Please hurry and help please don’t send a link

Answer:

29.07778262 (i don't know what you have to round to, but just be aware of rounding)

Explanation:

to answer this you have to convert both elements into grams, you do this by finding their atomic weight on a periodic table then multiplying it by how many moles of the molecule you have, k=39.098 and S=32.06, so you have to multiply k by two since you have two moles, so now you know that k2=78.196. then add the two amounts together to get the total weight of the compound, 110.256, now that you have that you can create a proportion to solve for the percent, the proportion is equal to the mass of one element, in this case S, over the total weight of the compound, 110.256. then divide [tex]\frac{32.06}{110.256}[/tex] =.290777... this is your percent in decimal form, so multiply by 100 to get you percentage.

if you have any questions, leave them in the comments and i will try to answer them, if this helped, pls give brainliest

Answer:

velma is recommending the stronger soloution

Explanation:

because firstly velmas solution is more concentrated and the pH level of her solution is more Alkaline than shaggies solution

To solve this we must be knowing each and every concept related to isomer. Therefore, two  geometric isomers are possible for the complex [CrF[tex]_3[/tex]Br[tex]_3[/tex]]₃⁻.

An isomer is a chemical substance that has the same number and kinds of atoms like another chemical species that differs from it in terms of attributes due to the way the atoms are organized.

Stereoisomerism includes geometric isomerism. It is sometimes referred to as E-Z isomerism or cis-trans isomerism. Geometric isomerism is caused by cyclic compounds' constrained rotation around carbon-carbon double or single bonds.  The complex [CrF[tex]_3[/tex]Br[tex]_3[/tex]]₃⁻ has two  geometric isomers, one is facial and other is meridional.

Therefore, two  geometric isomers are possible for the complex [CrF[tex]_3[/tex]Br[tex]_3[/tex]]₃⁻.

To learn more about isomer, here:

https://brainly.com/question/28188244

#SPJ1

Answer:

The next step is prototype testing

Explanation:

The stages of the design process are;

1) Situation analysis

Paper based research is conducted on the situation to obtain the situation parameters

2) Brief writing

With the situation analysis developed above, the brief of the current situation is put down on paper

3) Problem research

The problem is researched and experimented on with the development of a paper based proof of the possible concept

4) Specification writing

The specifications of the problem are outlined

5) List the possible solutions

The possible solutions are brainstormed and listed

6) Preferred solution selection

The preferred solution is selected based on the constraints in the situation

7) Create working drawing/plan

The working design drawing of the selected solution or concept is completed and evaluated for applicability

8) Building of a prototype

The design is converted into a prototype which is a model of the actual solution

9) Testing of the prototype

The prototype is tested for functionality, for ability to work in the intended situation and/or in the intended system

10) Report writing

A report is made on the outcome of the tests for review before production

Therefore, after the prototype is created, stage 8, the next step is the testing of the prototype stage 9.

Answer:

mettaliods

Explanation:

It has the both property of metal and non metal so it is called mettaliod.

Answer:

metalloids

Explanation:

they are solid at roomtempreture and alloys with metals.

examples boron,silicon,arsenic,tellurium

The limiting reactant, O₂, forms 2.7 mole Al₂O₃. Therefore, the mass of Al₂O₃ is 280 g.

The term mole (M) is defined as the amount of substance in a system which include as many elementary entities as there are atoms present in it. It is denoted by the symbol “mol”. The word mole is coming from the Latin word moles, which means “a mass”.

Molar Mass of Al₂O₃ = 101.96 g/mol

2.7 mole Al₂O₃          101.96 g

------------------------  x  -------------------    

             X                       1 mole

= 280 g Al₂O₃

Thus, The limiting reactant, O₂, forms 2.7 mole Al₂O₃. Therefore, the mass of Al₂O₃ is 280 g.

To learn more about the mole, follow the link;

https://brainly.com/question/26416088

#SPJ1

The major organic product of this reaction is 2-bromobutane, a saturated hydrocarbon with a bromine atom attached to the second carbon atom.

The major organic product is 2-bromobutane.

Structure:

CH3 CH2 CH2 CH2 Br

    |   |   |

    CH3 CH2 Br

1) The reaction begins with bromine reacting with the 2-methylpropane molecule to form the intermediate 2-bromo-2-methylpropane.

2) The intermediate then reacts with hydroxide ions to form the final product, 2-bromobutane.

3) The final product is a saturated hydrocarbon with a bromine atom attached to the second carbon atom.

The major organic product of this reaction is 2-bromobutane, a saturated hydrocarbon with a bromine atom attached to the second carbon atom.

learn more about hydrocarbon here

https://brainly.com/question/17578846

#SPJ4

The importance of the carbon dioxide, CO₂ and the oxygen O₂ in the water is they both are important for the aquatic animals and for the aquatic plant.

The CO₂ and O₂ are both important for the aquatic animals and also for the aquatic plants. the concentration of the oxygen in to the water is important for the aquatic animals that the dissolved oxygen for the respiration. the carbon dioxide will be more soluble in water than the oxygen in the water.

The carbon dioxide forms the carbonic acid in the water. the carbon dioxide is useful for the aquatic plants for the growth.

To learn more about CO₂ and O₂ here

https://brainly.com/question/13381473

#SPJ4

'The temperature of the reaction mixture increases'  would be evidence that a chemical reaction took place.

What is a dilute solution?

A dilute solution is a solution that contains fewer solute particles than a more concentrated solution. Dilute solutions are generally less concentrated than more concentrated solutions and are often made by adding more solvent to the solution.

When a chemical reaction takes place, energy is released in the form of heat. This increase in temperature is basically known as an exothermic reaction. An increase in temperature is a sign that a chemical reaction has taken place, as the reaction mixture is absorbing the energy released from the reaction.

To know more about a dilute solution,

https://brainly.com/question/27097060

#SPJ4

Answer:

One problem that people may encounter when using a hot and cold compress pillow is that the pillow may not stay hot or cold for a long enough period of time. This can be frustrating for people who are using the pillow to alleviate muscle pain or reduce inflammation, as they may need to continually reheat or refreeze the pillow in order to maintain its therapeutic benefits. To solve this problem, people may need to find a pillow that is better at retaining heat or cold, or they may need to use additional heating or cooling elements (such as hot water bottles or ice packs) in conjunction with the pillow.

Explanation:

The total number of moles contained in 115 grams of C₂H5OH is 2.50 moles .

The term "mole" refers to the quantity of a substance that has the same amount of subatomic particles (ions, molecules, or atoms) as there are carbon atoms.

Atomic weight of carbon(C)= 12 gm

Atomic weight of Hydrogen (H)=1 gm

Atomic weight of oxygen (o)=16 gm

∴Molecula weight of C2H5OH =(12×2 + 1×6 + 16×1) gm

24 + 6 + 16 gm = 46 gm

∴ 46 gm of C2H5OH contains 1 mole

1 gm of C2H5OH contain = 1/46 moles

115 gm of C2H5OH contains = 115×1/46 moles

⇒2.5 moles

To know more about moles visit:

brainly.com/question/26416088

#SPJ1

After solving the equation: The half-life for this reaction is 0.693/0.271 = 2.56 s.

Reaction is the response of a system to an external or internal stimulus. It is the way a person or object behaves in response to a change in their environment. Reactions can be physical, chemical, or psychological. Physical reactions involve changes in the body, such as muscle tension, sweating, or heart rate.

The half-life for this reaction is the time it takes for the concentration of molecular iodine to decrease by a factor of 2, or for half of the original amount of molecular iodine to react. This can be calculated using the equation:

T1/2 = 0.693/k

where k is the first-order rate constant.

Therefore, the half-life for this reaction is 0.693/0.271 = 2.56 s.

To learn more about reaction
https://brainly.com/question/25769000
#SPJ4

Answer:

convection

Explanation:

Answer:

it turns into icecream

Answer:

0,5 moles

Explanation:

N = L × n

n = N ÷ L

n = 2,87 × 10²³ ÷ 6,02 × 10²³

n = 2,87 ÷ 6,02

n = 0,47 moles or 0,5 moles

If 87 grams of K₂SO₄ is dissolved in enough water to make 250 milliliters of solution,  the concentrations of the potassium [K⁺] is 4 M and the sulfate ions [SO₄²⁻] is 2 M.

The molar mass of the  K₂SO₄ = 174 g/mol

The mass of the  K₂SO₄ = 87 g

the moles of the  K₂SO₄ = 87 / 174

                                         = 0.50 mol

moles of K⁺ = 0.50 × 2

                    = 1 mol

moles of SO₄²⁻ = 0.50 × 1

                          = 0.50

The concentration of [K⁺] = 1 / 0.250 = 4 M

The concentration of [SO₄²⁻] =  0.50 / 0.250 = 2 M

To learn more about concentration here

https://brainly.com/question/19579038

#SPJ4

Answer:

look for evidence that the molecules are chiral.

Explanation:

The instrument with which optically active compounds are studied is a polarimeter, shown in the figure below. Imagine a horizontal line that passes through the zero of a coordinate system.

The product could have been lost if this experiment was conducted in a physical laboratory: Human Error, Incomplete Reaction, Inadequate Stirring, Impurities and Loss of Product.

Product is a tangible or intangible good that is produced for sale on the market.

1. Human Error: Inaccurate measurements or miscalculations during the experiment may have caused the percent yield not to be 100%.
2. Incomplete Reaction: Depending on the reaction conditions, it is possible that the reaction did not go to completion, leading to a lower percent yield than expected.
3. Inadequate Stirring: If the reactants were not adequately mixed during the experiment, some reactants may not have been able to properly react, resulting in a lower percent yield.
4. Impurities: If the reactants used in the experiment were impure, it could lead to a lower percent yield due to the presence of undesirable substances that can interfere with the reaction or are not involved in the reaction.
5. Loss of Product: If the experiment was conducted in a physical laboratory, it is possible that some of the product was lost during the experiment due to improper handling or other factors.

To learn more about product
https://brainly.com/question/29171025
#SPJ4

The volume of 0.145 M NaOH is required to reach the equivalence point in the titration of 45.0 mL of 0.105 M HNO₃ is 32.58 mL.

Given that :

the molarity of the HNO₃ , M1 = 0.105 M

the volume of the HNO₃ , V1 = 45 mL

the molarity of the NaOH , M2 = 0.145 M

the volume the NaOH , V2 = ?

by using the equation given below , we get:

M1 V1 = M2 V2

0.105 × 45 = 0.145 × V2

V2 = 4.725 / 0.145

V2 = 32.58 mL

Thus volume of the NaOH is 32.58 mL.

To learn more about volume here

https://brainly.com/question/13144728

#SPJ4

If the molecular weight is 230.26 g/mol carbon = 73.03% = 230.26*73.03/100 = 168.15/12 = 14 Carbons Hydrogen = 6.13% = 230.26*6.13/100 = 14/1 = 14 Hydrogens Oxigen = 20.84% = 230.26*20.84/100 = 47.98/16 = 3 Oxygens Hence the empirical formula is C14H14O3

The International System for Units (SI) defines the newton as the unit of force, which is used to measure weight. For instance, a kilogram of matter weighs around 9.8 newtons on Earth's surface and around each as much on Moon.

Weight, which is expressed in newtons, is a unit of measurement for the gravitational force acting on an object. The mass of a bird with a mass of 15 g changes with the strength of the gravity influence acting on it, and would differ significantly if it were measured, for instance, on the Moon rather than on Earth.

To know more about weight visit:

https://brainly.com/question/6853752

#SPJ4

Answer: The new temperature is 4768 K.

Explanation:

Given: [tex]T_{1}[/tex] = 298 K,    [tex]V_{1}[/tex] = V,        [tex]P_{1}[/tex] = P

[tex]T_{2}[/tex] = ?,           [tex]V_{2}[/tex] = 4V,           [tex]P_{2}[/tex] = 4P

Using the combined gas law formula as follows.

[tex]\frac{P_{1}V_{1}}{T_{1}} = \frac{P_{2}V_{2}}{T_{2}}[/tex]

Substitute the values into above formula as follows.

[tex]\frac{P_{1}V_{1}}{T_{1}} = \frac{P_{2}V_{2}}{T_{2}}\\\frac{P \times V}{298 K} = \frac{4P \times 4V}{T_{2}}\\T_{2} = 4768 K[/tex]

Thus, we can conclude that the new temperature is 4768 K.

the answer I think is the metamorphic rock

Answer:

metamorphic

Explanation:

sedimentary rocks under heat and pressure form metamoephoc rocks

The properties of the elements are repeated after 2 8 18 and 32 elements because these are the maximum number of the electrons that the four shells contains.

The electronic configuration of the elements in the periodic table are repeated because the maximum number of the electrons that the four shells can have are 2 8 18 and 32. the name of the four shells are K , L, M, N. The electronic configuration of the elements are repeated and due to this the properties of the elements are repeated.

Thus, the properties of the elements are increases because the electronic configuration are repeated in the periodic table.

To learn more about periodic table here

https://brainly.com/question/11155928

#SPJ4

Oxidation of methane to soot:

CH4(g)+O2(g)⟶C(s)+2H2O(g)

Among the hydrocarbons is methane, CH4(g). Only the elements carbon (C) and hydrogen (H) are present in the complex. When methane burns with too much oxygen, it produces water vapor and carbon dioxide gas CO2(g) (g). Complete combustion is defined as combustion with extra oxygen.

Methane can be partially oxidized into a variety of compounds when it is burned inefficiently, including CO, methanol, formic acid, formaldehyde, and higher hydrocarbons.

Carbon monoxide is an extremely toxic gas. It is invisible and odorless. Without anybody being aware of it, malfunctioning gas fireplaces or boilers can poison the air in a room by emitting carbon monoxide.

To know more about combustion click here

https://brainly.com/question/14335621

#SPJ4

The complete question is

Problems that can be caused by both the complete and incomplete

combustion of methane in a gas fire.