Biology College

Where would you expect to find the axon terminals of primary motor cortex neurons?

a. In the core of cerebrum

b. Within the nerves

c. next to muscle fibers

d. In the spinal cord

Answers

Answer 1

The axon terminals of primary motor cortex neurons are typically found within the nerves.

The correct answer to the given question is option b.

The primary motor cortex (M1) is a major component of the motor system in the brain that is responsible for the planning, control, and execution of voluntary movements. M1 neurons are pyramidal cells that send their axons down through the internal capsule, forming the corticospinal tract, which innervates the spinal cord and ultimately muscle fibers.

The axon terminals of M1 neurons are located at the ends of these axons, which make contact with the dendrites of other neurons or with muscle fibers at neuromuscular junctions. When an M1 neuron fires an action potential, it sends a signal down its axon to these terminals, which release neurotransmitters that activate the postsynaptic cells or muscles and cause movement.

M1 neurons have been shown to exhibit somatotopic organization, meaning that different regions of the cortex correspond to different parts of the body. The axon terminals of M1 neurons that control movements of the hand, for example, would be located in a different area than those that control movements of the leg.

For more such questions on axon, click on:

https://brainly.com/question/30636958

#SPJ8

Related Questions

Select the correct answer from each drop-down menu.
Fiona is writing a book on coral life. She is writing about the feeding pattern of corals. Help her complete the sentences.
as a byproduct of cellular respiration. The
The corals produce
and provide organic molecules as food to the corals.
Reset
Next
utilize this to carry out photosynthesis,

Answers

Fiona is writing a book on coral life. She is writing about the feeding pattern of corals. The corals produce as a byproduct of cellular respiration. The corals produce organic molecules and provide organic molecules as food to the corals. The corals utilize this to carry out photosynthesis.

Photosynthesis is the process in which plants, algae, and some bacteria convert light energy into chemical energy that they use to make food molecules from carbon dioxide and water. The feeding pattern of corals is symbiotic. In this pattern, a photosynthetic partner lives inside the coral's tissues.

The photosynthetic partner is either algae or photosynthetic bacteria. The photosynthetic partner uses the coral's waste products, mainly carbon dioxide and nitrogen, to make food molecules using light energy from the sun. These food molecules are then passed on to the coral.

The coral, in turn, provides the photosynthetic partner with nutrients in the form of ammonium, nitrate, and phosphorus. The organic molecules produced by the corals are used to provide energy to the corals. The corals use this energy to carry out various metabolic processes.

Some of these processes include cellular respiration, growth, and reproduction. The corals also use the energy to build their exoskeletons, which are made up of calcium carbonate. The corals utilize the organic molecules produced by the photosynthetic partner to carry out photosynthesis. Photosynthesis is the process in which the photosynthetic partner converts light energy into chemical energy.

The chemical energy is stored in the form of glucose. The corals then use this glucose to carry out metabolic processes. The relationship between the corals and the photosynthetic partner is mutualistic. The photosynthetic partner provides the coral with food, and the coral provides the photosynthetic partner with nutrients. This relationship is crucial for the survival of the coral reefs.

Know more about corals here :

brainly.com/question/31090127

#SPJ8

As a spider grows, basal cells in the midgut, a part of the spider's digestive tract, develop into secretory or digestive cells. Which statement best explains how different cells develop from the same basal cells?

Answers

The development of different cell types from the same basal cells in the spider's midgut is a result of cell differentiation. This process is regulated by various molecular signals and interactions, leading to the activation of specific genes and the acquisition of distinct cellular characteristics.

During the growth of a spider, the development of different cells from the same basal cells can be attributed to the process of cell differentiation. Cell differentiation is a fundamental process in which cells with the same genetic information acquire specific characteristics and functions. It involves the activation and repression of specific genes, leading to the formation of distinct cell types.

The basal cells in the midgut of a spider possess the potential to differentiate into different cell types. This differentiation process is regulated by various molecular signals and interactions within the cellular microenvironment. These signals can be influenced by both intrinsic factors, such as gene expression patterns, and extrinsic factors, such as the surrounding tissues or signaling molecules.

As the spider grows, certain signals are triggered that initiate the differentiation of basal cells into secretory or digestive cells in the midgut. These signals may include the activation of specific transcription factors or the exposure to signaling molecules that promote cell specialization.

Once the differentiation process is initiated, the basal cells undergo changes in gene expression patterns, leading to the acquisition of distinct cellular characteristics. These changes include the activation or repression of specific genes involved in secretory or digestive functions, resulting in the development of functional secretory or digestive cells.

For more such information on: basal cells

https://brainly.com/question/20059090

#SPJ8

Which of the following terms refers to the practical applications of scientific knowledge?

A.
Technology

B.
Scientific methods

C.
Medicine

D.
Systems science

Answers

Answer:

The term that refers to the practical applications of scientific knowledge is A. Technology.

Explanation:

Technology is the application of scientific knowledge to design and create new products, machines, and processes that make people's lives easier, safer, and more convenient. It involves the application of scientific knowledge to solve practical problems and create new technologies that improve people's lives. Technology is an essential part of modern life, and it is used in every aspect of our daily lives. Technology has become a necessary part of our world, from the cars we drive to the phones we use to communicate.

Analyze the predator-prey graph, describe how the carrying capacity of the elk changed with relationship to the wolf population?

Answers

To analyze the predator-prey graph and describe the change in the carrying capacity of the elk with respect to the wolf population, we need to consider the dynamics between the two populations over time.

In a typical predator-prey relationship, the population sizes of predators and prey often exhibit cyclical fluctuations. As the prey population (in this case, elk) increases, it provides a larger food supply for the predators (wolves), resulting in an increase in the predator population. However, as the predator population grows, it puts increased pressure on the prey population, leading to a decline in the prey numbers. This decline in prey availability then impacts the predator population, causing it to decrease as well. This cyclical pattern continues, creating oscillations in the populations.

The carrying capacity refers to the maximum population size that an ecosystem can sustain over the long term. It represents the equilibrium point at which the available resources (food, habitat, etc.) can support a stable population.

In the context of the predator-prey graph, the carrying capacity of the elk population can be seen as the peak or plateau of the elk population curve during each oscillation. The carrying capacity represents the maximum number of elk that the ecosystem can support when the wolf population is at a certain level.

Analyzing the graph, we can observe the following:

1. As the wolf population increases: Initially, with a lower wolf population, there may be a relatively higher carrying capacity for the elk population. This is because the wolf predation is not intense enough to significantly impact the elk population yet. The elk population can sustain a larger number, reaching a peak or plateau before starting to decline due to predation.

2. As the wolf population reaches its peak: As the wolf population increases and reaches its peak, the predation pressure intensifies on the elk population. This results in a decline in the elk population as it is being hunted by a larger number of wolves. The carrying capacity of the elk population starts to decrease as the predation pressure surpasses the capacity of the ecosystem to support a larger elk population.

3. As the wolf population declines: After reaching its peak, the wolf population starts to decline. This decline in the predator population reduces the predation pressure on the elk population. Consequently, the elk population starts to recover and grow, potentially reaching another peak or plateau.

Overall, the carrying capacity of the elk population changes in response to fluctuations in the wolf population. The carrying capacity decreases when the wolf population is high, leading to a decline in the elk population. Conversely, the carrying capacity increases when the wolf population is low, allowing the elk population to recover and grow. These dynamics illustrate the interconnected relationship and influence between predators and prey in an ecosystem.

How are pressure measurements related to weather prediction?
A. stable pressure indicates snowy weather
B. Low pressure indicates stormy weather
C. High, and also increasing, pressure indicates stormy weather
D. Decreasing pressure indicates a change in weather

Answers

B. Low pressure indicates stormy weather is how pressure measurements are related to weather prediction.

Weather forecasting involves utilizing technology and scientific expertise to predict the atmospheric conditions that will prevail in a specific location. Low-pressure areas, characterized by thinner air, are typically associated with specific wind patterns.

The movement of winds in these regions often results in the ascent of air, leading to cloud formation and condensation. Storms occurring in low-pressure areas tend to exhibit well-organized structures.

Active weather conditions are primarily caused by low-pressure systems. The relatively lighter air in these areas has a tendency to rise, leading to the creation of an unstable atmosphere.

Low-pressure systems are responsible for inducing active weather patterns, including gusty winds and rainfall, as well as potentially severe weather events.

Thus, option B is the correct answer.

To learn more about Weather forecasting,

https://brainly.com/question/8724387

Natural processes that add carbon to the atmosphere include: (check all that apply)

Burning of fossil fuels
ocean uptake
ocean loss
photosynthesis
plant respiration
animal respiration
soil respiration / decomposition by bacteria
volcanic activity
litter fall

Answers

The natural processes that add carbon to the atmosphere include:

- Burning of fossil fuels

- Ocean uptake

- Ocean loss

- Photosynthesis

- Plant respiration

- Animal respiration

- Soil respiration / decomposition by bacteria

- Volcanic activity

- Litter fall

Generally speaking, what is the direct function (purpose) of an action potential travelling down a skeletal muscle fiber?

a. To allow tropomyosin to unwind off of actin

b. To allow for the myosin heads to cycle

c. To allow calcium out of the SR

d. To open voltage gated sodium channels

Answers

The direct function of an action potential traveling down a skeletal muscle fiber is to allow for the myosin heads to cycle.

The correct answer is option B.

An action potential is an electrical signal that propagates along the membrane of a muscle fiber, triggering a series of events known as excitation-contraction coupling, which leads to muscle contraction. This process involves the interaction between the action potential, calcium ions, and the proteins within the muscle fiber.

When an action potential reaches the skeletal muscle fiber, it travels along the T-tubules, which are invaginations of the cell membrane that penetrate deep into the muscle fiber. These T-tubules are in close proximity to the sarcoplasmic reticulum (SR), a specialized network of tubules that stores calcium ions.

As the action potential reaches the T-tubules, it causes voltage-gated calcium channels on the SR to open. This allows calcium ions to flow out of the SR and into the muscle fiber's cytoplasm. The sudden increase in calcium concentration triggers the interaction between actin and myosin, the two proteins responsible for muscle contraction.

Calcium binds to the regulatory protein called troponin, which causes tropomyosin (not tropomyosin itself) to undergo a conformational change. This conformational change exposes the binding sites on actin, allowing the myosin heads to bind to actin and form cross-bridges.

Once the myosin heads are bound to actin, they undergo a series of cyclical interactions known as the cross-bridge cycle. This cycle involves the myosin heads pulling on the actin filaments, causing them to slide past each other and resulting in muscle contraction.

In summary, the primary function of an action potential traveling down a skeletal muscle fiber is to initiate the release of calcium ions from the sarcoplasmic reticulum. The presence of calcium allows for the interaction between actin and myosin, enabling the myosin heads to cycle and generate the force necessary for muscle contraction.

For more such information on: skeletal muscle

https://brainly.com/question/12252128

#SPJ8

In which structure do sperm cells develop to maturity?

Answers

Answer: Epididymis

Explanation: The sperms are stored in the spiral structure of the epididymis for maturation and then released.

Final answer:

Sperm cells mature in the structure called the seminiferous tubules within the testes. After developing in these tubules, the sperm move to the epididymis where they continue to mature and then during ejaculation, they exit the body via the vas deferens. This highlights the different stages of sperm development and maturity in the male reproductive system.

Explanation:

Sperm cells develop to maturity in a structure called the seminiferous tubules, which are coiled inside the testes. The least developed sperm are located at the periphery of the tubule, while the fully developed sperm are in the lumen. Within the walls of these tubules, the sperm cells are mixed with Sertoli cells, also referred to as 'nursemaid cells', which protect the germ cells and support their development.

Once the sperm cells have developed, they exit the seminiferous tubules and move to the epididymis where they continue their maturation process. The epididymis is a coiled tube located on the top and posterior of the testes. Upon ejaculation, the mature sperm leave the epididymis, travel through the vas deferens, and form the ejaculatory duct.

Learn more about Sperm maturation here:

https://brainly.com/question/32142337

#SPJ11

How does the cardiovascular system and respiratory system work with each other?

Answers

The circulatory system, which is made up of the heart and blood vessels, supports the respiratory system by bringing blood to and from the lungs. The circulatory system helps deliver nutrients and oxygen from the lungs to tissues and organs throughout the body.
Other Questions
625 C passes through a flashlight in 0.460 h. What is theaverage current? (d) (1) Discuss the isomenism exhibited by[Cu(NH_3)_4][P_2Cl_4] (ii) Sketch all the possibile isomers for (1) Students with names and top noteCreate a function that takes a dictionary of objects like{ "name": "John", "notes": [3, 5, 4] }and returns a dictionary of objects like{ "name": "John", "top_note": 5 }.Example:top_note({ "name": "John", "notes": [3, 5, 4] }) { "name": "John", "top_note": 5 }top_note({ "name": "Max", "notes": [1, 4, 6] }) { "name": "Max", "top_note": 6 }top_note({ "name": "Zygmund", "notes": [1, 2, 3] }) { "name": "Zygmund", "top_note": 3 } Write a recursive method that takes two integer number start and end. The method int evensquare2 (int start, int end) should return the square of even number from the start number to the end number. Then, write the main method to test the recursive method. For example:If start = 2 and end = 4, the method calculates and returns the value of: 22 42=64If start = 1 and end = 2, the method calculates and returns the value of: 22=4Sample I/O:Enter Number start: 2Enter Number end: 4Result = 64Enter Number start: 1Enter Number end: 2Result = 4 The early 1800s were a time of major economic and social change. What were the most positive changes to take place? What were the most significant problems? Do you think that the changes were more positive or negative? Explain your answer. [Calculation Question] Given a number A, which equals 1,048,576. Please find another number B so that the GCD (Greatest Common Divisor) of A and B is 1,024. This question has multiple correct answers, and you just need to give one. Please make sure you do not give 1,024 as your answer (no points will be given if your answer is 1,024). If you are sure you cannot get the right answer, you may describe how you attempted to solve this question. Your description won't earn you the full points, but it may earn some. A block slides down a ramp with an incline of 45 degrees, a distance of 50 cm along the ramp at constant velocity. If the block has a mass of 1.5 kg, how much thermal energy was produced by friction during this descent? Use g= 10 m/s2 the underlined phrase is an example of which of these poetic devices Calculate the volume occupied by 41.4 g of CO2 at40.8 oC and 0.772 atm. (R = 0.08206 L-atm/K-mol) In-Class 9-Reference Parameter FunctionsIn this exercise, you get practice writing functions that focus on returning information to the calling function. Please note that we are not talking about "returning" information to the user or person executing the program. The perspective here is that one function, like main(), can call another function, like swap() or calculateSingle(). Your program passes information into the function using parameters; information is passed back "out" to the calling function using a single return value and/or multiple reference parameters. A function can only pass back I piece of information using the return statement. Your program must use reference parameters to pass back multiple pieces of information.There is a sort of hierarchy of functions, and this assignment uses each of these:1. nothing returned by a function - void functions 2. 1 value returned by a function using a return value3. 2 or more values returned by a functiona. a function uses 2 or more reference parameters (void return value) b. a function uses a return value and reference parametersThe main() function is provided below. You must implement the following functions and produce the output below:1. double Max Numbers(double num1, double num2),a) Prompt and read 2 double in main()b) num and num2 not changedc) Return the larger one between num1 and num2 d) If num1 equals num2, return either one of them2. Int calcCubeSizes(double edgeLen, double&surfaceArea, double& volume); a)pass by value incoming value edgeLenb) outgoing reference parameters surfaceArea and volume are set in the functionc) return 0 for calculations performed properlyd) you return -1 for failure, like edgelen is negative or 03. int split Number(double number, int& integral, double& digital), a) pass by value incoming number as a doubleb) split the absolute value of incoming number in two parts, the integral part and digital (fraction) partc) outgoing reference parameters integral and digital are set in the function d) retrun 0 for calculation performed properly, return I if there is no fractional part, i.e. digital-0. And output "Integer number entered!"4. int open AndReadNums(string filename, ifstream&fn, double&num 1, double &num2); a) pass by value incoming file name as a stringb) outgoing reference parameter ifstream fin, which you open in the function using the filenamec) read 2 numbers from the file you open, and assign outgoing reference parameters numl and num2 with the numbers 3. You will do a 7-10 page Power point presentation with the following 1. Title Page 2. Problem, Statement - one paragraph 3. Problem Analysis - 2 slides - break dwn the problem 4. Solution Synthesis - Explain how you solve the problem 5. Implementation ad coding - Demo in class and Source code 6. Test and Evaluation - What could you have done better You may use www.repl.it to program your code. Your insurance company charges a premium of $2000 every quarterstarting from beginning of a year. You started your insurance on1st of February. How much would be your premium for the firstquarter? MY NOTES PRACTICE ANOTHER ANSWERS Nood Hala? HARMATHAP12 12.1.041.MI. 3 If the marginal revenue (in dollars per unit) for a month for a commodity is MR-0.6x +25, find the total revenue function. R(x) A uniform meter stick is pivoted about a horizontal axis through the 0.37 m mark on the stick. The stick is released from rest in a horizontal position. Calculate the initial angular acceleration of the stick. Water can be formed according to the equation: 2H2(g) + O2(g) 2HO(g) If 6.0 L of hydrogen is reacted at STP, exactly how many liters of oxygen at STP would be needed to allow complete reaction? (R= 0.0821 Latm/mol K) a)801 b)30L c)4.0 L d)12.0L e)10.0L Work as a team to design a program that will perform the following modifications to your timer circuit: A normally open start pushbutton, a normally closed stop pushbutton, a normally open "check results" pushbutton, an amber light, a red light, a Sim green light, and a white light should be designed in hardware and assigned appropriate addresses corresponding to the slot and terminal locations used. Submit your hardware design for review. When the start push button is pressed a one shot coil should be created in the red. program. When this one shot is solved to be true, the timer and counter values will be reset to zero (this should be in addition to the existing logic that resets these values). Program considerations: should this logic be implemented in parallel or series with the existing reset logic? 1. Hank, Tom and Jerry were solidarily liable to Mark in the amount of P60,000 payable on January 23, 2020. On January 23, 2020, Hank and Tom offered to pay, but Mark accepted Hank's offer and he (Hank) paid the whole amount to Mark. Supposed Jerry cannot reimburse Hank because he was declared to be insolvent, which of the following is correct:a. Tom shall be liable to Hank for P20,000b. Tom shall be liable to Hank for P30,000c. Tom shall not be liable to Hank.d. Tom shall be liable to Hank for P40,000 123S610Which statement describes gravity?There is no defined unit of measurement for gravity.O Gravity is the force that pulls objects toward Earth's center.Objects that have a small mass will have no gravitational pull.Gravitational pull between two objects decreases as the mass of one increases. What is the pH of the solution that results from titrating 42.2 mL of 0.3210MHI with 39.2 mL of 0.7987MLiOH ? The average value of a signal, x(t) is given by: 10 A = _lim 2x(1)dt T-10 Let xe (t) be the even part and xo(t) the odd part of x(t)- What is the solution for xo(l)? O a) A Ob) x(0) OcoPrevious question