Julia works at a music store. One of her jobs is to stock new CDs on the shelf. A recent order arrived with 215 classical CDs, 125 jazz CDs, and 330 soft rock CDs. How many groups will Julia use to arrange all of the CDs?

The value of S2 is 50, under the condition that {sn} is  a geometric sequence that starts with an initial index of 0.

Here we have to apply the principles of geometric progression.
The derived formula for regarding the nth term concerning the geometric sequence is
[tex]= ar^{n-1 }[/tex]
Here
a = first term and r is the common ratio.
For the given case from the question
a = 2
r = 5.
Then,
s2 = a× r²
= 2×5²
= 50.
A geometric sequence refers to a particular sequence of numbers that compromises each term after the first is evaluated by multiplying the previous one by a fixed one , non-zero number known as  the common ratio.

For instance, if the first term of a geometric sequence is 2 and the common ratio is 5, then the sequence would be 2, 10, 50, 250.
To learn more about geometric sequence
https://brainly.com/question/30303755
#SPJ4

The given linear equation in slope intercept form is y = -19x/18 - 17/18.

In Mathematics and Geometry, the slope-intercept form of the equation of a straight line is given by this mathematical equation;

y = mx + c

Where:

By making "y" the subject of formula, we have the following:

19x + 18y = –17

18y = -19x - 17

y = -19x/18 - 17/18

By comparison, we have the following:

Slope, m = -19/18.

y-intercept, c = -17/18.

Read more on slope-intercept here: brainly.com/question/7889446

#SPJ1

The recursive formula for an, the nth term of the sequence is a(n) = a(n - 1) * 2 where a(1) = -1

From the question, we have the following parameters that can be used in our computation:

-1, -3, -9, -3³ ...

The above definitions imply that we simply multiply 3 to the previous term to get the current term

Using the above as a guide,

So, we have the following representation

a(n) = a(n - 1) * 3

Where

a(1) = -1

Hence, the sequence is a(n) = a(n - 1) * 2 where a(1) = -1

Read more about sequence at

brainly.com/question/29431864

#SPJ1

Therefore, the trader should sell the article for GHC 4440.00 to make a profit of 48%.

Percent is a way of expressing a number as a fraction of 100. The term "percent" means "per hundred". Percentages are usually denoted by the symbol %, which is placed after the numerical value. Percentages are used in many fields, including finance, science, and everyday life, to represent proportions, rates, and changes in quantities.

Here,

Let's call the original cost of the article "C".

We know that the trader made a profit of 24%, which means that he sold the article for 100% + 24% = 124% of its cost:

124% of C = GHC 3720.00

To find C, we can divide both sides by 1.24:

C = GHC 3720.00 / 1.24

C = GHC 3000.00

So the trader originally purchased the article for GHC 3000.00.

Now we want to know how much the trader should sell the article for to make a profit of 48%. This means that he wants to sell the article for 100% + 48% = 148% of its cost:

148% of C = ?

Substituting C = GHC 3000.00, we get:

148% of GHC 3000.00 = (148/100) x GHC 3000.00

= GHC 4440.00

To know more about percent,

https://brainly.com/question/29172752

#SPJ1

Step-by-step explanation:

4% tax is .04 in decimal:

($  50  + 30 ) * .04    = 3.20 tax    

The image of P under a 270° counterclockwise rotation about the origin is (2, -8) .

Transformations are changes done in the shapes on a coordinate plane by rotation, reflection or translation.

Translation, rotation, reflection, and dilation are the four common types of transformations.

Rotation simply means turning. If a point P, whose position vector is (x,y), is rotated  270° counterclockwise rotation about the origin, the position of the image P' is (y, -x).

We have: P(8, 2)

Thus, the image of P will be:

P'(2, -8)

Therefore, the image of P under a 270° counterclockwise rotation about the origin is (2, -8).

Learn more about rotation on:

brainly.com/question/21850160

#SPJ1

The simplified expression is (n - 3) / (n - 2).

The expression is simplified as follows;

(n² - 5n + 6) / (n² - 4n + 4)

n² - 5n + 6 can be factored as (n - 2) (n - 3)

n² - 4n + 4 can be factored as (n - 2) (n - 2)

Therefore, the expression becomes:

[(n - 2) (n - 3)] / [(n - 2) (n - 2)]

We can cancel the (n - 2) factor in the numerator and denominator, leaving us with:

(n - 3) / (n - 2)

So the simplified expression is (n - 3) / (n - 2).

Learn more about simplification here: https://brainly.com/question/28008382

#SPJ1

The cost of apples and bananas are $ 0.70 and $ 1.10 respectively if Patricia bought 4 apples and 9 bananas for $12.70 and Jose got 8 apples and 11 bananas for $17.70

Let the cost of one apple be a

the cost of one banana be b

In the case of Patricia,

12.70 = cost of 4 apples + cost of 9 bananas

Cost of 4 apples = 4a

Cost of 9 bananas = 9b

The equation we get is

4a + 9b = 12.70 ----(i)

In the case of Jose,

17.70 = cost of 8 apples + cost of 11 bananas

Cost of 8 apples = 8a

Cost of 11 bananas = 11b

The equation we get is

8a + 11b = 17.70 ----(ii)

Multiply (i) by 2

8a + 18b = 25.40 --- (iii)

Subtract (ii) and (iii)

7b = 7.70

b = $ 1.10

4a + 9 (1.10) = 12.70

4a + 9.90 = 12.70

4a = 2.80

a = $ 0.70

Learn more about Equations:

https://brainly.com/question/28871326

#SPJ4

The ordered pair that is a reflection over the x-axis for the point shown include the following: A. (6, 4)

In Mathematics and Geometry, a reflection over or across the x-axis is represented by this transformation rule (x, y) → (x, -y).

This ultimately implies that, a reflection over or across the x-axis would maintain the same x-coordinate while the sign of the y-coordinate changes from positive to negative or negative to positive.

Next, we would apply a reflection over or across the x-axis to the point;

(x, y)                →      (x, -y)

(6, -4)                →      (6, -(-4)) = (6, 4)

Read more on reflection here: brainly.com/question/27912791

#SPJ1

The expression of linear inequalities that represents Tami's earnings is as follows: 6x + 12y ≥ 150.

A linear inequality is a mathematical expression that involves a linear function and a relational operator such as <, >, ≤, ≥, or ≠ and it can be used to compare two expressions or values. It defines a range of values that satisfy inequality.

For the scenario painted above, we see that Tani is meant to earn a minimum of $150 Thus, the greater than or equal to symbol  ≥ should be used for the expression. $6 per hour and $12 per hour are also well represented in the equation.

Learn more about linear inequalities here:

https://brainly.com/question/24372553

#SPJ1

The critical points of f(x) on the interval 0 < x < 10 are: (2, max), (7.5, min)

To estimate the critical points of f(x) on the interval 0 < x < 10, we need to look for points where the derivative, f'(x), equals zero or is undefined. However, we are given a table of values for f(x) instead of f'(x), so we need to first estimate f'(x) using these values.

One way to do this is to use finite differences. We can calculate the first finite difference for each pair of adjacent values in the table, which gives an estimate of the derivative at the midpoint of the interval:

f'(x) ≈ (f(x+1) - f(x)) / (1)

Using this formula, we can calculate the following table of values for f'(x): 0123456789 23-2.79-8-5

Now we can look for critical points of f(x) by finding where f'(x) equals zero or is undefined: - f'(x) = 0 when x = 2 or x = 7.5 (approximately) - f'(x) is undefined at x = 0 and x = 10 (endpoints of the interval)

To classify each critical point, we need to look at the sign of the derivative near the point. If f'(x) changes sign from positive to negative at a critical point, then it is a local maximum. If it changes from negative to positive, then it is a local minimum. If it does not change sign, then it is neither a maximum nor a minimum.

Using the values in the table for f'(x), we can see that: -

Near x = 2, f'(x) changes sign from positive to negative, so it is a local maximum. - Near x = 7.5, f'(x) changes sign from negative to positive, so it is a local minimum. - At the endpoints x = 0 and x = 10, f'(x) is undefined, so there are no critical points.

Therefore, the critical points of f(x) on the interval 0 < x < 10 are: (2, max), (7.5, min)

Learn more about critical points,

https://brainly.com/question/30760896

#SPJ11

The given ordered pairs (4, 0.5), (2.5, 4.5), (0.5,3), and (2, 0) are plotted on the coordinate plane as shown in the graph below.

From the question, we are to plot the given ordered pairs on the coordinate plane

To plot the given ordered pairs, we will determine the location of the point on the coordinate plane

We will look at the first number in the ordered pair (the x-coordinate) and find that value on the x-axis. Also, we will look at the second number (the y-coordinate) and find that value on the y-axis.

Now, we will plot the point where the x-coordinate and y-coordinate intersect. The point is represented by a dot.

The ordered pairs are plotted on the coordinate plane as shown in the graph below.

Learn more on Plotting ordered pair in a coordinate plane here: https://brainly.com/question/29324959

#SPJ1

The probability that the tennis player will make exactly 3 first serves out of 8 attempts is 0.278%.

To solve this problem, we can use the binomial distribution. The binomial distribution is used to calculate the probability of a certain number of successes (in this case, first serves) in a fixed number of independent trials (in this case, serves). The formula for the binomial distribution is:

P(X = x) = (n choose x) x pˣ x (1 - p)ⁿ⁻ˣ

where P(X = x) is the probability of getting x successes, n is the number of trials, p is the probability of success in each trial, and (n choose x) is the binomial coefficient, which represents the number of ways to choose x successes out of n trials.

Using this formula, we can plug in the values from our problem:

P(X = 3) = (8 choose 3) x 0.6³ x (1 - 0.6)⁸⁻³

P(X = 3) = (8! / (3! x 5!)) x 0.216 x 0.32768

P(X = 3) = 0.278%

This means that out of 1000 attempts, we can expect the player to make exactly 3 first serves around 2-3 times. It's important to note that this is just an estimation, and the actual number of successful serves may vary.

To know more about probability here

https://brainly.com/question/11234923

#SPJ4

Mr. Smith should make 3 rows on the table so that each brownie has its own square.

We shall use mathematical operations to determine the number of rows Mr. Smith would use on the table.

Some mathematical operations include addition, subtractions, multiplications, division, etc., to find out the number of rows Mr. Smith would make.

First, let's find the total number of brownies brought by the students:

12 + (4 x 3) = 24

Next, we shall divide the table into squares so that each brownie has its own square.

Since there are 24 brownies, we need 24 squares.

Then, since the table has 8 columns, we can divide the brownies equally among these columns to get the number of rows needed.

24 ÷ 8 = 3

Therefore, Mr. Smith should make 3 rows on the table so that each brownie has its own square.

Learn more about mathematical operations at brainly.com/question/20628271

#SPJ1

Check the picture below.

Answer:

250 degrees

Step-by-step explanation:

For any circle tangent to line FG at point F, as shown in the diagram, and for any point E on the circle, the relationship between the measure of angle GFE and the arclength of FE is given by [tex]m~\text{arc}~FE=2m \angle GFE[/tex].

So, the measure of the arc FE is 110 degrees.  Since a circle is fully 360degrees, the missing arc represented by the question mark is given by the following equation:

? + 110 = 360

Solving for the ?

? = 250 degrees

To find the value(s) of the variable(s), you need to have an equation or problem statement that relates the variable(s) to other known quantities. Once you have this equation or statement, you can solve for the variable(s) by manipulating the equation algebraically.

For example, if the problem states that 2x + 5 = 17, you can solve for x by first subtracting 5 from both sides to get 2x = 12. Then, you can divide both sides by 2 to get x = 6. So, the value of the variable x is 6.

In some cases, you may need to use more advanced methods such as factoring or the quadratic formula to solve for the variable(s). Regardless of the method used, it's important to check your answer(s) by plugging them back into the original equation to make sure they satisfy the given conditions.

In terms of rounding decimal answers to the nearest tenth, this means that if the answer is a decimal with more than one digit after the decimal point, you would round to the nearest tenth place (i.e. the digit immediately to the right of the decimal point). For example, if the answer is 3.456, you would round to 3.5.

To know more about equation algebraically refer here

https://brainly.com/question/953809#

#SPJ11

1 x 10⁻⁹ expresses a very small number i.e. nanosecond using a negative power of 10. The correct answer is option b).

Computer calculation speeds are incredibly fast, and they are usually measured in very small units of time. One of these units is a nanosecond, which is equal to one billionth of a second, or 0.000000001 seconds. This unit is used to measure the time it takes for a computer to perform basic operations such as adding two numbers or accessing data from memory.

To express 0.000000001 in scientific notation using a negative power of 10, we need to determine the number of decimal places to the right of the decimal point until we reach the first non-zero digit. In this case, we count nine decimal places to the right of the decimal point before we reach the first non-zero digit, which is 1. This means that 0.000000001 can be written as 1 x 10⁻⁹.

In scientific notation, any number can be expressed as the product of a number between 1 and 10, and a power of 10. The power of 10 tells us how many places we need to move the decimal point to the left or right to express the number in standard form. In the case of 0.000000001, we need to move the decimal point nine places to the right to express the number in standard form.

By writing this number in scientific notation as 1 x 10⁻⁹, we can easily perform calculations with it and compare it to other values measured in nanoseconds. Hence option b) is the correct option.

Know more about nanosecond here:

https://brainly.com/question/31475975

#SPJ11

To compute the direct labor rate and efficiency variances, we will use the given terms: Actual Hours (AH), Standard Hours (SH), Actual Rate (AR), and Standard Rate (SR). Here's a step-by-step explanation:

Step 1: Calculate the Actual Labor Cost
Actual Labor Cost = AH * AR

Step 2: Calculate the Standard Labor Cost
Standard Labor Cost = SH * SR

Step 3: Calculate the Labor Rate Variance
Labor Rate Variance = (AR - SR) * AH

Step 4: Classify the Labor Rate Variance
If the Labor Rate Variance is positive, it is unfavorable. If it is negative, it is favorable. If it is zero, there is no variance.

Step 5: Calculate the Standard Labor Cost for Actual Hours
Standard Labor Cost for Actual Hours = AH * SR

Step 6: Calculate the Labor Efficiency Variance
Labor Efficiency Variance = (AH - SH) * SR

Step 7: Classify the Labor Efficiency Variance
If the Labor Efficiency Variance is positive, it is unfavorable. If it is negative, it is favorable. If it is zero, there is no variance.

By following these steps, you can compute the direct labor rate and efficiency variances for the period and classify each as favorable, unfavorable, or no variance.

To know more about efficiency variances refer here

https://brainly.com/question/28240324#

#SPJ11

The divergence of the vector field div((2[tex]x^2[/tex]L - sin(xz)) i + 5j - (sin(xz)) k) at all points where it is defined is: div(F) = 4x - z*cos(xz) - x*cos(xz).

To find the divergence of the given vector field, we need to apply the divergence operator to the vector field.

The divergence operator is given by the following formula:
div(F) = ∂Fx/∂x + ∂Fy/∂y + ∂Fz/∂z
Where F = (Fx, Fy, Fz) is the vector field.
Let's apply this formula to the given vector field:
F = (2[tex]x^2[/tex] - sin(xz)) i + 5j - (sin(xz)) k
div(F) = ∂Fx/∂x + ∂Fy/∂y + ∂Fz/∂z
      = (4x - zcos(xz)) + 0 + (-xcos(xz))
Therefore, the divergence of the given vector field is:
div(F) = 4x - zcos(xz) - xcos(xz)
This expression gives the divergence of the vector field at all points where it is defined.
In this case, the vector field is defined for all values of x, y, and z, so the divergence is defined for all points in space.
It is worth noting that the divergence of a vector field represents the rate at which the vector field flows out of a small volume of space surrounding a point.

If the divergence is positive, the vector field is flowing out of the volume; if it is negative, the vector field is flowing into the volume and if it is zero, the vector field is not flowing into or out of the volume.

For similar question on divergence:

brainly.com/question/30995367

#SPJ11

The divergence of the given vector field is div(F) = 4x - z × cos(xz) - x × cos(xz).

To find the divergence of the given vector field div( (2[tex]x^2[/tex] - sin(xz)) i + 5j - (sin(xz)) k), follow these steps:

Identify the components of the vector field:

F(x, y, z) = (2[tex]x^2[/tex]- sin(xz), 5, -sin(xz))

Compute the partial derivatives with respect to each variable:

∂F1/∂x = ∂(2[tex]x^2[/tex] - sin(xz))/∂x

∂F2/∂y = ∂(5)/∂y

∂F3/∂z = ∂(-sin(xz))/∂z

Calculate each partial derivative:

∂F1/∂x = 4x - z × cos(xz)

∂F2/∂y = 0

∂F3/∂z = -x × cos(xz)

Add the partial derivatives to find the divergence:

div(F) = ∂F1/∂x + ∂F2/∂y + ∂F3/∂z

div(F) = (4x - z × cos(xz)) + 0 + (-x × cos(xz))

Simplify the expression:

div(F) = 4x - z × cos(xz) - x × cos(xz)

for such more question on divergence

https://brainly.com/question/22008756

#SPJ11

In a bag containing 5 red, 3 blue, and 12 yellow marbles, we will predict the number of times Hazel will select a blue marble out of 500 trials.

Step 1: Calculate the total number of marbles in the bag:
Total marbles = 5 red + 3 blue + 12 yellow = 20 marbles

Step 2: Determine the probability of selecting a blue marble:
Probability of selecting a blue marble = (number of blue marbles) / (total marbles) = 3 blue / 20 marbles = 3/20

Step 3: Predict the number of times Hazel will select a blue marble in 500 trials:
Predicted blue marbles selected = (probability of selecting a blue marble) x (total trials) = (3/20) x 500

Step 4: Perform the calculation:
(3/20) x 500 = 75

In conclusion, we predict that Hazel will select a blue marble 75 times out of 500 trials, given that the bag contains 5 red, 3 blue, and 12 yellow marbles.

To know more about trials refer here

https://brainly.in/question/27893861#

#SPJ11

The area covered by a sprinkler that sprays water in a circle of an 8-foot radius is 200.96 square feet.

Circle is a 2-Dimensional shape. It has no vertex and edges. It has a center point which equidistant from any point of boundary or circumference of a circle.

Radius refers to the distance between the center and any point on the boundary or circumference of the circle.

The area of a circle is given as the product of a constant pi and the square of the radius.

A =  π[tex]r^2[/tex]

A is the area

r is the radius

r = 8 feet

A = π * 8 * 8

= 3.14 * 8 * 8

= 200.96 square feet

Learn more about Circle:

https://brainly.com/question/12269818

#SPJ4

The lateral surface area about x-axis is 114.1 square units.

To find the lateral surface area of the cone generated by revolving the line segment y=9/2x, 0≤x≤9 about the x-axis, we first need to find the length of the slant height of the cone.

We can think of the cone as being formed by rotating a right triangle about the x-axis.

The line segment y=9/2x intersects the x-axis at (0,0) and (9,81/2).

This forms a right triangle with base 9 and height √(81/2) = (9/2)√2.

The slant height of the cone is the hypotenuse of this right triangle, which can be found using the Pythagorean theorem:

l = √(9² + (9/2√2)²) = √(81 + 81/8) = (9/√2)√(9/8) = (9/2)√2

The lateral surface area of the cone can then be found using the formula:

L = πrl

where r is the radius of the base of the cone (which is equal to half the base of the right triangle, or 9/2) and

l is the slant height we just found.

Substituting in the values, we get:

L = π(9/2)(9/2)√2 = (81/4)π√2 ≈ 114.1

Therefore, the lateral surface area of the cone generated by revolving the line segment y=9/2x, 0≤x≤9 about the x-axis is approximately 114.1 square units.

To practice more questions about  lateral surface area:

https://brainly.com/question/15777841

#SPJ11

According to the 68-95-99.7 rule, approximately 68% of the distribution falls within one standard deviation of the mean, 95% falls within two standard deviations, and 99.7% falls within three standard deviations.

In this case, the mean is 7.06 minutes and the standard deviation is 0.75 minutes. Therefore, the range of times that covers the middle 95% of the distribution would be from the mean minus two standard deviations (7.06 - 2 x 0.75 = 5.56 minutes) to the mean plus two standard deviations (7.06 + 2 x 0.75 = 8.56 minutes).

In other words, 95% of the male college students' mile run times are expected to fall between 5.56 and 8.56 minutes. This means that most of the students' mile run times will be within this range, and only a small percentage will be outside of it.

To know more about standard deviation click on below link:

https://brainly.com/question/23907081#

#SPJ11

The probability in the two fair dice problem is given as [tex]P(A|B) = 1/6[/tex].

To find [tex]P(A|B)[/tex], we first need to find [tex]P(B)[/tex], which is the probability that two dice are showing different faces.

The total number of possible outcomes when rolling two dice is [tex]6x6 = 36[/tex]. Out of these [tex]36[/tex] possible outcomes, there are [tex]6[/tex] outcomes where both dice show the same face (e.g., both dice show a 1). Therefore, there are [tex]36-6=30[/tex] outcomes where two dice show different faces.

Hence, P(B) = [tex]30/36 = 5/6[/tex].

Next, we need to find the probability of A and B occurring together, i.e., P(A and B).

The possible pairs of faces that add up to 10 are [tex](4,6), (6,4),[/tex] and [tex](5,5)[/tex]. Each of these pairs can occur in 2 ways (e.g., the pair [tex](4,6)[/tex] can occur as [tex](4,6) or (6,4))[/tex]. Therefore, there are 6 ways in total for the sum of two dice to be 10.

Out of these 6 outcomes, only one outcome (the pair (5,5)) violates condition B (i.e., both dice showing the same face). Therefore, there are [tex]6-1=5[/tex] outcomes where the sum of the two dice is 10 and the two dice show different faces.

Hence, P(A and B) [tex]= 5/36[/tex].

Using the formula for conditional probability, we can find P(A|B) as:

[tex]P(A|B) = P(A and B) / P(B) = (5/36) / (5/6) = 1/6.[/tex]

Therefore, [tex]P(A|B) = 1/6[/tex], which is the required probability.

To learn more about two fair dice problem,

brainly.com/question/28889662

#SPJ11

Answer:

22.86 centimeters

Step-by-step explanation:

How many centimeters are in 9 inches?

1 inch = 2.54 centimeters

9 inches = 2.54 x 9 = 22.86 centimeters

So, there are 22.86 centimeters in 9 inches.

Answer:

22.86 centimeters

Step-by-step explanation:

To convert inches to centimeters, multiply the inches by 2.54:

9·2.54=22.86

So, there are 22.86 centimeters in 9 inches.

Hope this helps :)

S = lim[n → ∞] sn
 = lim[n → ∞] (306n^2 + 35n + 306)
 = ∞
So unfortunately, the series (n + 16)(n + 18) diverges to infinity and does not have a finite sum.To find the sum S of the series (n + 16)(n + 18), we need to take the limit of the sequence of partial sums as n approaches infinity. So let's first find the formula for the nth partial sum sn:

sn = (1 + 16)(1 + 18) + (2 + 16)(2 + 18) + ... + (n + 16)(n + 18)
  = ∑[(k + 16)(k + 18)] (from k = 1 to n)

Using the formula for the sum of squares, we can expand each term in the sum:

(k + 16)(k + 18) = k^2 + 34k + 288

So now we have:

sn = ∑(k^2 + 34k + 288) (from k = 1 to n)
  = ∑k^2 + 34∑k + 288n (from k = 1 to n)
  = n(n + 1)(2n + 1)/6 + 34n(n + 1)/2 + 288n
  = 306n^2 + 35n + 306

Now we can take the limit of sn as n approaches infinity to find S:

S = lim[n → ∞] sn
 = lim[n → ∞] (306n^2 + 35n + 306)
 = ∞

So unfortunately, the series (n + 16)(n + 18) diverges to infinity and does not have a finite sum.

Learn more about sum of squares here:

https://brainly.com/question/30241409

#SPJ11

The area of the triangle ∆WXY is derived to be 5.7 to the nearest tenth.

When two side length of a triangle and the angle between them is given, the area is half the multiplication of the two sides and the sine of the angle.

Area of the triangle = 1/2 × 4.7 × sin162

Area of the triangle = 11.4738/2

Area of the triangle = 5.7369.

Therefore, the area of the triangle ∆WXY is derived to be 5.7 to the nearest tenth.

Read more about area here:https://brainly.com/question/29123926

#SPJ1

Answer:

2

Step-by-step explanation:

The median of a data set is the middle value when the data is arranged in order of size.

The given table of data is:

[tex]\begin{array}{|c|c|c|c|}\cline{1-4}\vphantom{\dfrac12}\frac{3}{4}&3&1&8\\\cline{1-4}\vphantom{\dfrac12}5&\frac{1}{4}&\frac{3}{5}&\frac{7}{2}\\\cline{1-4}\end{array}[/tex]

Arrange the data in order of size:

[tex]\dfrac{1}{4},\;\dfrac{3}{5},\;\dfrac{3}{4},\;1,\;3,\;\dfrac{7}{2},\;5,\;8[/tex]

As there are 8 data values, the median is the average of the two middle values.

The two middle values are 1 and 3.

The average of 1 and 3 is 2:  

[tex]\dfrac{1+3}{2}=\dfrac{4}{2}=2[/tex]

Therefore, the median of the given data is 2.