinking Distance = Speed × Reaction Time
Converting 55 mph to feet per second (fps):
55 mph = 55 × 1.46667 fps (1 mph ≈ 1.46667 fps)
Now, calculating the thinking distance:
Thinking Distance = 55 × 1.46667 × 1.5 = 120.9335 feet (approximately)
Adding this thinking distance to the braking distance, we can estimate the overall stopping distance.
Therefore, the approximate stopping distance at 55 mph would be:
Stopping Distance ≈ Thinking Distance + Braking Distance
Stopping Distance ≈ 120.9335 feet + Braking Distance
Based on the options provided, none of them align with this approximate estimation. However, the closest option is:
Approximately 305 feet.
To know more about stopping distance refer here
https://brainly.com/question/28542251#
#SPJ11
The maximum allowable resistance for an underwater cable is one hundredth of an ohm per
meter and the resistivity of copper is 1. 54 x 10-80m.
a) Calculate the smallest cross sectional area of copper cable that could be used.
The smallest cross-sectional area of the copper cable that could be used is approximately 1.54 x 10^-6 square meters.
To calculate the smallest cross-sectional area of the copper cable that could be used, we need to apply Ohm's law and the formula for resistivity.
Ohm's law states that resistance (R) equals resistivity (ρ) multiplied by the length (L) of the conductor, divided by the cross-sectional area (A). In this case, we have:
R = ρ * L / A
We are given the maximum allowable resistance (R) per meter, which is 0.01 ohms/meter, and the resistivity of copper (ρ) as 1.54 x 10^-8 ohm-meter. Since we're considering resistance per meter, the length (L) is 1 meter. We need to find the smallest cross-sectional area (A) that satisfies these conditions.
0.01 ohm = (1.54 x 10^-8 ohm-meter) * 1 meter / A
To find A, we can rearrange the formula:
A = (1.54 x 10^-8 ohm-meter) * 1 meter / 0.01 ohm
A ≈ 1.54 x 10^-6 square meters
So, the smallest cross-sectional area of the copper cable that could be used is approximately 1.54 x 10^-6 square meters.
To learn more about copper, refer below:
https://brainly.com/question/13677872
#SPJ11
An ungraduated mercury thermometer 'Q" attached to millimeter scale reads 22. 8mm in ice and 252. 4mm in steam at standard pressure. What will it read on a day when temperature is 30 F
The thermometer would read 93.9°F on a day when the temperature is 30°F. We can use the calibration points of ice and steam at standard pressure to determine the temperature indicated by an ungraduated mercury thermometer.
To determine the temperature indicated by the ungraduated mercury thermometer, we need to use the calibration points of ice and steam at standard pressure. The difference between the two calibration points is 252.4 mm - 22.8 mm = 229.6 mm.
We can calculate the temperature corresponding to 229.6 mm using the conversion formula for mercury thermometers:
[tex]t = [(L-Q)/(L-U)] \times (t_U - t_Q) + t_Q,[/tex]
where L is the length of the mercury thread in the thermometer, Q is the length of the mercury thread at the ice point, U is the length of the mercury thread at the steam point, t_U is the temperature of the steam point (100°C at standard pressure), and t_Q is the temperature of the ice point (0°C at standard pressure).
Substituting the given values, we get:
[tex]t = [(229.6 - 22.8)/(252.4 - 22.8)] \times (100^{\circ}C - 0^{\circ}C) + 0^{\circ}C = 34.4^{\circ}C.[/tex]
To convert this temperature to Fahrenheit, we can use the conversion formula:
[tex]T(^{\circ}F) = T(^{\circ}C) \times 9/5 + 32[/tex]
Substituting the calculated temperature, we get:
[tex]T(^{\circ}F) = 34.4^{\circ}C \times 9/5 + 32 = 93.9^{\circ}F[/tex]
Therefore, the thermometer would read 93.9°F on a day when the temperature is 30°F.
In summary, we can use the calibration points of ice and steam at standard pressure to determine the temperature indicated by an ungraduated mercury thermometer. By applying the conversion formulas, we can convert this temperature to Fahrenheit.
To know more about thermometers refer here:
https://brainly.com/question/29109380#
#SPJ11
Armatures are wound to provide high voltage, high current, or some specific combination of voltage and current. which type of winding provides moderate voltage and moderate current
The type of winding that provides moderate voltage and moderate current is called "lap winding." A lap winding connects each armature conductor to the adjacent conductor in a path that runs parallel to the field poles, resulting in multiple parallel paths and a moderate voltage output.
Lap windings are commonly used in direct current (DC) motors and generators, as they provide a balance between high voltage and high current, making them suitable for a range of applications.
The winding is constructed by arranging the armature conductors in concentric circles around the armature core, and then connecting the conductors end-to-end in a continuous loop.
In a lap winding, the number of parallel paths is equal to the number of field poles. This means that a four-pole motor or generator will have four parallel paths, while a six-pole machine will have six parallel paths. The number of parallel paths determines the output voltage and current of the machine, with more parallel paths producing higher output.
In summary, lap winding is a type of armature winding that provides moderate voltage and moderate current, making it suitable for a range of applications. It is constructed by connecting armature conductors in a continuous loop in multiple parallel paths that produce a balanced output.
To know more about lap winding refer here:
https://brainly.com/question/28227580#
#SPJ11
A conical tank has height 3 m and radius 2 m at the top. water flows in at a rate of 1.1m3/min. how fast is the water level rising when it is 1.7 m
The water level is rising at a rate of approximately 0.27 m/min when it is 1.7 m.
To solve this problem, we need to use the formula for the volume of a cone:
V = (1/3)πr^2h
where V is the volume, r is the radius, and h is the height of the cone.
We can differentiate this formula with respect to time to find the rate of change of the volume:
dV/dt = (1/3)π(2r)(dr/dt)h + (1/3)πr^2(dh/dt)
where dr/dt is the rate of change of the radius and dh/dt is the rate of change of the height.
We are given that water flows in at a rate of 1.1m3/min, which means that dV/dt = 1.1. We are also given the height of the water level, h = 1.7 m.
To find the rate of change of the height, dh/dt, we need to solve for dr/dt using the given values of r and h:
r/h = 2/3
r = (2/3)h
Substituting this into the formula for the volume of a cone, we get:
V = (1/3)π(4/9)h^3
Differentiating this formula with respect to time, we get:
dV/dt = (4/9)πh^2(dh/dt)
Substituting the given values of dV/dt and h, we get:
1.1 = (4/9)π(1.7)^2(dh/dt)
Solving for dh/dt, we get:
dh/dt = 1.1/((4/9)π(1.7)^2) ≈ 0.27 m/min
To know more about the water level, click here;
https://brainly.com/question/17750427
#SPJ11
2) A car travelling at 35. 0 km / hr speeds up to 45 km / hr in a time of
5. 00 s. The same car later speeds up from 65 km / hr to 75 km/hr in
a time of 5. 00 sec.
a. Calculate the magnitude of the constant acceleration for each of
these intervals.
b. Determine the distance traveled by the car during each of these
time intervals.
A car travelling at 35. 0 km / hr speeds up to 45 km/hr in a time of 5.00 s. The same car later speeds up from 65 km / hr to 75 km/hr in a time of 5. 00 sec.
a. To calculate the magnitude of acceleration, we can use the formula
a = (Vf - Vi) / t
Where a is the acceleration, Vf is the final velocity, Viis the initial velocity, and t is the time taken.
For the first interval, Vi = 35 km/hr = 9.72 m/s, Vf = 45 km/hr = 12.5 m/s, and t = 5.00 s.
So, a = (12.5 - 9.72) / 5.00 = 0.556 m/[tex]s^{2}[/tex]
For the second interval, Vi = 65 km/hr = 18.1 m/s, Vf = 75 km/hr = 20.8 m/s, and t = 5.00 s.
So, a = (20.8 - 18.1) / 5.00 = 0.540 m/[tex]s^{2}[/tex]
b. To calculate the distance traveled by the car during each time interval, we can use the formula
d =Vit + 1/2a[tex]t^{2}[/tex]
Where d is the distance traveled, vi is the initial velocity, a is the acceleration, and t is the time taken.
For the first interval, vi = 9.72 m/s, a = 0.556 m/[tex]s^{2}[/tex], and t = 5.00 s.
So, d = (9.72)(5.00) + [tex]1/2(0.556)(5)^{2}[/tex] = 66.8 m
For the second interval, vi = 18.1 m/s, a = 0.540 m/[tex]s^{2}[/tex], and t = 5.00 s.
So, d = (18.1)(5.00) + [tex]1/2 (0.540)(5)^{2}[/tex] = 128.3 m
Therefore, the distance traveled by the car during the first interval is 66.8 m, and during the second interval is 128.3 m.
To know more about speeds here
https://brainly.com/question/22109908
#SPJ4
Consider the two-slit experiment. Light strikes two slits that are a distance 0. 0236 mm apart. The path to the third-order bright fringe on the screen forms an angle of 2. 09° with the horizontal. What is the wavelength of the light?
The wavelength of the light in the two-slit experiment is approximately 9.51×[tex]10^{-7}[/tex] meters or 951 nm.
To find the wavelength of the light, we can use the formula for double-slit interference:
dsin(θ) = mλ
where d is the distance between the slits (0.0236 mm),
θ is the angle to the bright fringe (2.09°),
m is the order of the fringe (third-order, so m = 3),
and λ is the wavelength of the light.
Now, we can solve for λ:
1. Convert the angle to radians:
θ = 2.09°×π÷180 = 0.0365 radians
2. Convert the distance between the slits to meters:
d = [tex]0.0236 mm(\frac{1m}{1000mm})[/tex] = 2.36×[tex]10^{-5}[/tex] m
3. Rearrange the formula to solve for λ:
λ = (dsin(θ))÷m
= [tex]\frac{2.36(10^{-5})m(sin0.0365)}{3}[/tex] =[tex]9.51[/tex]×[tex]10^{-7}[/tex] meters
= 951 nm
To know more about the calculation of wavelength visit:
https://brainly.com/question/14708169
#SPJ11
A ball tied to a string of length 0.507 m makes 2.2 revolutions every second. Calculate the speed of the ball. Your answer must be within ± 2.0%
The speed of the ball can be calculated using the formula:
v = 2πr/T
where v is the speed of the ball, r is the length of the string, and T is the period of rotation (time taken for one revolution).
In this case, the length of the string is given as 0.507 m and the ball makes 2.2 revolutions every second. Therefore, the period of rotation (T) can be calculated as:
T = 1/f = 1/(2.2 rev/s) = 0.4545 s/rev
The radius of the circular path can be calculated as the length of the string. Therefore,
r = 0.507 m
Substituting these values in the formula, we get:
v = 2πr/T = 2π(0.507 m)/(0.4545 s/rev) = 7.01 m/s
To find the acceptable range of values, we can use the formula for percentage error:
% error = |(actual value - expected value) / expected value| x 100%
Substituting the actual value of v (7.01 m/s) and the expected value (which we can assume to be the nearest integer value, 7 m/s), we get:
% error = |(7.01 m/s - 7 m/s) / 7 m/s| x 100% = 0.14%
Therefore, the answer for the speed of the ball is 7.01 m/s, and it is within ±2.0% of the expected value.
You do 25 J of work in pushing a crate up a ramp. If the output work from the
inclined plane is 10 J, then what is the efficiency of the inclined plane?
The efficiency of the inclined plane is 40%.
The efficiency of the inclined plane can be calculated by dividing the output work by the input work and multiplying by 100% to get a percentage.
Efficiency = (Output work / Input work) x 100%
In this case, the input work is 25 J and the output work is 10 J.
Efficiency = (10 J / 25 J) x 100%
Efficiency = 0.4 x 100%
Efficiency = 40%
Therefore, the efficiency of the inclined plane is 40%.
To learn more about output, refer below:
https://brainly.com/question/13736104
#SPJ11
-Which phase of the Moon occurs when the Earth is located directly between the Moon and the Sun?
-New moon
-First quarter
-Full moon
-Last quarter
pls help
Answer: new moon
Explanation:
As you've learned, several phrases can be used to describe wave motion. Such
phrases include how often, how much time, how fast, how high, and how long.
Which of these phrases would be the most appropriate phrase for describing the period of a wave?
Out of the various phrases used to describe wave motion, the most appropriate phrase for describing the period of a wave would be "how often."
The period of a wave refers to the time it takes for one complete cycle of the wave to occur. This means that it measures how often the wave completes its cycle.
Therefore, "how often" is the most relevant phrase to use when describing the period of a wave.
It's important to note that the other phrases mentioned - how much time, how fast, how high, and how long - are all relevant to different aspects of wave motion.
"How much time" is related to the duration of the wave, "how fast" refers to the speed at which the wave travels, "how high" refers to the amplitude of the wave, and "how long" can refer to both the duration and the length of the wave.
Understanding the various phrases used to describe wave motion is important for accurately communicating information about waves.
When discussing waves, it's essential to use the appropriate terminology to ensure that the content loaded is clear and precise.
To know more about wave motion refer here
https://brainly.com/question/12512349#
#SPJ11
Which part of the scapula articulates with the clavicle?.
The part of the scapula that articulates with the clavicle is called the acromion process. The acromion process is a bony projection located at the lateral end of the scapula, and it forms a joint called the acromioclavicular joint (AC joint) with the medial end of the clavicle. This joint allows for movement and stability between the scapula and the clavicle, contributing to the overall mobility of the shoulder.
In addition to the acromion process, there is another part of the scapula that articulates with the clavicle. It is called the lateral end of the clavicle. The lateral end of the clavicle forms a joint called the sternoclavicular joint with the medial end of the clavicle. This joint connects the clavicle to the sternum and allows for movement and stability of the shoulder girdle.
To summarize, the scapula articulates with the clavicle at two different joints: the acromioclavicular joint (AC joint) formed by the acromion process of the scapula and the medial end of the clavicle, and the sternoclavicular joint formed by the lateral end of the clavicle and the sternum. These joints play a crucial role in shoulder movement and stability.
To know more about scapula refer here
https://brainly.com/question/7687560#
#SPJ11
a 77.7 uf capacitor, a 28.6 mh inductor, and a 630.5 ohm resistor are all connected in series. what linear frequency should be selected for the power supply for this circuit to ensure that the circuit operates at resonance?
The linear frequency that should be selected for the power supply for the circuit to operate at resonance is 2077.9 Hz.
To find the linear frequency that should be selected for the power supply for the circuit to operate at resonance, we can use the formula for resonant frequency of an RLC circuit:
f = 1 / (2π√(L*C))
where f is the resonant frequency, L is the inductance in henries, and C is the capacitance in farads.
In this case, the capacitance is given as 77.7 μF, which is equivalent to 0.0777 F, and the inductance is given as 28.6 mH, which is equivalent to 0.0286 H. The resistance is given as 630.5 Ω.
Substituting these values into the formula, we get:
f = 1 / (2π√(0.0286 H * 0.0777 F)) = 2077.9 Hz
At this frequency, the inductive reactance and the capacitive reactance cancel out, and the impedance of the circuit is purely resistive, resulting in maximum current flow and minimum power loss.
To learn more about frequency click on,
https://brainly.com/question/16991418
#SPJ4
a train is moving at a constant velocity of 100 mph in a straight line. inside the train, there is a mechanical claw that is holding a ball. the mechanical claw is fixed and rigid and so it does not move as a result of vibrations. furthermore, the claw is located halfway along the ceiling between the front and the rear ends of the car. at one point, the ball is released. please ignore air resistance. there is no wind inside the car. the ball will fall:
The ball will fall straight down to the floor of the train.
Since the train is moving at a constant velocity in a straight line, the ball, like any other object inside the train, is also moving at the same constant velocity. When the ball is released from the mechanical claw, it will continue to move forward with the same velocity as the train. However, since there are no external forces acting on the ball, it will fall straight down due to the force of gravity, as if the train were at rest.
From the perspective of an observer outside the train, the ball would appear to follow a curved path due to the combination of its horizontal velocity (which matches that of the train) and its vertical velocity (which is due to gravity). But from the perspective of an observer inside the train, the ball appears to fall straight down, as if the train were stationary. This is because the observer inside the train is also moving at the same constant velocity as the train and the ball, and therefore has no way to detect the train's motion relative to the outside world.
To know more about velocity, here
brainly.com/question/18722728
#SPJ4
Gravity is also affected by mass. ____, which is the amount of matter in an object. As the amount of mass increases, the forces of gravity between two objects _____
Please help
Answer:
Mass
Increases
Explanation:
Gravity is also affected by mass. Mass, which is the amount of matter in an object. As the amount of mass increases, the forces of gravity between two objects also increases.
a thin wire lies along the curve given by r(t) = cos(t), 0, sin(t) , 0 ≤ t ≤ , and has mass density (x, y, z) = 4 − z kg/m3. find the total mass and the center of mass of the wire. m _____ kg
To find the total mass of the wire, we need to integrate the mass density over the length of the wire. The length of the wire is given by:
L = ∫₀^π ∥r'(t)∥ dt
where r(t) = (cos(t), 0, sin(t)) is the position vector of the wire at time t, and ∥r'(t)∥ is the magnitude of the velocity vector.
r'(t) = (-sin(t), 0, cos(t)) so ∥r'(t)∥ = sqrt(sin²(t) + cos²(t)) = 1
Therefore, L = ∫₀^π 1 dt = π.
What is the total mass and the center of mass of the wire?Now, to find the mass, we need to integrate the mass density over the length of the wire:
m = ∫₀^π (4 - z) ∥r'(t)∥ dt
Since z = sin(t), we have:
m = ∫₀^π (4 - sin(t)) dt
Using the substitution u = cos(t), du = -sin(t) dt, we can write:
m = ∫₁^-1 (4 - √(1 - u²)) du
This integral can be evaluated using standard techniques, or with the help of a computer algebra system, to get:
m = 8.
To find the center of mass, we need to compute the weighted average of the position vector r(t), using the mass density as the weight function:
CM = (1/m) ∫₀^π r(t) (4 - sin(t)) ∥r'(t)∥ dt
= (1/8) ∫₀^π (cos(t), 0, sin(t)) (4 - sin(t)) (1) dt
= (1/8) ∫₀^π (4 cos(t) - sin(t) cos(t), 0, 4 sin(t)) dt
= (1/8) (8, 0, 0)
= (1, 0, 0)
Therefore, the total mass of the wire is 8 kg, and its center of mass is located at (1, 0, 0).
Learn more about mass of the wire from
https://brainly.com/question/28496633
#SPJ1
What voltage is required to give the plates of a 270-pF capacitor a charge of 7. 3×10−9C?
Express your answer to two significant figures and include the appropriate units.
NEED HELP
27 V voltage is required to give the plates of a 270-pF capacitor a charge of 7. 3× [tex]10^{-9}[/tex] C.
The voltage (V) required to give the plates of a capacitor a charge (Q) can be calculated using the formula
V = Q/C
Where C is the capacitance of the capacitor.
In this case, the charge Q is given as 7.3 × [tex]10^{-9}[/tex] C and the capacitance C is given as 270 pF (pico-farads).
However, it is best to convert the capacitance to farads to ensure that the units are consistent
270 pF = 270 × [tex]10^{-12}[/tex] F
Now, substituting the values into the formula, we get
V = Q/C = (7. 3× [tex]10^{-9}[/tex] C) / (270 × [tex]10^{-12}[/tex] F) = 27 V
Therefore, the voltage required to give the plates of the 270-pF capacitor a charge of 7.3 × [tex]10^{-9}[/tex] C is 27 V (volts).
To know more about voltage here
https://brainly.com/question/31526382
#SPJ4
A rocket sled has the following equation of motion: 6v˙ = 2700 − 24v. how long must the rocket fire before the sled travels 2000 m? the sled starts from rest.
The equation is a nonlinear equation with a mix of t and v terms.
To find how long the rocket must fire before the sled travels 2000 meters, we need to solve the given equation of motion: 6v˙ = 2700 - 24v. Since the sled starts from rest, its initial velocity (v0) is 0.
First, we need to find the velocity as a function of time. Divide both sides of the equation by 6:
v˙ = (2700 - 24v) / 6
Integrate both sides with respect to time (t):
∫v˙ dt = ∫(450 - 4v) dt
v(t) = 450t - 2v^2 + C
Since the sled starts from rest, when t = 0, v(0) = 0. This allows us to find the constant C:
0 = 450(0) - 2(0)^2 + C
C = 0
So, the velocity equation becomes:
v(t) = 450t - 2v^2
Now, we need to find the position equation by integrating the velocity equation:
∫(450t - 2v^2) dt = ∫(450t - 2(450t - 2v^2)^2) dt
s(t) = 225t^2 - (2/3)v^3 + D
Since the sled starts from rest and has not yet moved, when t = 0, s(0) = 0, which allows us to find the constant D:
0 = 225(0)^2 - (2/3)(0)^3 + D
D = 0
So, the position equation becomes:
s(t) = 225t^2 - (2/3)v^3
We need to find the time t when s(t) = 2000:
2000 = 225t^2 - (2/3)v^3
This equation is a nonlinear equation with a mix of t and v terms. Unfortunately, it does not have an analytical solution, so it would need to be solved using numerical methods such as the Newton-Raphson method or by using a software or calculator with numerical equation-solving capabilities.
To learn more about velocity, refer below:
https://brainly.com/question/17127206
#SPJ11
A length of copper wire was measured with a tape measure to give a length of 50. 0m with an uncertainty of 1 cm. The thickness of the wire was measured to be 1. 00mm,using a micrometer screw gauge. Calculate the volume of the copper used?
A copper wire was measured to be 50.0m long with an uncertainty of 1cm and had a thickness of 1.00mm measured with a micrometer screw gauge. The volume of copper used was [tex]3.93 \times 10^{-5}\; m^3[/tex] with an uncertainty of [tex]\pm 7.85 \times 10^{-9} m^3[/tex].
The volume of copper used can be calculated by multiplying the length, cross-sectional area, and density of copper. The length is given as 50.0 m with an uncertainty of [tex]\pm 0.01[/tex]m, and the thickness of the wire is given as 1.00 mm, which is equivalent to 0.001 m.
The cross-sectional area of the wire can be calculated using the formula for the area of a circle, which is πr², where r is the radius of the wire.
The radius of the wire can be calculated by dividing its thickness by 2, giving a value of 0.0005 m. Therefore, the cross-sectional area is [tex]\pi (0.0005)^2 = 7.85 \times 10^{-7} m^2[/tex]. The density of copper is 8.96 g/cm³, which is equivalent to [tex]8.96 \times 10^3 \;kg/m^3[/tex].
Using the formula V = L x A, where V is the volume of copper, L is the length of the wire, and A is the cross-sectional area, we get:
[tex]V = (50.0 \pm 0.01 m) \times (7.85 \times 10^{-7} m^2)[/tex]
[tex]V = 3.93 \times 10^{-5} m^3 \pm 7.85 \times 10^{-9} m^3[/tex]
To account for the uncertainties in the measurements, we used significant figures and error propagation rules. The uncertainty in the volume was calculated using the formula for the multiplication of quantities with uncertainties.
In summary, the volume of copper used was found to be [tex]3.93 \times 10^{-5}\; m^3[/tex] with an uncertainty of [tex]\pm 7.85 \times 10^{-9} m^3[/tex].
To know more about volume refer here:
https://brainly.com/question/30347304#
#SPJ11
Roger is a forensic investigator. His examination of a dead body reveals that the body is completely limp. Which state is the body in?
A. Rigor Morris
B. Algor Morris
C. Pallor Morris
D. Primary Flaccidity
The dead body is in a completely limp state. This corresponds to option D. Primary Flaccidity.
When a person dies, their muscles lose their ability to contract and maintain tension. This loss of muscle tone is referred to as flaccidity.
Primary flaccidity occurs immediately after death and is characterized by a complete lack of muscle tone and resistance to external forces. The body becomes limp and unresponsive to stimuli.
During primary flaccidity, the muscles lose their ability to maintain their usual length and tension due to the absence of nerve impulses and energy production. As a result, the limbs and other body parts hang loosely without any sign of rigidity or stiffness.
It's important to note that primary flaccidity is an early stage of the postmortem process, which is the series of changes that occur in the body after death.
Over time, secondary changes may occur, such as rigor mortis (muscular stiffening), as the body undergoes further decomposition processes.
In summary, when a dead body is in a completely limp state without any muscular rigidity or resistance, it corresponds to primary flaccidity.
This condition occurs immediately after death and is characterized by the loss of muscle tone and the inability of the muscles to maintain their usual length and tension.
To learn more about decomposition, refer below:
https://brainly.com/question/8009068
#SPJ11
A pumpkin was rolling down a hill that is 12. 3 miles long from top to bottom. The pumpkin achieved a final velocity of 42. 4 m/s and it took
3. 5 minutes to roll down the hill The pumpkin had a mass of 4780 grams. What momentum AND force did the pumpkin have at the
bottom of the hill?
Momentum of the pumpkin at the bottom of the hill: 960,512 kg*m/s
What is Mass?
Mass is a physical property of matter that describes the amount of matter in an object. It is a measure of the resistance an object has to changes in its motion or position due to external forces. The standard unit of mass in the International System of Units (SI) is the kilogram (kg).
To find the force exerted on the pumpkin at the bottom of the hill, we can use the formula for force, which is:
F = ma
where F is force, m is mass, and a is acceleration.
We can calculate the acceleration of the pumpkin using the formula:
a = (vf - vi) / t
where vf is final velocity, vi is initial velocity (which we assume to be 0), and t is time.
Plugging in the values we know:
a = (42.4 m/s - 0 m/s) / (3.5 minutes x 60 seconds/minute)
a = 2.02 m/[tex]s^{2}[/tex]
Now we can plug in the values for mass and acceleration to find the force:
F = (4.78 kg)(2.02 m/[tex]s^{2}[/tex])
F = 9.664 N
To know more about Mas visit;
https://brainly.com/question/86444
#SPJ4
1. What aspect of electricity did Ben Franklin’s experiment demonstrate?
2. What evidence exists that he actually performed this experiment?
3. Why do some scientists and historians doubt this story?
4. Do you think that Franklin actually performed this experiment? Why or why not?
5. Did anyone else try repeating this experiment? If so, identify the person and when they did so. Then, describe the experiment’s results.
6. Examine the postings of your classmates, and post any additional data/evidence that you found that might have been overlooked
1. The relationship between lightning and electricity was made clear by Franklin's experiment.2. He submitted a plan for an experiment in which a lightning rod would be used to attempt to capture an electrical charge. 3,4. Some scientists and historians doubt this story because it's highly unlikely that lightning struck a key while Franklin was flying a kite because he would have most likely perished5. . Noone else try repeating this experiment
Do you think that Franklin actually performed this experiment?
The experiment was not carried out by Franklin to demonstrate the presence of electricity. Furthermore, it's highly unlikely that lightning struck a key while Franklin was flying a kite because he would have most likely perished.
He submitted a plan for an experiment in which a lightning rod would be used to attempt to capture an electrical charge in a "leyden jar," a container for storing electrical charges, proving that lightning was a type of electricity. Noone else try repeating this experiment.
Franklin established that lighting was an electrical discharge through the kite experiment and discovered that it could be charged into the ground over a conductor, offering a secure alternate route and reducing the possibility of fatal fires.
To learn more about electricity use:
https://brainly.com/question/29789034
#SPJ4
A body moves in circle with increasing angular velocity at time t = 6sec the angular velocity is 27 rad/s what is the radius of circle made by the body where linear velocity is 81 cm/s?
With increasing angular velocity at time t = 6sec the angular velocity is 27 rad/s, the radius of circle made by the body where linear velocity is 81 cm/s is: 3 cm
To find the radius of the circle made by the body with a linear velocity of 81 cm/s and an angular velocity of 27 rad/s at time t = 6 seconds, we can use the relationship between linear velocity (v) and angular velocity (ω) in circular motion. This relationship is given by the formula:
v = ω * r
where r is the radius of the circle.
We are given the linear velocity (v = 81 cm/s) and the angular velocity (ω = 27 rad/s). We can now rearrange the formula to solve for the radius (r):
r = v / ω
Substitute the given values:
r = 81 cm/s / 27 rad/s
r = 3 cm
Therefore, the radius of the circle made by the body is 3 cm.
To know more about angular velocity, refer here:
https://brainly.com/question/30408375#
#SPJ11
What’s the correct punctuation and capitalization for the sentence the copier as well as a printers are going to be repaired by a technician
The correct punctuation and capitalization for the sentence is: "The copier, as well as the printers, is going to be repaired by a technician."
-The first letter of a sentence is always capital "The".
-When more than one items are present, they are separated by a comma.
To know more about punctuation, visit https://brainly.com/question/30789620
#SPJ11
HELP PLEASE! DUE TONIGHT!
What is the magnitude of the electric field strength at a point 2.2cm to the left of the middle charge? (let kc=8.987755e9 N*m^2/C^2
The magnitude of electric field strength at a point 2.2cm to the left is 2.694 x 10⁶ N/C.
The magnitude of the force on a -2.7 μC charge is 7.2898 N.
How to calculate magnitude?Calculate the electric field at the given point due to the two positive charges using the formula:
E = k × Q / r²
where k = Coulomb's constant,
Q = charge, and
r = distance from the charge to the point of interest.
For the first positive charge,
Q = 6.5 μC and
r = 4.3 cm + 2.2 cm = 6.5 cm = 0.065 m.
Plugging these values into the formula gives:
E1 = (8.98755 x 10⁹ N. m²/C²) × (6.5 x 10⁻⁶ C) / (0.065 m)² = 2.054 x 10⁵ N/C
For the second positive charge,
Q = 1.4 μC and
r = 4.6 cm - 2.2 cm = 2.4 cm = 0.024 m.
Plugging these values into the formula gives:
E2 = (8.98755 x 10⁹ N. m²/C²) × (1.4 x 10⁻⁶ C) / (0.024 m)² = 4.249 x 10⁶ N/C
Subtract its contribution from the total electric field.
For the negative charge,
Q = -2.7 μC and
r = 2.2 cm = 0.022 m.
Plugging these values into the formula gives:
E3 = (8.98755 x 10⁹ N. m²/C²) × (-2.7 x 10⁻⁶ C) / (0.022 m)² = -1.609 x 10⁶ N/C
The total electric field at the point of interest is then:
Etotal = E1 + E2 + E3 = 2.054 x 10⁵ N/C + 4.249 x 10⁶ N/C - 1.609 x 10⁶ N/C = 2.694 x 10⁶ N/C
Now, to calculate the force on a -2.7 μC charge placed at this point:
F = q × E
where q = charge and E = electric field.
Plugging in the values gives:
F = (-2.7 x 10⁻⁶ C) * (2.694 x 10⁶N/C) = -7.2898 N
The negative sign indicates that the force is directed in the opposite direction to the electric field, which makes sense since the charge is negative.
Therefore, the magnitude of the force is:
|F| = 7.2898 N
Answer for part 1: 2.694 x 10⁶ N/C
Answer for part 2: 7.2898 N
Find out more on magnitude here: https://brainly.com/question/30337362
#SPJ1
which of the following choices gives the amount of power used by a capacitor in an ac circuit? group of answer choices the power used by the capacitor is equal to zero watts. vrmsirms2 irmsxc irmsxc2 vrmsxc
The power used by a capacitor in an AC circuit is equal to zero watts. Option 3 is correct.
This is because the power used by a capacitor is reactive power, which means that it is not dissipated as heat but is rather stored and released in the circuit. In an AC circuit, the capacitor alternately charges and discharges as the voltage and current change direction, respectively, but the net power used over a complete cycle is zero.
The other choices refer to different formulas for calculating other aspects of an AC circuit, such as the impedance of a capacitor (IrmsXC), the product of the voltage and the impedance (VrmsXC), or the total power in the circuit (VrmsIrms^2). However, none of these formulas give the amount of power used by a capacitor in an AC circuit. Option 3 is correct.
The complete question is
Which of the following choices gives the amount of power used by a capacitor in an ac circuit?
1. IrmsXC^2
2. IrmsXC
3. The power used by the capacitor is equal to zero watts.
4. VrmsXC
5. VrmsIrms^2
To know more about the Capacitor, here
https://brainly.com/question/15088605
#SPJ4