PLEASE HELP AND SHOW WORK!! 10 PTS IF U ANSWER

The complete relative frequency table include the following missing values:

Early bird Night Owl Total

Coffee. 0.21 0.44 0.65

Tea. 0.19. 0.16. 0.35

Total. 0.4. 0.6. 1

The total of each column is being determined from the grand total which can then be use to fill in the various missing parts of the relative frequency table.

For coffee;

To determine the total = 1-0.35 = 0.65

Coffee early Bird = 0.65-0.44 =0.21

For tea ;

Tea night owl = 0.35-0.19 = 0.16

For grand total = 1-0.6 = 0.4

Learn more about frequency here:

https://brainly.com/question/27151918

#SPJ1

If the scatter plot shows no discernible relationship between the variables and the points appear randomly scattered, then the r-value of 0.01 is accurate. However, if there is a visible relationship, the value of r may need to be recalculated or checked for errors in data input or analysis.

To find whether a correlation coefficient of r = 0.01 is an accurate value for the data based on the scatter plot, it's essential to consider the following factors:

1. Visual inspection of the scatter plot: Observe the overall pattern of data points in the scatter plot. If the points seem randomly scattered with no discernible pattern, then a correlation coefficient close to 0, such as r = 0.01, would be accurate. However, if there is a clear linear or non-linear relationship between the variables, the value of r = 0.01 may not be accurate.

2. Strength of the relationship: The correlation coefficient r ranges from -1 to 1, where -1 represents a strong negative relationship, 0 represents no relationship, and 1 represents a strong positive relationship. An r-value of 0.01 indicates a very weak or no relationship between the variables. Confirm that this is consistent with the scatter plot pattern.

To determine if the r-value of 0.01 is accurate for the data, carefully examine the scatter plot and consider these factors. If the scatter plot shows no discernible relationship between the variables and the points appear randomly scattered, then the r-value of 0.01 is accurate. However, if there is a visible relationship, the value of r may need to be recalculated or checked for errors in data input or analysis.

To know more about scatter plot refer here:

https://brainly.com/question/29231735

#SPJ11

The measure of angle zxy is 125 degrees.

To solve the problem, we can use the fact that the sum of the measures of two adjacent angles is 180 degrees. Let's call the measure of angle zxy "x".

We know that the ratio of m angle wxz to m angle zxy is 11:25, which means that:

m angle wxz : m angle zxy = 11 : 25

We can write this as an equation:

m angle wxz / m angle zxy = 11/25

We also know that the two angles are adjacent, so their measures add up to 180 degrees:

m angle wxz + m angle zxy = 180

Now we can use these two equations to solve for x:

m angle wxz / x = 11/25

m angle wxz = (11/25)x

Substituting this into the second equation:

(11/25)x + x = 180

(36/25)x = 180

x = (25/36) * 180

x = 125

Therefore, the measure of angle zxy is 125 degrees.

Learn more about adjacent angles,

https://brainly.com/question/28394984

#SPJ11

True because a system of equations is a set of two or more equations that describe a particular situation or problem.

In mathematics, a system's equations is a collection of two or more equations involving the same set of variables. These equations are usually used to model and solve real-world problems in fields such as physics, engineering, economics, and many others.

For example, consider the following system of two equations:

2x + y = 5

x - y = 3

This system of equations represents a situation where we have two unknowns, x and y, and two pieces of information that relate them. To solve the system of equations, we need to find the values of x and y that satisfy both equations simultaneously.

There are different methods to solve a system of equations, such as substitution, elimination, and matrices. The choice of method depends on the complexity of the system and personal preference. Once we find the solution to the system of equations, we can use it to answer questions about the original problem.

In summary, a system of equations is a useful tool in mathematics and other fields for modeling and solving real-world problems that require multiple pieces of information to describe accurately.

Learn more about System's equation

brainly.com/question/1161825

#SPJ11

The scale factor is 7/5 or 1.4.

In order to determine the scale factor, we need to compare the corresponding sides of two similar figures. Let's begin by drawing a diagram to represent the given information:

         M ------- N

        /             \

       /               \

      A ---------------- C

       <-----25cm----->

   <-----20cm-----> <-----35cm----->

From the diagram, we see that triangle AMC is similar to triangle CNC, since they share angle C and have proportional sides:

Scale factor = corresponding side length in triangle CNC / corresponding side length in triangle AMC

We can calculate the scale factor by comparing the lengths of the corresponding sides:

Scale factor = NC / AM

Scale factor = 35 cm / 25 cm

Scale factor = 7 / 5

Learn more about scale factor

brainly.com/question/30215044

#SPJ11

62% of the dancers did not get into the show.

To find the percentage of dancers who did not get into the show.

First, identify the total number of dancers auditioning and the number of dancers who did not get into the show.

In this case, there are 150 dancers in total, and 93 of them did not get in.
Next, divide the number of dancers who did not get into the show by the total number of dancers auditioning.

This will give us the proportion of dancers who did not get in.
  Proportion = (Number of dancers who did not get in) / (Total number of dancers)
  Proportion = 93 / 150
Finally, to find the percentage, multiply the proportion by 100:
  Percentage = Proportion * 100
  Percentage = (93 / 150) * 100.

For similar question on dancers.

https://brainly.com/question/28183590

#SPJ11

Answer:

3

Step-by-step explanation:

We can see that in figure ABC, line segment AB is 5 ft.

We can also see that in figure DEF, line segment DE is 15 ft.

How did we get from 5 to 15?

We multiplied by 3, so the scale factor is 3.

Hope this helps! :)

Answer:

3

√

10

√

5

Step-by-step explanation:

The transformation of f(x) to g(x) involves a horizontal shift and a reflection. The function g(x) is a transformed version of f(x) obtained by translating f(x) to the left by 2 units along the x-axis.

Specifically, to obtain g(x) from f(x), we first shift f(x) two units to the left, and then we take the absolute value of the result.

This means that the graph of g(x) will be the same as the graph of f(x) for all values of x greater than or equal to -2, but will be reflected across the y-axis for all values of x less than -2.

In other words, the transformation of f(x) to g(x) involves a horizontal shift and a reflection.

To know more about absolute value, refer here:

https://brainly.com/question/4691050#

#SPJ11

Answer:

m = 1/2

Step-by-step explanation:

We Know

The slope of a line is the rise/run

Pick 2 points (0,1) (2,2)

We see the y increase by 1, and the x increase by 2, so the slope of the line is

m = 1/2

This new function W(x) = 22 - (11/8) * (x - 16)² will model the shape of the arch with dimensions of 32 inches wide and 44 inches tall.

To modify the function W to model the new arch with dimensions of 32 inches wide and 44 inches tall, we need to adjust the formula to reflect the new proportions.

Currently, the function W is defined as:

W(x) = h/2 - h/(2a) * (x - a)²

Where h is the height of the arch and a is half of the width of the arch.

To modify the function for the new arch, we need to adjust the value of a to reflect the new width of 32 inches. Since a is half the width, we have:

a = 32/2 = 16

We also need to adjust the value of h to reflect the new height of 44 inches. Therefore, the new function for the arch would be:

W(x) = 44/2 - 44/(2*16) * (x - 16)²

Simplifying this expression, we get:

W(x) = 22 - (11/8) * (x - 16)²

This new function will model the shape of the arch with dimensions of 32 inches wide and 44 inches tall. The parabolic shape of the function will remain the same, but the specific coefficients in the function have been adjusted to reflect the new proportions of the arch.

Know more about function here:

https://brainly.com/question/12431044

#SPJ11

The population of the world in 1955 based on the model q(t) = 2.500[tex]e^{0.0168t}[/tex] is 2.54 billion.

The model q(t) = 2.500[tex]e^{0.0168t}[/tex] represents the world population in billions

Here, t represents the years after 1955 and e is exponential constant its value is approximately 2.718.

Here the population is growing exponentially means population is growing at faster rate.

To find the population of the world in 1955 we will take

t = 1

on putting the value of t in the given function q(t)

q(t) = 2.500e[tex]e^{0.0168(1)[/tex]

on solving the function q(t) we get

q(t) ≈ 2.54

so, the population of the world in 1955 is 2.54 billion

To know more about population click here :

https://brainly.com/question/27991860

#SPJ4

The volume of granola a cylindrical container can hold 5451.6 cubic centimeters if containers have a diameter of 20 cm and a height of 17. 4 cm.

The number of unit cubes (cubes of unit length) that can fit inside a cylinder determines its volume.

Identifying the radius (r) and height (h)
r = 10 cm
h = 17.4 cm

Calculating the volume (V) using the formula V = πr²h
V = π × (10 cm)² × 17.4 cm
V ≈ 3.14 × 100 cm² × 17.4 cm
V ≈ 5451.6 cm³

Approximately, a container will hold 5451.6 cubic centimeters of granola.

To learn more about volume: https://brainly.com/question/463363

#SPJ11

1. 8 added to four times the product of 4 and a number is greater than 32

1. x = 6

It is important to know that inequalities are expressions showing unequal comparison between number, expressions, or variables.

From the information given, we have that;

4x + 8 greater than 32.

This is represented as;

4x + 8 > 32

collect the like terms, we get

4x > 32 - 8

subtract the values

4x> 24

Divide both sides by the coefficient of x which is 4, we have;

x > 24/4

x > 6

Learn about inequalities at: https://brainly.com/question/25275758

#SPJ1

Answer:

3y^3-9y^2+6y

Step-by-step explanation:

= 3y^3-9y^2+6y

The solution of the trigonometric equation

cos(2x) = cos(x) + 2

is x = 180°

Here we want to solve the equation:

cos(2x) = cos(x) + 2

First, we know that:

cos(2x) = 2cos(x)²  - 1

Then we can rewrite:

2cos(x)²  - 1 = cos(x) + 2

We can define:

cos(x)= y

2y² - 1 = y + 2

Then we need to solve the quadratic:

2y² - 1 - y - 2  =0

2y² - y - 3 = 0

Using the quadratic formula we will get:

[tex]y = \frac{1 \pm \sqrt{(-1)^2 - 4*2*2*-3} }{2*2} \\\\y = \frac{1 \pm 5}{4}[/tex]

so the solutions are:

y = (1 + 5)/4 = 6/4

y = (1-  5)/4 = -1

And remember that y = cos(x), then y =  6/4 can be discarded.

Then the solution comes from:

cos(x) = -1

then x = pi = 180°

Learn more about trigonometric equations at:

https://brainly.com/question/24349828

#SPJ1

This requires an online learning algorithm that adapts to the changing costs of each expert and helps us make optimal choices

In this scenario, we can think of the slot machines as experts providing us with advice on which machine to play each day. The cost of taking advice from each expert, represented by cti, is the amount we lose by playing that particular machine.

To minimize our losses and regret, we want to choose the expert (i.e., slot machine) with the lowest cost each day. However, it's important to note that the cost of taking advice from each expert may change each day, so we need to constantly evaluate and adjust our choices.

To formalize this problem as an optimization task, we can use the concept of regret. Regret measures how much worse off we are by not knowing the best expert in advance. In other words, it's the difference between our cumulative losses if we always chose the best expert versus the losses we actually incur by following different experts each day.

To minimize our regret R, we need to choose the best expert as often as possible. One way to achieve this is by using an online learning algorithm that updates our choice based on the outcomes of each day's play. By continuously monitoring the performance of each slot machine, we can adjust our strategy and minimize our losses over time.

In summary, to minimize our losses while gambling at a casino, we need to treat each slot machine as an expert providing us with advice. We must choose the expert with the lowest cost each day and constantly update our strategy to minimize regret.

This requires an online learning algorithm that adapts to the changing costs of each expert and helps us make optimal choices.

To know more about algorithm refer here

https://brainly.com/question/31936515#

#SPJ11

The average speed that your brother was traveling is approximately 45.63 miles per hour

The average speed is the total distance traveled divided by the total time taken. So we have:

Average speed = total distance ÷ total time

We are given the total distance as 115 miles and the total time as 2.52 hours. Therefore, the average speed is:

Average speed = 115 miles ÷ 2.52 hours

Average speed = 45.63 miles per hour

So, the average speed that your brother was traveling is approximately 45.63 miles per hour.

To learn more about average speed, click here:

https://brainly.com/question/12322912

#SPJ11

The 95% confidence interval for the true proportion of families that own at least one television is (0.347, 0.542).,

The formula for the confidence interval of a proportion:

CI = p ± z* (√(p*(1-p)/n))

where:

p is the sample proportion (40/90 = 0.4444)

z* is the critical value of the standard normal distribution at the 95% confidence level (1.96)

n is the sample size (90)

Substituting the  values, we have

CI = 0.4444 ± 1.96 * (√(0.4444*(1-0.4444)/90))

CI = 0.4444 ± 1.96 * (√(0.00245))

CI = 0.4444 ± 1.96 * 0.0495

CI = 0.4444 ± 0.097

Hence, the 95% confidence interval for the true proportion of families that own at least one television is (0.347, 0.542) when rounded to three decimal places.

Learn more about standard normal distribution at: https://brainly.com/question/4079902\

#SPJ1

Answer:

f(-2) = 9

Step-by-step explanation:

f(x) = -3x + 3                  Solve for f(-2).

f(-2) = -3(-2) + 3

f(-2) = 6 + 3

f(-2) = 9

a) Area (Ф(R)) = 5184 (b) Area (Ф(R)) = 25920

Let J be the Jacobian of Ф. We have J = det(DФ) = det([3 9; 9 9]) = -72.

(a) For R = [0,9] × [0,6], we have

Ф(R) = {(3u+9v,9u+9v) | 0 ≤ u ≤ 9, 0 ≤ v ≤ 6}.

The area of Ф(R) is given by the double integral over R of the Jacobian:

Area (Ф(R)) = ∬R |J| dudv

= ∫0^9 ∫0^6 72 dudv

= 5184.

Therefore, the area of Ф(R) is 5184.

(b) For R = [2,20] × [1,17], we have Ф(R) = {(3u+9v,9u+9v) | 2 ≤ u ≤ 20, 1 ≤ v ≤ 17}. The area of Ф(R) is given by the double integral over R of the Jacobian:

Area (Ф(R)) = ∬R |J| dudv = ∫2^20 ∫1^17 72 dudv = 25920.

Therefore, the area of Ф(R) is 25920.

To learn more about integral click here

brainly.com/question/18125359

#SPJ11

AnswerAnswer:

Step-by-step explanation:

To determine the materials cost for the brooch, we need to know the area of each material used in the brooch. Let's say that the brooch is made up of a 5 cm x 5 cm square of silver, a 2 cm x 2 cm square of copper, and a 3 cm x 1 cm rectangle of stone.

The area of the silver sheet is 5 cm x 5 cm = 25 cm^2, so the cost of the silver is 25 cm^2 x $9.75/cm^2 = $243.75.

The area of the copper sheet is 2 cm x 2 cm = 4 cm^2, so the cost of the copper is 4 cm^2 x $3.25/cm^2 = $13.

The area of the stone is 3 cm x 1 cm = 3 cm^2, so the cost of the stone is 3 cm^2 x $1.75/cm^2 = $5.25.

Therefore, the total materials cost for the brooch is $243.75 + $13 + $5.25 = $262.

The value of the speed of the satellite in meters per second is,

⇒ Speed = 7.5 x 10³ m /sec

We have to given that;

A satellite orbiting Earth travels 4.95×10⁷ meters for each orbit.

And, It takes 6,600 seconds to make one orbit.

Hence, the speed of the satellite in meters per second is,

⇒ Speed = Distance / Time

⇒ Speed = 4.95×10⁷/ 6,600

⇒ Speed = 0.00075 x 10⁷

⇒ Speed = 7.5 x 10⁻⁴ x 10⁷

⇒ Speed = 7.5 x 10³ m /sec

Thus, The value of the speed of the satellite in meters per second is,

⇒ Speed = 7.5 x 10³ m /sec

Learn more about the scientific notation visit:

brainly.com/question/1767229

#SPJ1

The total area of the first floor of the tiny house is 121 square feet

The total area of the first floor of the tiny house can be expressed as the sum of the areas of each room. The area of a rectangle is calculated by multiplying the length by the width. Therefore, we can write:

Total area = Area of kitchen + Area of bathroom

The area of the kitchen is given by the product of the length and the width of the kitchen, which is 11 feet and 7 feet, respectively. Therefore, the area of the kitchen can be written as:

Area of kitchen = 11 x 7 = 77 square feet

Similarly, the area of the bathroom is given by the product of the length and the width of the bathroom, which is 11 feet and 4 feet, respectively. Therefore, the area of the bathroom can be written as:

Area of bathroom = 11 x 4 = 44 square feet

Substituting these expressions into the equation for the total area, we get:

Total area = Area of kitchen + Area of bathroom

= 77 + 44

= 121 square feet

Therefore, the total area of the first floor of the tiny house is 121 square feet, which can also be expressed as the sum of the areas of the kitchen and bathroom.

To know more about area, refer to the link below:

https://brainly.com/question/22563096#

#SPJ11

Answer:

m = -2

Step-by-step explanation:

We Know

Slope = rise/run or (y2 - y1) / (x2 - x1)

Pick 2 points (-3,2) (-2,0)

We see the y decrease by 2, and the x increase by 1, so the slope is

m = -2

A definite integral is defined as the signed area under a function between certain limits (bounds) of integration.

An indefinite integral represents the family of antiderivatives of a function and is also known as its general integral or antiderivative.

An indefinite integral represents the family of antiderivatives of a function and is also known as its general integral or antiderivative. An indefinite integral does not have specific limits of integration; its result includes a constant of integration (usually denoted +C), which accounts for all possible constant shifts within its antiderivative.

A definite integral is defined as the signed area under a function between certain limits (bounds) of integration. The real number that represents its net area between it and x-axis during an interval.

Read more on indefinite integral and definite integral here:https://brainly.com/question/27419605

#SPJ4

Answer:

72 + 7x + 24 = 180

7x + 96 = 180

7x = 84

x = 12

Point estimate of μ  [tex]26.15[/tex]

99% confidence interval: [tex](24.213, 28.087)[/tex]

Margin of error:[tex]1.437[/tex]

The point estimate of  (population mean) is calculated by finding the sample mean , which is the average of the given sample data. Adding up all the observations and dividing by the sample size (18), we get:

To make a 99% confidence interval for we can use the t-distribution and the sample mean. Since the sample size is 18, we have (18 - 1) = 17 degrees of freedom. Using a t-distribution table or a calculator, we find the critical value for a 99% confidence level and 17 degrees of freedom to be approximately 2.898.

Next, we calculate the standard error (SE) using the sample standard deviation (s) divided by the square root of the sample size .Assuming the population standard deviation is unknown, we estimate it using the sample standard deviation, which is approximately 3.858.

Learn more about population

brainly.com/question/15889243

#SPJ11

u = 28.8

The 99% confidence interval for μ is (27.01, 30.59).

28.4 + 27.3 + 25.5 + 25.5 + 31.1 + 23.0 + 26.3 + 24.6 + 28.4 + 37.2 + 23.9 + 28.7 + 27.9 + 25.1 + 27.2 + 25.3 + 22.6 + 22.7 = 518.3

The sample mean (or the point estimate of μ) is:

518.3 / 18 = 28.8

Calculate each data point's deviation from the mean, square it, and then sum up these values.

(28.4-28.8)² + (27.3-28.8)² + (25.5-28.8)² + (25.5-28.8)² + (31.1-28.8)² + (23.0-28.8)² + (26.3-28.8)² + (24.6-28.8)² + (28.4-28.8)² + (37.2-28.8)² + (23.9-28.8)² + (28.7-28.8)² + (27.9-28.8)² + (25.1-28.8)² + (27.2-28.8)² + (25.3-28.8)² + (22.6-28.8)² + (22.7-28.8)²

= 116.4

Divide by (n - 1), where n is the number of observations. In this case, n = 18, so n - 1 = 17.

So, the variance (s²) is 116.4 / 17 = 6.85 (approximately)

s = √6.85 = 2.62

CI = x ± (t * (s/√n))

CI = 28.8 ± (2.898 * (2.62/√18))

CI = 28.8 ± 1.79

So, the 99% confidence interval for μ is (27.01, 30.59).

Read more on confidence interval here https://brainly.com/question/15712887

#SPJ4

The maximum value represents (b) the point where most profits are made

Given that the graph is the graph of a company's profit

The maximum value represents (b) the point where most profits are made

Given that the graph is the graph of a company's profit

The x-intercept is when the profit = 0

So

The x-intercept represents (b) the price per pen where no profit is made

This is calculated as

Rate = [f(6) - f(3)]/[6 - 3]

So, we have

Rate = [0 - 120]/[6 - 3]

Rate = -40

The domain of this graph given the situation is (0, 6] because the values do not makes sense beyond those points

Read more about quadratic functions at

https://brainly.com/question/25841119

#SPJ1

it would take approximately 2,749 hours for a rocket traveling at 3.35×10⁴ kilometers per hour to travel from Earth to Mercury.

what is approximately ?

Approximately means "about" or "roughly". It is used to indicate that a number or value is not exact, but rather an estimate or approximation. When a value is given as approximately a certain number

In the given question,

To calculate the time it would take a rocket traveling at 3.35×10⁴ kilometers per hour to travel from Earth to Mercury, we need to divide the distance between Earth and Mercury by the speed of the rocket:

Time = Distance / Speed

Distance = 9.21×10⁷kilometers

Speed = 3.35×10⁴ kilometers per hour

Time = 9.21×10⁷ km / (3.35×10⁴ km/h)

Time = 2,748.66 hours

Rounding this value to the nearest whole number of hours gives:

Time = 2,749 hours

Therefore, it would take approximately 2,749 hours for a rocket traveling at 3.35×10⁴ kilometers per hour to travel from Earth to Mercury.

To know more about approximately  , visit:

https://brainly.com/question/30945002

#SPJ1