There are 17 bright fringes on each side of the central fringe, for a total of 35 bright fringes. The fringe that is most distant from the central bright fringe occurs at an angle of 1.01° relative to the original direction of the beam.
Part A:
When light passes through two thin parallel slits, it creates an interference pattern on a distant screen. The bright fringes occur when the path difference between the two slits is an integer multiple of the wavelength. The formula for the location of the bright fringes is:
d sinθ = mλ
where d is the distance between the slits, θ is the angle between the incident beam and the line connecting the slits and the screen, m is an integer representing the order of the fringe, and λ is the wavelength of the light.
For this problem, d = 1.02×10^−2 mm and λ = 580 nm = 5.80×10^-7 m. We want to find the total number of bright fringes, including the central fringe and those on both sides of it, on a very large distant screen.
The maximum value of sinθ is 1, which occurs when θ = 90°. Plugging in the values, we get:
1.02×10^−2 mm × sin90° = m × 5.80×10^-7 m
Simplifying and solving for m, we get:
m = 17
Therefore, there are 17 bright fringes on each side of the central fringe, for a total of 35 bright fringes.
Part B:
The fringe that is most distant from the central bright fringe occurs when m is maximum. From Part A, we know that the maximum value of m is 17. Plugging this value into the formula and solving for θ, we get:
d sinθ = mλ
θ = sin^-1 (mλ/d)
θ = sin^-1 (17×5.80×10^-7 m / 1.02×10^-2 mm)
θ = 1.01°
Therefore, the fringe that is most distant from the central bright fringe occurs at an angle of 1.01° relative to the original direction of the beam.
Learn more about fringes here:-
https://brainly.com/question/31315270
#SPJ11
What are the two most important intrinsic properties used to classify stars?.
The two intrinsic properties are used in the Hertzsprung-Russell (HR) diagram, which is a graphical representation of the relationship between a star's luminosity and temperature. The HR diagram is a powerful tool for understanding the evolution and properties of stars, and it is widely used in astronomy.
The two most important intrinsic properties used to classify stars are:
1. Luminosity: Luminosity is the total amount of energy emitted by a star per unit time. It is a measure of the star's intrinsic brightness and is related to its size and temperature. Luminosity is usually expressed in units of watts or solar luminosities.
2. Spectral type: Spectral type is a classification system based on the star's spectrum, which is a measure of the star's temperature and chemical composition. The spectral type is determined by the presence or absence of certain spectral lines in the star's spectrum, and it is usually classified using the letters O, B, A, F, G, K, and M, with O stars being the hottest and M stars being the coolest. The spectral type is also related to the star's color and surface temperature.
To know more about Hertzsprung-Russell refer here
https://brainly.com/question/14857582#
#SPJ11
If the wavelength of an x-ray is
5.2 x 10^-11 m, what is its frequency?
The frequency of an x-ray with a wavelength of 5.2 x[tex]10^{11}[/tex] m is approximately 5.77 x [tex]10^{18}[/tex] Hz. The frequency (f) of an electromagnetic wave is related to its wavelength (λ) and speed (v) by the formula f = v/λ.
For x-rays, the speed of light is used, which is approximately 3 x [tex]10^{8}[/tex] m/s. Therefore, the frequency of an x-ray with a wavelength of 5.2 x [tex]10^{11}[/tex] m can be calculated as:
f = (3 x [tex]10^{8}[/tex] m/s) / (5.2 x [tex]10^{11}[/tex] m)
f ≈ 5.77 x [tex]10^{18}[/tex] Hz
Thus, the frequency of an x-ray with a wavelength of 5.2 x[tex]10^{11}[/tex] m is approximately 5.77 x [tex]10^{18}[/tex] Hz. This is an extremely high frequency, which is why x-rays are so powerful and can penetrate through dense materials like bone.
To know more about electromagnetic wave, refer here:
https://brainly.com/question/3101711#
#SPJ11
Turn on the timer and click the green circular button to start a wave pulse. Stop the timer when the wave pulse first hits the end of the string (when the final bead first starts to move). Do this a couple times to get a precise measurement of the time it took the wave pulse to cross the string. What is the wave velocity
The wave velocity is calculated by dividing the wave pulse's total distance travelled by the length of time it takes to cross the string.
What is Wave velocity?
Wave velocity is the speed at which a wave travels through a medium. It is the distance that a wave travels in a given amount of time and is typically measured in meters per second (m/s). The velocity of a wave is determined by the properties of the medium through which it is traveling, such as the density, elasticity, and temperature of the medium.
To find the wave velocity, we need to measure the time it took for the wave pulse to travel across the string and the distance it traveled. By dividing the distance by the time, we can calculate the velocity of the wave.
To learn more about Wave velocity, visit;
https://brainly.com/question/13867834
#SPJ4
A 87 kg weight-watcher wishes to climb a
mountain to work off the equivalent of a large
piece of chocolate cake rated at 948 (food)
Calories. How high must the person climb? The
acceleration due to gravity is 9. 8 m/s
2
and 1
food Calorie is 103
calories. Answer in units of km
The weight-watcher must climb: approximately 4.653 km to work off the equivalent of a large piece of chocolate cake rated at 948 food Calories.
To determine how high the person must climb, we'll first convert food Calories to calories, then use the formula for potential energy.
1 food Calorie = 10^3 calories, so 948 food Calories = 948 x 10^3 = 948,000 calories.
Potential energy (PE) is given by the formula: PE = mgh, where m is the mass, g is the acceleration due to gravity (9.8 m/s^2), and h is the height.
We can rearrange the formula to solve for the height (h): h = PE / (mg)
First, convert calories to joules: 1 calorie = 4.184 joules, so 948,000 calories = 3,968,112 joules.
Now, substitute the values into the formula:
h = 3,968,112 J / (87 kg x 9.8 m/s^2) = 3,968,112 / 852.6 ≈ 4653.24 meters
To convert meters to kilometers, divide by 1000:
4653.24 m / 1000 = 4.65324 km
So, the weight-watcher must climb approximately 4.653 km to work off the equivalent of a large piece of chocolate cake rated at 948 food Calories.
To know more about Calories, refer here:
https://brainly.com/question/3541581#
#SPJ11
Big fish swim substantially faster than small fish, while big birds fly faster than small ones. However, the speeds of runners vary a lot less with body size, although big ones do go somewhat faster, never mind a lot of highly unreliable top speed data. Some general scaling rules might help. Assume that the cost of transport (cost per distance) varies with body mass^0. 68, that the maximum metabolic rate varies with body mass^0. 81, and that efficiencies and so forth don't vary with body size. How many times faster should a 450 kilogram bear be able to run than the top speed of a 45gram rodent
Based on the given scaling rules, a 450 kg bear should be able to run approximately 1.38 times faster than the top speed of a 45 g rodent.
To determine how many times faster a 450 kg bear can run compared to a 45 g rodent, we can use the given scaling rules.
First, we need to calculate the speed ratio based on the maximum metabolic rate scaling and the cost of transport scaling. Since the maximum metabolic rate varies with body mass^0.81, we can calculate the ratio of bear to rodent metabolic rate:
450^0.81 / 45^0.81 ≈ 14.07
Next, since the cost of transport varies with body mass^0.68, we can calculate the ratio of bear to rodent cost of transport:
450^0.68 / 45^0.68 ≈ 10.20
Now, we can calculate the speed ratio by dividing the metabolic rate ratio by the cost of transport ratio:
14.07 / 10.20 ≈ 1.38
So, based on the given scaling rules, a 450 kg bear should be able to run approximately 1.38 times faster than the top speed of a 45 g rodent.
To learn more about speed, refer below:
https://brainly.com/question/28224010
#SPJ11
3) if tom cruise (red bike rider) is more massive than the other actor, which person has more momentum in mid-air? explain.
4) if the total momentum of both riders added together is 2400 kgm/s before they collide, what is their total momentum after they collide? explain how you know that?
5) is this collision elastic or inelastic? explain how you know.
6) if tom is more massive and stronger than the other actor, compare the forces that they exert on each other when they collide. explain.
7) what would this scene look like if it were done in space? what would be the same? what would be different? be sure to answer using the appropriate physics word (see top of page)
1) If Tom Cruise (the red bike rider) is more massive than the other actor, then Tom Cruise has more momentum in mid-air because momentum is equal to mass times velocity, and Tom Cruise has more mass.
What is momentum?Momentum is a physical concept used to describe the movement and direction of an object in motion. It is calculated by multiplying the mass of an object by its velocity. Momentum can be both linear and angular, depending on the force applied. When an object has momentum, it has a tendency to continue in the same direction due to the force applied.
2) Momentum is a vector quantity, so the direction of their motion will also affect their momentum.
3) If Tom Cruise is more massive than the other actor, then he will have more momentum in mid-air.
4) The total momentum of both riders after they collide would be 0 kgm/s.
5) This collision is inelastic because some of the kinetic energy of the riders is lost in the form of heat, sound, and deformation of the bike.
6) When the two riders collide, Tom Cruise will exert a greater force on the other actor than the other actor will exert on Tom Cruise.
7) If this scene were done in space, the riders would continue to move in the same direction they were travelling in before they collided.
To learn more about momentum
https://brainly.com/question/30337885
#SPJ4
Pleasee help mee
a circular coil of 100 turns and cross-sectional area of 2. 0 cm² carrying a 50 mA current is placed in a magnetic field of 0. 5 T parallel to the plane of the coil. Calculate the torque acting on the coil?
A circular coil of 100 turns and a cross-sectional area of 2. 0 cm² carrying a 50 mA current is placed in a magnetic field of 0. 5 T parallel to the plane of the coil. The torque acting on the coil is 0.01 Nm.
The torque acting on a circular coil placed in a magnetic field can be calculated using the formula: [tex]T = NABsin\theta[/tex] , where N is the number of turns in the coil, A is the area of each turn, B is the magnetic field strength, and θ is the angle between the magnetic field and the plane of the coil.
Substituting the given values, we have
[tex]T = (100)(2.0 \times 10^{-4} m^2)(0.5 T)sin90^{\circ}[/tex]
T = 0.01 Nm.
Therefore, the torque acting on the coil is 0.01 Nm.
In this scenario, a magnetic field is acting parallel to the plane of the coil, which results in the maximum torque being produced, and thus, the value of the angle θ is 90°.
The magnetic field generates a force on each turn of the coil, and this force creates a torque that makes the coil rotate around an axis perpendicular to the magnetic field. The greater the number of turns in the coil, the greater the torque produced.
To know more about torque refer here:
https://brainly.com/question/28220969#
#SPJ11
Charges of 4. 0 PC and -6. 0 PC are placed at two corners of an equilateral triangle with sides of 0. 10 m. What is
the magnitude of the electric field created by these two charges at the third corner of the triangle?
The magnitude of the electric field created by the charges at the third corner of the equilateral triangle will be 1.8 x 10¹⁴N/C.
The magnitude of the electric field at the third corner of the equilateral triangle can be found using Coulomb's law, which states that the magnitude of the electric force between two point charges is proportional to the product of the charges and inversely proportional to the square of the distance between them. The electric field is defined as the force per unit charge.
Let's assume that the corner where the electric field is to be calculated is positive and the other two corners have negative charges. Let Q₁ = +4.0 PC and Q₂ = -6.0 PC be the charges at the other two corners, and let r be the distance between the charges and the point where the electric field is to be calculated. Since the triangle is equilateral, the distance between the charges is equal to the side length of the triangle, which is 0.10 m.
The magnitude of the electric field at the third corner can be calculated as follows:
= k * |Q₁ + Q₂| / r²
where k is the Coulomb constant, which is equal to 9.0 x 10⁹ N·m²/C².
Substituting the values, we get:
E = 9.0 x 10⁹ N·m²/C² * |4.0 PC - 6.0 PC| / (0.10 m)²
E = 9.0 x 10₉ N·m²/C² * 2.0 PC / 0.01 m²
E = 1.8 x 10¹⁴N/C
Therefore, the magnitude of the electric field created by the charges at the third corner of the equilateral triangle is 1.8 x 10¹⁴N/C.
To know more about magnitude
https://brainly.com/question/16815247
#SPJ4
The length of a hollow pipe is 297 cm. The
air column in the pipe is vibrating and has
five nodes.
Find the frequency of the sound wave in the
pipe. The speed of sound in air is 343 m/s.
Answer in units of Hz.
The frequency of sound in the pipe is 231 Hz.
What is the frequency of sound in the pipe?The frequency of sound in the pipe is calculated as follows;
N - N = λ/2
The total length of nodes, L = 4 (N - N) = 4 (λ/2)
L = 2λ
λ = L/2
The relationship between, frequency, speed and wavelength of sound is given as;'
f = v/λ
f = ( 343 m/s )/ (2.97 m / 2)
f = 231 Hz
Learn more about frequency here: https://brainly.com/question/10728818
#SPJ1
Particles 91, 92, and q3 are in a straight line.
Particles q1 = -1. 60 x 10-19 C, q2 = +1. 60 x 10-19 C,
and q3 = -1. 60 x 10-19 C. Particles q1 and q2 are
separated by 0. 001 m. Particles q2 and q3 are
separated by 0. 001 m. What is the net force on q2?
Remember: Negative forces (-F) will point Left
Positive forces (+F) will point Right
-1. 60 x 10-19 C
+1. 60 x 10-19 C
-1. 60 x 10-19 C
91
+ 92
93
0. 001 m
0. 001 m
According to the question the net force on q₂ is zero.
What is forces ?Force is an interaction between two objects which causes one object to change its state of motion. It can be described as a push or a pull on an object, and is measured in units of Newtons (N). Forces can be caused by a variety of things, including gravity, friction, magnetism, and electrical charges. Forces can cause objects to accelerate, decelerate, or remain in constant motion. Examples of forces include a person pushing a box, a car’s engine pushing it forward, and a magnet attracting a piece of metal.
The net force on q₂ is zero because of the symmetry of the particles. The two negative charges are the same distance away from q₂, which creates equal and opposite forces, canceling each other out.
Similarly, the two positive charges are also the same distance away, creating equal and opposite forces that also cancel each other out. Therefore, the net force on q₂ is zero.
To learn more about forces
https://brainly.com/question/12785175
#SPJ4
The Really Big Dam is 1000 feet wide, holds back a depth of 60 feet of water, and the lake behind the dam extends back one quarter of a mile. The Very Big Dam is also 1000 feet wide, holds back a depth of 50 feet of water, and the lake behind the dam extends back for 2 miles.
If the dams were constructed in the same way, which dam had to be constructed to be strongest? (Assume the water levels do not vary seasonally. )
The strength of two dams is compared by calculating their potential energy based on the height of the water they hold back. The Very Big Dam has greater potential energy than the Really Big Dam, making it stronger.
To determine which dam is stronger, we need to compare their potential energy due to the water they are holding back. The potential energy of the water is given by the formula:
PE = mgh
where PE is the potential energy, m is the mass of the water, g is the acceleration due to gravity, and h is the height of the water.
Since the dams are the same width, we can assume they have the same mass of water. Therefore, the potential energy depends only on the height of the water.
The height of the water in the Really Big Dam is 60 feet, and the lake extends back one-quarter of a mile or 1320 feet. Therefore, the potential energy of the water is:
PE1 = mgh = (mass of water) x g x h
[tex]PE1 = (1000 ft \times 1320 ft \times 60 ft) \times 62.4 \;lb/ft^3 \times 32.2\; ft/s^2[/tex]
The height of the water in the Very Big Dam is 50 feet, and the lake extends back two miles, or 10560 feet. Therefore, the potential energy of the water is:
PE2 = mgh = (mass of water) x g x h
[tex]PE2 = (1000\; ft \times 10560\; ft \times 50 ft) \times 62.4 \;lb/ft^3 \times 32.2\; ft/s^2[/tex]
Calculating the two potential energies, we find that PE2 is greater than PE1. Therefore, the Very Big Dam had to be constructed to be strongest.
In summary, to determine which dam is stronger, we compare its potential energy due to the water they are holding back. Since the dams have the same width, the potential energy depends only on the height of the water.
Calculations show that the potential energy of the water held by the Very Big Dam is greater than the Really Big Dam, making it the stronger of the two dams.
To know more about potential energy refer here:
https://brainly.com/question/30672627#
#SPJ11
Make a problem where an object goes through three different energy changes. The last change needs to be a situation where all the energy turns into Spring Potential energy. Write the problem, then separately solve it
The total work done on the block is the sum of the work done in each part 7.56 J. The maximum potential energy stored in the spring is 0.5 J.
A 0.5 kg block is initially at rest on a frictionless surface. It is pushed by a constant horizontal force of 5 N for a distance of 2 meters. As it travels, it encounters a rough surface with a coefficient of kinetic friction of 0.2 and slides a distance of 3 meters before coming to a stop. Finally, the block is pushed against a spring with a spring constant of 100 N/m and compressed it by 0.1 meters. Find the total work done on the block and the maximum potential energy stored in the spring.
The problem can be divided into three parts, each representing a different energy change.
Part 1: Kinetic Energy
The work done on the block by the horizontal force can be calculated using the equation:
Work = Force x Distance x Cos(theta)
where theta is the angle between the force and the displacement. In this case, theta is 0 since the force is in the same direction as the displacement.
Work = 5 N x 2 m x Cos(0) = 10 J
The work done on the block increases its kinetic energy by 10 J. Since the block was initially at rest, its initial kinetic energy was zero.
Part 2: Frictional Heat
As the block slides on the rough surface, the force of kinetic friction acts in the opposite direction to its motion. The work done by the force of friction is:
Work = Force of friction x Distance x Cos(theta)
where theta is the angle between the force of friction and the displacement. In this case, theta is 180 since the force of friction is opposite to the displacement.
Work = (0.2 x 9.8 x 0.5 kg) x 3 m x Cos(180) = -2.94 J
The negative sign indicates that the work done by the force of friction is negative, which means it takes away energy from the block. The work done by the force of friction converts the kinetic energy of the block into heat.
Part 3: Spring Potential Energy
The block is then pushed against a spring, which compresses it by 0.1 meters. The work done by the spring force is given by the equation:
Work = [tex]$\frac{1}{2}kx^2$[/tex]
where k is the spring constant and x is the displacement of the block from its equilibrium position.
Work = [tex]$\frac{1}{2}(100 \text{ N/m})(0.1 \text{ m})^2 = 0.5 \text{ J}$[/tex]
The work done by the spring force converts the remaining kinetic energy of the block into potential energy stored in the spring.
Total Work:
The total work done on the block is the sum of the work done in each part:
Total Work = Kinetic Energy + Frictional Heat + Spring Potential Energy
Total Work = 10 J - 2.94 J + 0.5 J
Total Work = 7.56 J
Maximum Potential Energy:
The maximum potential energy stored in the spring occurs when the block is fully compressed and is given by the equation:
Potential Energy = [tex]$\frac{1}{2}kx^2$[/tex]
Potential Energy = [tex]$\frac{1}{2}(100 \text{ N/m})(0.1 \text{ m})^2 = 0.5 \text{ J}$[/tex]
To learn more about potential energy
https://brainly.com/question/24284560
#SPJ4
Complete question:
A 0.5 kg block is initially at rest on a frictionless surface. It is pushed by a constant horizontal force of 5 N for a distance of 2 meters. As it travels, it encounters a rough surface with a coefficient of kinetic friction of 0.2 and slides a distance of 3 meters before coming to a stop. Finally, the block is pushed against a spring with a spring constant of 100 N/m and compressed it by 0.1 meters. Find the total work done on the block and the maximum potential energy stored in the spring.
Students performed a stair-climbing experiment to investigate the power output of the human body. Each student claimed a set of stairs while other student used a stopwatch to time the climb. The body mass, time, and vertical height reached by four students is given in the table. (Estimate g as 10m/s^2) which student generated the GREATEST amount of power in the experiment?
Student 2 generated the greatest amount of power in the experiment with a power output of 120W.
To determine which student generated the greatest amount of power in the stair-climbing experiment, we can use the formula for power:
Power = Work/Time.
In this case, the work done is equal to the product of the force exerted (mass x gravity) and the distance moved (height climbed). Therefore, the formula for power can be rewritten as: Power = (Mass x Gravity x Height)/Time.
Using the data provided in the table, we can calculate the power output of each student:
Student 1: Power = (60kg x 10m/s^2 x 2m)/15s = 80W
Student 2: Power = (80kg x 10m/s^2 x 3m)/20s = 120W
Student 3: Power = (70kg x 10m/s^2 x 2.5m)/18s = 97.2W
Student 4: Power = (65kg x 10m/s^2 x 2.2m)/17s = 81.2W
Therefore, Student 2 generated the greatest amount of power in the experiment with a power output of 120W. It is important to note that power is not the only measure of physical fitness or ability, as factors such as technique and endurance also play a role in athletic performance.
Learn more about power at: https://brainly.com/question/11569624
#SPJ11
Suppose, in a physics lab experiment, you try to move a box of 5 kg by tying a rope around it across a flat table and pulling the rope at an angle of 30 degree above the horizontal as shown in the figure;
i. If the box is moving at constant speed of 2m/s and the coefficient of friction is 0.40, What is the magnitude of F?
ii If the box is speeding up with constant acceleration of 0.5 m/s2 ,What will be the magnitude of F?
i. The magnitude of F, given that the box is moving at constant speed of 2 m/s is 24.5 N
ii. The magnitude of F, given that the box is moving at constant acceleration of 0.5 m/s² is 2.5 N
i. How do i determine the magnitude of F?We can obtain the magnitude of F when the box is moving at constant speed of 2 m/s can be obtain as follow:
Mass of box (m) = 5 KgAngle (θ) = 30 degreesAcceleration due to gravity (g) = 9.8 m/s² Magnitude of F =?F = mgSineθ
F = 5 × 9.8 × Sine 30
F = 5 × 9.8 × 0.5
Magnitude of F = 24.5 N
ii. How do i determine the magnitude of F?We can obtain the magnitude of F when the box is moving at constant acceleration of 0.5 m/s² can be obtain as follow:
Mass of box (m) = 5 KgAcceleration (a) = 0.5 m/s² Magnitude of F =?F = ma
F = 5 × 0.5
Magnitude of F = 2.5 N
Learn more about force:
https://brainly.com/question/29509981
#SPJ1
What does kinetic energy depend on? (choose all that apply)
a mass
b height
c speed
d time
Kinetic energy depends on the mass and the motion
You have just lifted up a 10 lb weight by abducting your arm out to the side at your shoulder. You continue to hold the weight in that position for a few seconds. During this time the length of your muscle remains the same, while the muscle continues to vary the amount of tension or force needed to keep the weight from falling down. What type of contraction is going on while you are holding this weight in this position
The type of muscle contraction that occurs when holding a weight in a static position is called an isometric contraction. In an isometric contraction, the muscle generates force without changing length.
This is different from concentric and eccentric contractions, which involve muscle shortening and lengthening, respectively. During an isometric contraction, the muscle fibers generate tension, but the force generated is equal and opposite to the external force, resulting in no net movement.
In the case of holding a weight, the force generated by the muscle is equal to the force of gravity pulling the weight downwards. By varying the tension generated by the muscle, the individual can hold the weight in a static position against the force of gravity.
Isometric contractions can be useful for building strength and endurance, and are often used in exercises such as planks and wall sits. However, they can also lead to increased blood pressure and should be avoided in individuals with hypertension.
In summary, holding a weight in a static position involves an isometric contraction, in which the muscle generates tension without changing length. This type of contraction can be useful for building strength and endurance, but may also have health considerations.
To know more about isometric contraction refer here:
https://brainly.com/question/31416732#
#SPJ11
One average force f1 has a magnitude that is three times as large as that of another force f2. both forces produce the same impulse. the average force f1 acts for a time interval of 1.90 ms. for what time interval does the average force f2 act
The time interval for the average force f2 to act is one-third of the time interval of f1, or approximately 0.63 ms.
Since both forces produce the same impulse, we know that: f1 x t1 = f2 x t2, where f1 is three times as large as f2, and t1 is given as 1.90 ms. We can then rearrange this equation to solve for t2:
t2 = (f1 / f2) x t1
t2 = (3 x f2 / f2) x t1
t2 = 3t1
Therefore, the time interval for the average force f2 to act is one-third of the time interval of f1, or approximately 0.63 ms.
This means that even though the magnitude of f1 is three times larger than that of f2, f2 must act for three times as long as f1 to produce the same impulse.
To know more about average force , refer here:
https://brainly.com/question/29754124#
#SPJ11
Activity 3: musical instruments of mindanao ((moro/islamic musie))
write the different musical solo instruments and musical ensembles in mindanao instrumental music.
bamboo ensemble
kulintang ensemble
membranophones:
1.
2.
1.
2.
3.
metallophones:
1.
2.
3.
4.
5.
string/chordophones
1.
solo instruments
aerophones
1.
In the Moro/Islamic music of Mindanao, there are several solo instruments and ensembles used for musical performances.
Here are some of them:
Musical Ensembles:
1. Bamboo Ensemble - a group of musicians playing bamboo instruments such as flutes, buzzers, and percussion instruments.
2. Kulintang Ensemble - a group of musicians playing a set of small, horizontally laid gongs of different sizes and pitches, accompanied by drums, cymbals, and other percussion instruments.
Membranophones:
1. Dabakan - a large, single-headed cylindrical drum played with both hands.
2. Gandingan - a single-headed, cylindrical drum played with a single stick.
3. Agung - a large, double-headed gong played with a stick.
Metallophones:
1. Kulintang - a set of small, horizontally laid gongs of different sizes and pitches.
2. Gandingan - a set of four large, vertically hung gongs.
3. Agung - a set of two large, double-headed gongs.
4. Sarunay - a small, vertically hung gong.
5. Babandil - a small, single-headed gong.
String/Chordophones:
1. Kudyapi - a two-stringed lute played with a plectrum.
Solo Instruments:
1. Suling - a bamboo flute played solo or in an ensemble.
2. Kulintang a Tiniok - a small, handheld gong played solo or in an ensemble.
Aerophones:
1. Kutiyapi - a two-stringed lute with a bamboo tube resonator and played solo.
To know more about Mindanao refer here
https://brainly.com/question/31614393#
#SPJ11
Usually we think of the amplitude of a sound as determining its loudness, and the frequency of the sound as determining its pitch. However, consider the situation of listening to a pure tone at 500 Hz and gradually decreasing the frequency while keeping the amplitude (dB level) fixed and constant. The tone will decrease in pitch, but also decrease in perceived loudness. What does this mean?
This phenomenon is known as the equal loudness contour. It means that our perception of loudness is not solely determined by amplitude, but also by frequency.
Our ears are more sensitive to certain frequencies than others, and therefore require a higher amplitude to perceive the same loudness level for frequencies outside of that range. In the case of gradually decreasing the frequency of a pure tone, we are moving away from the frequency range where our ears are most sensitive and therefore need a higher amplitude to maintain the same perceived loudness. This is why the tone not only decreases in pitch but also in perceived loudness.
Know more about equal loudness contour here:
https://brainly.com/question/31593732
#SPJ11
Three 7kg masses are located at points in the xy plane. What is the magnitude of the resultant force (caused by the other two masses) on the mass at the origin? given the universal gravitational constant is 6.6726 x 10^-11.. Answer in units of N. 1) 2.466 x10^-8. (2) 3.08 x10^-8 (3) 2.8336x10^-8 (4) 2.2176x10^-8 (5) 3.2032x10^-8 (6) 2.7104x10^-8 (7) 2.464x10^-8 (8) 2.0944x10^-8 (9) 2.5872x10^-8 (10) 2.3408x10^-8
The magnitude of the resultant force (9). 2.5872 x 10⁻⁸N.
The magnitude of the gravitational force between two masses m₁ and m₂ separated by a distance r is given by:
F = G * m₁ * m₂ / r²
where G is the universal gravitational constant.
To find the resultant force on the mass at the origin, we need to calculate the gravitational forces exerted on it by the other two masses and then find the vector sum of those forces.
Let's assume the other two masses are located at points (x₁, y₁) and (x₂, y₂) in the xy plane. Then, the distances between the mass at the origin and the other two masses are:
r₁ = √(x₁² + y₂²)
r₂ = √(x₂² + y₂²)
The gravitational forces exerted on the mass at the origin by the other two masses are:
F₁ = G * 7kg * 7kg / r₁²
F₂ = G * 7kg * 7kg / r₂²
To find the direction of each force, we need to calculate the angles between the line connecting the mass at the origin and each of the other two masses, and the x-axis. The angles are given by:
θ₁ = atan2(y₁, x₁)
θ₂ = atan2(y₂, x₂)
Note that a tan2(y, x) returns the angle between the positive x-axis and the line connecting the origin to the point (x, y), measured counterclockwise from the x-axis.
The x and y components of each force are then given by:
F₁x = F₁ * cos(θ₁)
F₁y = F₁* sin(θ₁)
F₂x = F₂ * cos(θ₂)
F₂y = F₂ * sin(₂)
The resultant force on the mass at the origin is the vector sum of F₁ and F₂:
Fx = F₁x + F₂x
Fy = F₁y + F₂y
The magnitude of the resultant force is given by:
F = (Fx² + Fy²)
Plugging in the given values of G, m, x, and y, and evaluating the above equations, we get:
F = 2.5872 x 10⁻⁸N
Therefore, the answer is option (9).
To know more about magnitude
https://brainly.com/question/29680453
#SPJ1
hydroelectric power plants is a clean energy source. which of the following statements explains a disadvantage of using this source?
Hydroelectric power plants can cause harm to the environment and local ecosystems, especially when dams are built to create reservoirs.
While hydroelectric power is considered a clean energy source because it doesn't produce harmful emissions or pollutants, it does have negative environmental impacts. The construction of dams and reservoirs can cause significant damage to natural habitats, disrupt water flow, and alter the ecology of local rivers and streams.
This can have a detrimental effect on fish populations, migratory patterns, and even erosion of riverbanks. Additionally, the building of dams and reservoirs can lead to the displacement of communities and the loss of cultural heritage sites. The reliance on hydroelectric power can also be affected by climate change as reduced rainfall can lead to lower water levels in reservoirs, impacting the amount of electricity that can be generated.
To know more about the Hydroelectric, here
https://brainly.com/question/2433706
#SPJ1
Discharging capacitor voltage suppose that electricity is draining from a capacitor at a rate proportional to the voltage across its terminals and that, if is measured in seconds,
(a) solve this differential equation for using to denote the value of when .
(b) how long will it take the voltage to drop to 10 of its original value
When, we using to denote the value of V when t=0, we have; [tex]V_{0}[/tex] =v, and it will take 92.12 seconds for the voltage across the capacitor to drop to 10% of its initial value.
The differential equation governing the discharge of a capacitor is given by;
[tex]d_{v}[/tex]/[tex]d_{t}[/tex] = -1/RC V
where V is the voltage across the capacitor, R is the resistance in the circuit, and C is the capacitance of the capacitor.
Comparing this equation with the given equation, we can see that;
1/RC = 1/40
Therefore, we have;
RC = 40
To solve the differential equation, we can separate the variables and integrate both sides;
[tex]d_{v}[/tex]/v = -1/40 [tex]d_{t}[/tex]
Integrating both sides, we get;
ln V = -t/40 + C
where C is the constant of integration.
Exponentiating both sides, we get;
V = [tex]e^{C}[/tex]e-t/40
where $[tex]e^{[C]}[/tex]$ is a constant, which we can denote as $V_0$, the initial voltage across the capacitor.
Therefore, the solution to differential equation is;
[tex]V_{(t)}[/tex] = [tex]V_{0}[/tex]e -t/40
Now, we need to find the value of V when t=0;
V(0) [tex]V_{0}[/tex][tex]e^{0}[/tex] = [tex]V_{0}[/tex]
Therefore, using to denote the value of V when t=0, we have;
[tex]V_{0}[/tex] = v
we need to find the time it takes for the voltage to drop to 10% of its initial value. That is;
[tex]V_{(t)}[/tex] = 0.1 [tex]V_{0}[/tex]
Substituting this into the solution, we get;
0.1 [tex]V_{0}[/tex] = [tex]V_{0}[/tex]e -t/40
Taking natural logarithm of both sides, we get;
t = -40ln 0.1
Using the fact that $\ln 0.1 = -2.303$, we get;
t = 2.303 X 40 = 92.12 seconds
Therefore, it will take 92.12 seconds for the voltage across the capacitor to drop to 10% of its initial value.
To know more about capacitor here
https://brainly.com/question/17095663
#SPJ4
--The given question is incomplete, the complete question is
"Discharging capacitor voltage suppose that electricity is draining from a capacitor at a rate proportional to the voltage across its terminals and that, if is measured in seconds, dv/dt = -1/40v (a) solve this differential equation for using to denote the value of v when t=0 . (b) how long will it take the voltage to drop to 10 of its original value."--
The beat frequency produced when a 240 hertz tuning fork and a 246 hertz tuning fork are sounded together is
The beat frequency produced when a 240 Hz tuning fork and a 246 Hz tuning fork are sounded together is 6 Hz. This corresponds to option d) 6 hertz.
When two tuning forks with slightly different frequencies are sounded together, they produce a beat frequency. The beat frequency is the result of the interference between the two waves produced by the tuning forks.
In this case, we have a 240 Hz tuning fork and a 246 Hz tuning fork. To find the beat frequency, we need to calculate the difference between the frequencies of these two tuning forks:
Beat frequency = |Frequency1 - Frequency2|
Beat frequency = |240 Hz - 246 Hz|
Beat frequency = |-6 Hz|
Since frequency cannot be negative, we take the absolute value of the result:
Beat frequency = 6 Hz
So, the beat frequency produced when a 240 Hz tuning fork and a 246 Hz tuning fork are sounded together is 6 Hz. This corresponds to option d) 6 hertz.
In summary, the beat frequency is the difference between the frequencies of two tuning forks sounded together. In this case, with a 240 Hz and a 246 Hz tuning fork, the beat frequency is 6 Hz.
The complete question is:
The beat frequency produced when a 240 hertz tuning fork and a 246 hertz tuning fork are sounded together is
a) 245 hertz
b) 240 hertz
c) 12 hertz
d) 6 hertz
e) none of the above
For more about frequency produced:
https://brainly.com/question/3928502
#SPJ11
After 3 s, brian was running at 1.2 m/s on a straight path. after 7 s, he was running at 2 m/s. what was his acceleration
Brian's acceleration was [tex]0.2 m/s^{2}[/tex]. This means that his velocity increased by 0.2 m/s every second during the 4 seconds.
To find Brian's acceleration, we can use the formula: acceleration = (change in velocity) / (time taken)
The change in velocity is the difference between his final velocity and initial velocity: change in velocity = final velocity - initial velocity
So, we have: change in velocity = 2 m/s - 1.2 m/s = 0.8 m/s
The time taken is: time taken = 7 s - 3 s = 4 s
Now we can plug in these values to find the acceleration: acceleration = (0.8 m/s) / (4 s) = [tex]0.2 m/s^{2}[/tex]
Therefore, Brian's acceleration was [tex]0.2 m/s^{2}[/tex]. This means that his velocity increased by 0.2 m/s every second during the 4 seconds.
To know more about acceleration, refer here:
https://brainly.com/question/2303856#
#SPJ11
A proton moving eastward with a velocity of 5. 0 km/s enters a magnetic field of 0. 20 T pointing northward. What are the magnitude and direction of the force that the magnetic field exerts on the proton
The magnitude of the force that a magnetic field exerts on a charged particle is given by the equation:
F = qvB sin(theta)
where q is the charge of the particle, v is its velocity, B is the magnetic field strength, and theta is the angle between the velocity vector and the magnetic field vector.
In this case, the proton has a positive charge of +1.6 x 10^-19 C, and it is moving eastward with a velocity of 5.0 km/s. The magnetic field is pointing northward with a strength of 0.20 T.
The angle between the velocity vector and the magnetic field vector is 90 degrees, since the velocity is eastward and the magnetic field is northward.
Plugging these values into the equation, we get:
F = (1.6 x 10^-19 C)(5.0 x 10^3 m/s)(0.20 T) sin(90)
F = 1.6 x 10^-19 N
So the magnitude of the force that the magnetic field exerts on the proton is 1.6 x 10^-19 N.
The direction of the force can be determined using the right-hand rule. If you point your right thumb in the direction of the proton's velocity (eastward), and your fingers in the direction of the magnetic field (northward), then the direction of the force vector is perpendicular to both, pointing downward. Therefore, the direction of the force on the proton is southward.
A Calculate the young Young's modulus in the
calculate the Young’s modulus cantilever depression method. The length is Im.
which is suspended with a load of 150gm. The
depression is found to be 4cm. The thickness of the
beam is 5mm and breadth is 3cm (take gravity =9. 8)
Young's modulus using the cantilever depression method, we need to use the formula:
Y = (4FL^3) / (3bh^3d)
where Y is the Young's modulus, F is the force applied, L is the length of the cantilever, b is the breadth, h is the thickness, and d is the depression.
In this case, the length of the cantilever is given as 1m or 100cm, and the load applied is 150gm or 0.15kg. The depression is given as 4cm, and the breadth and thickness of the beam are given as 3cm and 5mm, respectively.
We need to convert the thickness to cm, which gives us 0.5cm.
Substituting these values in the formula, we get:
Y = (4 x 0.15 x 100^3) / (3 x 3 x 0.5^3 x 4)
Simplifying this, we get:
Y = 4.5 x 10^5 N/cm^2
Therefore, the Young's modulus of the beam is 4.5 x 10^5 N/cm^2.
It's important to note that when using the cantilever depression method, it's crucial to ensure that the beam is loaded within its elastic limit, and the deflection or depression is small enough to be considered as a linear relationship between the force applied and the deflection.
Additionally, it's important to take into account any sources of error, such as friction or air resistance, that may affect the accuracy of the results.
To know more about Young's modulus refer here
https://brainly.com/question/30756002#
#SPJ11
Your quadcopter has a terrible altitude sensor. To see how bad it really is you take many measurements with the quadcopter at 1 meter altitude. Your altitude sensor gives a mean of 1. 00 meters with a standard deviation of 13cm. The measurements are normally (Gaussian) distributed. What is the probability that your altimeter gives an error of less than 10cm for a single measurement?
The altimeter is not very accurate and is likely to have an error of at least 10cm due to high variability in measurements. This is confirmed by the z-score calculation, which shows that a 10cm error is far outside the normal range of variation.
We can use the standard normal distribution to calculate the probability of an error of less than 10cm for a single measurement. First, we need to convert the measurement error of 10cm to a z-score by using the formula:
[tex]z = (x - \mu) / \sigma[/tex]
where x is the measurement error, μ is the mean altitude reading, and σ is the standard deviation.
Substituting the given values, we get:
z = (0.10 - 1.00) / 0.13 = -7.69
Using a standard normal distribution table or calculator, we can find the probability that z is less than -7.69. This probability is essentially zero, which means that it is highly unlikely that the altimeter gives an error of less than 10cm for a single measurement.
In summary, the probability that the altimeter gives an error of less than 10cm for a single measurement is essentially zero.
This is because the mean altitude reading of 1.00 meter and the standard deviation of 13cm indicate a high degree of measurement variability, and the z-score calculation shows that the error of 10cm is far outside the normal range of measurement variation.
To know more about z-score refer here:
https://brainly.com/question/30557336#
#SPJ11
Calculate the highest frequency x-rays produced by 8•10^4eV electrons
The highest frequency x-rays produced by [tex]8 \times 10^4 eV[/tex] electrons is approximately[tex]1.93 \times 10^{19} Hz[/tex]. This equires the use of the formula for the maximum energy of the emitted photon, which takes into account the energy of the electron and Planck's constant.
To calculate the highest frequency x-rays produced by [tex]8 \times 10^4 eV[/tex]electrons, we need to use the formula for the maximum energy of the emitted photon: E = hf, where E is the energy of the electron, h is Planck's constant, and f is the frequency of the emitted photon.
First, we convert the energy of the electron from electron volts to joules using the conversion factor [tex]1 eV = 1.6 \times 10^{-19} J:[/tex]
[tex]E = 8 \times 10^4 eV \times 1.6\times10^{-19} J/eV[/tex]
[tex]E = 1.28\times10^{-14} J[/tex]
Next, we can use the formula to solve for the frequency of the emitted photon:
f = E/h
[tex]f = (1.28 \times10^{-14} J)/(6.626 \times 10^{-34} J s) \approx 1.93 \times10^{19} Hz[/tex]
Therefore, the highest frequency x-rays produced by [tex]8 \times 10^4 eV[/tex]electrons is approximately [tex]1.93 \times 10^{19} Hz.[/tex]
In summary, the calculation of the highest frequency x-rays produced by [tex]8 \times 10^4 eV[/tex] electrons requires the use of the formula for the maximum energy of the emitted photon, which takes into account the energy of the electron and Planck's constant. The result is an approximation of the frequency of the emitted photon in hertz.
To know more about frequency refer here:
https://brainly.com/question/30751571#
#SPJ11
A rock is at the edge of a bluff and weighs 22n. If the potential energy of the snowball is 620 J, what is the height of the bluff?
To solve this problem, we need to use the concept of potential energy and the formula for calculating potential energy, which is:
Potential energy (PE) = mass (m) x gravity (g) x height (h)
We can rearrange this formula to solve for height:
Height (h) = PE / (m x g)
In this problem, we are given the weight of the rock, which is 22N. We can convert this to mass using the formula:
Mass (m) = weight (w) / gravity (g)
Gravity (g) is a constant, which is 9.8 m/s^2.
So, mass (m) = 22N / 9.8 m/s^2 = 2.245 kg
Now, we can use the given potential energy of the snowball, which is 620 J, to calculate the height of the bluff:
Height (h) = PE / (m x g) = 620 J / (2.245 kg x 9.8 m/s^2) = 27.33 meters
Therefore, the height of the bluff is 27.33 meters.
In general, potential energy is the energy that an object has due to its position or configuration. In this problem, the snowball has potential energy because it is at a certain height above the ground, which means it has the potential to do work if it is allowed to fall.
The height of the bluff is important because it determines how much potential energy the snowball has. The higher the bluff, the more potential energy the snowball has, and the greater the force it can exert if it falls. This is known as the snowball effect or the snowball principle, where a small change or action can have a big impact if it is allowed to snowball or accumulate over time.
To know more about potential energy refer here
https://brainly.com/question/24284560#
#SPJ11
A 2,000-kg elevator is being accelerated upward at a rate of 3. 0 m/s2. What is the tension in the cable
The tension in the cable of the elevator is 6,000 N
The tension in the cable of the elevator can be calculated using the equation F = ma, where F is the force, m is the mass, and a is the acceleration.
In this case, the force required to accelerate the elevator upward is equal to the tension in the cable.
Given that the elevator has a mass of 2,000 kg and is being accelerated upward at a rate of 3.0 m/s2, we can calculate the force required as follows:
F = ma
F = 2,000 kg x 3.0 m/s2
F = 6,000 N
In summary, the tension in the cable of the elevator is equal to the force required to accelerate it upward, which is calculated using the equation F = ma.
Given the elevator's mass of 2,000 kg and upward acceleration of 3.0 m/s2, the tension in the cable is 6,000 N.
To know more about acceleration refer here
https://brainly.com/question/12550364#
#SPJ11