yalll pls help 20 points ) How is BMI weight calculated?

Responses

Divide weight by 678.

Double weight.

Subtract weight from heart rate.

Multiply weight by 703.

The net force on particle q1 is approximately 17.12 N to the right.

To calculate the net force on particle q1, we'll use Coulomb's Law: F = k * |q1 * q2| / r^2, where F is the force between two charges, k is the Coulomb's constant (8.99 * 10^9 N m^2/C^2), q1 and q2 are the magnitudes of the charges, and r is the distance between them.

First, we'll find the force between q1 and q2 (F12):
F12 = (8.99 * 10^9 N m^2/C^2) * (8.0 * 10^-6 C) * (3.5 * 10^-6 C) / (0.10 m)^2
F12 = 19.996 N (right)

Next, we'll find the force between q1 and q3 (F13):
F13 = (8.99 * 10^9 N m^2/C^2) * (8.0 * 10^-6 C) * (2.5 * 10^-6 C) / (0.25 m)^2
F13 = 2.8792 N (left)

Now, we'll calculate the net force on q1 (F_net) by subtracting the left force from the right force:
F_net = F12 - F13
F_net = 19.996 N - 2.8792 N
F_net = 17.1168 N (right)

So, the net force on particle q1 is approximately 17.12 N to the right.

To learn more about force, refer below:

https://brainly.com/question/13191643

#SPJ11

The uncertainty principle can be used to estimate the minimum kinetic energy of a neutron in a nucleus of a certain size. The resulting minimum energy is around [tex]10^{-24}[/tex] joules.

The uncertainty principle states that the product of the uncertainty in the position and momentum of a particle must be greater than or equal to Planck's constant divided by 4π.

Therefore, using the given radius of the nucleus as the uncertainty in position, we can calculate the minimum kinetic energy of a neutron in the nucleus by assuming it has an uncertainty in momentum equal to its uncertainty in position.

Using this approach, we have:

[tex]\Delta x = 1.2 \times 10 - 15 m[/tex] (uncertainty in position)

[tex]\Delta p = \Delta mv = \Delta m(\Delta x/\Delta t) = \Delta m(2\pi \Delta f \Delta x)[/tex] (uncertainty in momentum)

where Δm is the uncertainty in mass, Δf is the frequency of the neutron, and Δt is the time interval over which the position is measured.

Assuming a typical frequency of [tex]10^{21} Hz[/tex] and a mass uncertainty of 1 atomic mass unit [tex](1.67 \times 10^{-27} kg)[/tex], we obtain a minimum kinetic energy of approximately [tex]10^{-24} \;joules[/tex].

In summary, the minimum kinetic energy of a neutron contained in a typical nucleus of radius [tex]1.2 \times 10^{-15} m[/tex] can be estimated using the uncertainty principle.

This approach involves assuming an uncertainty in momentum equal to the uncertainty in position and using typical values for the frequency and mass uncertainty of the neutron. The resulting minimum kinetic energy is on the order of [tex]10^{-24} \;joules[/tex].

To know more about kinetic energy refer here:

https://brainly.com/question/7674744#

#SPJ11

The correct marking on the stick which will enable the system to remain horizontal is 48.5 cm from the left end of the meter stick.

Since the system is in equilibrium, the sum of the torques acting on it must be zero. We can choose any point as the axis of rotation, but it is convenient to choose the left end of the meter stick. In that case, the torques due to the masses m₁ and m₂ are:

τ₁ = m₁ g (x - L/2)

τ₂ = m₂ g (L/2 - x)

where L is the length of the meter stick, and g is the acceleration due to gravity.

The torque due to the meter stick itself is:

τ₃ = (1/2) M g (L/2)

where M is the mass of the meter stick.

Since the system is in equilibrium, the sum of these torques must be zero:

τ₁ + τ₂ + τ₃ = 0

Substituting the expressions for τ₁, τ₂, and τ₃, we get:

m₁ g (x - L/2) + m₂ g (L/2 - x) + (1/2) M g (L/2) = 0

Simplifying and solving for x, we get:

x = (m₁ - M/3) L / (m₁ + m₂ + M/3)

Substituting the given values, we get:

x = (m₁ - 0.1) 1 / (m₁ + m₂ + 0.1/3)

We don't know the values of m₁ and m₂, but we know that the system is in equilibrium, so the weight of m₁ plus the weight of m₂ plus the weight of the meter stick must be equal to zero:

m₁ g + m₂ g + M g = 0

Substituting M = 0.1 kg and g = 10 m/s², we get:

m₁ + m₂ = 1

We can now substitute m₂ = 1 - m₁ in the expression for x:

x = (m₁ - 0.1) / (1 + 0.1/3 - m1)

To find the value of m₁ that makes x equal to L/2 (the midpoint of the meter stick), we set x = L/2 and solve for m₁:

L/2 = (m₁ - 0.1) / (1 + 0.1/3 - m₁)

Simplifying, we get:

2(m₁ - 0.1) = (1 + 0.1/3 - m₁)

Solving for m₁, we get:

m₁ = 0.485 kg

To know more about meter-stick, here

brainly.com/question/15298079

#SPJ4

To estimate the mass of the fish using the available items, follow these steps:

1. Fill your 16 oz coffee mug with river water.
2. Tie the rope around the fish securely, ensuring it doesn't escape.
3. Place the fish inside the plastic bag and seal it. Make sure there's no air inside the bag.
4. Use the paddles to create a makeshift balance scale. Balance the paddle on a stable surface in the boat, with the center acting as a fulcrum.
5. Place the bag with the fish on one end of the paddle and the coffee mug filled with water on the other end.
6. Gradually add or remove water from the coffee mug until the paddle balances evenly.
7. Measure the volume of water left in the coffee mug. This is approximately equal to the volume of the fish.
8. Assume the fish has a density similar to water (1 kg/L). Convert the remaining water volume in the coffee mug from ounces to liters (16 oz = 0.473 L).
9. Multiply the fish's volume in liters by its density (1 kg/L) to find the fish's mass in kilograms.

Keep in mind that this method is an estimation and may not be extremely accurate, but it should give you a rough idea of the fish's mass in the absence of proper scales.

To learn more about density, refer below:

https://brainly.com/question/29775886

#SPJ11

The energy of the photon is 440 keV (or 7.048 x 10^-14 J), and the wavelength is approximately 2.82 x 10^-12 meters.

When an electron and positron are generated by a photon, the energy of the photon is converted into the mass and kinetic energy of the two particles.

The energy of the photon can be calculated by adding the kinetic energies of the electron and positron, which is 220 keV + 220 keV = 440 keV. To convert this to Joules, multiply by 1.602 x 10^-16 J/keV, which gives you an energy of 7.048 x 10^-14 J.

To calculate the wavelength of the photon, we can use the Planck's equation: E = h*c/λ, where E is the energy, h is Planck's constant (6.626 x 10^-34 J·s), and c is the speed of light (3 x 10^8 m/s). Solving for the wavelength λ:

λ = h*c/E = (6.626 x 10^-34 J·s)*(3 x 10^8 m/s)/(7.048 x 10^-14 J) ≈ 2.82 x 10^-12 m

So, the energy of the photon is 440 keV (or 7.048 x 10^-14 J), and the wavelength is approximately 2.82 x 10^-12 meters.

To learn more about photon, refer below:

https://brainly.com/question/20912241

#SPJ11

It is safe to assume that each cart would experience a distinct force during each collision caused by the carts, and the force distribution would change depending on the aforementioned criteria.

During each individual collision, it is unlikely that the two carts received the same force during the collision. This is because the force of the collision depends on various factors such as the mass and velocity of the carts, the angle of collision, and the materials of the carts.

For instance, if one cart was heavier and moving faster than the other, it would exert more force during the collision. Additionally, the angle of collision can also affect the force received by each cart.

If the collision was head-on, the force would be distributed evenly between the carts. However, if the collision was at an angle, one cart would receive more force than the other.

The materials of the carts can also affect the force of the collision, as carts made of more rigid materials would receive more force than carts made of softer materials.

Overall, it is safe to say that each individual collision created by the carts would result in different forces being exerted on each cart, and the force distribution would vary depending on the aforementioned factors.

To learn more about :collision

https://brainly.com/question/7221794

#SPJ11

To determine the forces in all the members, we have to consider as follows:

1. Draw the truss and label all the members and joints.
2. Determine the support reactions by solving the equilibrium equations (sum of vertical forces, horizontal forces, and moments should be zero).
3. Using the Method of Joints or Method of Sections, analyze each joint or section by applying the equilibrium equations.
4. For each member, calculate the force and determine if it is in tension or compression based on the direction of the force acting on the member.
5. Organize your results in a table with columns for the member label, force value, and whether the force is tension or compression.
6. Finally, show the results on the truss by indicating the force magnitudes and whether each member is in tension or compression.

Remember that for a more accurate answer, I need more details about the truss you are analyzing.

To learn more about compression, refer below:

https://brainly.com/question/30060592

#SPJ11

To solve this problem, we can use the combined gas law, which relates the pressure, volume, and temperature of a gas:

(P1 x V1) / T1 = (P2 x V2) / T2

where P1, V1, and T1 are the initial pressure, volume, and temperature, and P2, V2, and T2 are the final pressure, volume, and temperature, respectively.

First, let's convert the initial temperature of 30°C to Kelvin:

T1 = 30°C + 273.15 = 303.15 K

We can now set up the equation with the initial conditions:

(760 mmHg x V1) / 303.15 K = (P2 x 2V1) / 353.15 K

where V1 is the initial volume of the gas.

Simplifying this equation by multiplying both sides by 303.15 K and dividing by 2V1, we get:

P2 = (760 mmHg x 303.15 K) / (353.15 K) = 653.75 mmHg

Therefore, the final pressure of the gas is 653.75 mmHg when the volume is doubled and the temperature is increased to 80°C.

1. The relationship between lightning and electricity was made clear by Franklin's experiment.2.  He submitted a plan for an experiment in which a lightning rod would be used to attempt to capture an electrical charge. 3,4. Some scientists and historians doubt this story because it's highly unlikely that lightning struck a key while Franklin was flying a kite because he would have most likely perished5. . Noone else try repeating this experiment

Do you think that Franklin actually performed this experiment?

The experiment was not carried out by Franklin to demonstrate the presence of electricity. Furthermore, it's highly unlikely that lightning struck a key while Franklin was flying a kite because he would have most likely perished.

He submitted a plan for an experiment in which a lightning rod would be used to attempt to capture an electrical charge in a "leyden jar," a container for storing electrical charges, proving that lightning was a type of electricity. Noone else try repeating this experiment.

Franklin established that lighting was an electrical discharge through the kite experiment and discovered that it could be charged into the ground over a conductor, offering a secure alternate route and reducing the possibility of fatal fires.

To learn more about electricity use:

https://brainly.com/question/29789034

#SPJ4

Both variable resistors and PWM can be used to: control the speed of a DC motor, with the former offering simplicity and the latter providing higher efficiency.

The speed of a DC motor increases with increasing current through the armature coil. There are two ways to change the current supplied to the motor: (1) using a variable resistor (potentiometer) and (2) employing pulse width modulation (PWM).

1) Variable Resistor (Potentiometer): This method works by adjusting the resistance in the circuit, which controls the current flowing through the motor. By changing the resistance, you can change the current and hence, the motor speed. One advantage of this method is its simplicity and ease of use. A disadvantage, however, is that it can be inefficient, as some energy is lost as heat in the resistor.

2) Pulse Width Modulation (PWM): This method works by switching the supply voltage on and off at a specific frequency, thus creating pulses with varying widths. The average voltage applied to the motor is controlled by adjusting the pulse width, which in turn, controls the motor speed. One advantage of PWM is its efficiency, as there is minimal energy loss in the process. A disadvantage, though, is that it can generate electrical noise and requires more complex circuitry.

In summary, both variable resistors and PWM can be used to control the speed of a DC motor, with the former offering simplicity and the latter providing higher efficiency.

To know more about DC motor, refer here:

https://brainly.com/question/8942733#

#SPJ11

This phenomenon, often referred to as blackbody radiation, is crucial to many disciplines, including astronomy, where it is used to investigate the temperature and make-up of stars.

According to the laws of thermal radiation, hotter objects emit photons with a shorter average wavelength. This is because the energy of a photon is directly proportional to its frequency, and inversely proportional to its wavelength. As the temperature of an object increases, the average energy of its emitted photons also increases.

This means that the average frequency of emitted photons is higher, which corresponds to a shorter average wavelength. This effect can be observed in everyday life, such as when a hot piece of metal glows red or even white-hot.

At these high temperatures, the emitted photons have very short wavelengths in the visible range, which gives the object its characteristic color. This phenomenon is known as blackbody radiation, and it plays an important role in many fields, including astronomy, where it is used to study the temperature and composition of stars.

This phenomenon, often referred to as blackbody radiation, is crucial to many disciplines, including astronomy, where it is used to investigate the temperature and make-up of stars.

To learn more about : phenomenon

https://brainly.com/question/24431608

#SPJ11

These radio waves have a wavelength of roughly 492.62 metres.

In the USA, the FM transmission runs from 88.0 MHz to 108.0 MHz. 100 channels, each 200 kHz (0.2 MHz) wide, make up the band. The centre frequency is situated 100 kHz (0.1 MHz) up from the channel's lower end, or at half the FM channel's bandwidth. As frequency rises as energy falls, frequency and energy are related directly in the energy equation.

wavelength Equals light's speed (c) divided by frequency (f)

Where the speed of light (c) is approximately 3.00 x 10⁸ m/s.

Converting the given frequency of 610 kHz to Hz:

610 kHz = 610 x 10³ Hz

Substituting the values in the formula:

λ = (3.00 x 10⁸ m/s) / (610 x 10³ Hz)

λ = 492.62 meters (approx.)

To know more about wavelength visit:-

https://brainly.com/question/13533093

#SPJ1

The small plate is moving eastward at a rate of 5 millimeters per year. After 1.5 million years, the small plate would be 7,500 meters farther away from the large plate.

To find the rate of motion of the small plate, we can divide the distance it moved by the time it took to move that distance:

Rate of motion = distance/time

In this case, the distance is 150,000 meters and the time is 30 million years, which is equivalent to 30,000,000 years. Converting both values to millimeters and years, respectively, we get:

Rate of motion = (150,000 meters) / (30,000,000 years) * (1000 mm/meter) / (1 year/1)

Simplifying this expression, we get:

Rate of motion = 5 mm/year

To find where the small plate would be after 1.5 million years, we can use the formula:

distance = rate of motion * time

Using the rate of motion we calculated in part 1 (5 mm/year) and the given time of 1.5 million years, we get:

distance = (5 mm/year) * (1.5 million years)

Converting the result back to meters, we get:

distance = 7,500 meters

To know more about plate, here

brainly.com/question/16941906

#SPJ4

When blood glucose levels decline, several organs and cells in the body respond to restore glucose levels and maintain homeostasis. The first response comes from the pancreas, which releases glucagon into the bloodstream. Glucagon stimulates the liver to break down stored glycogen into glucose, which is then released into the bloodstream. This process is called glycogenolysis and is one of the three ways glucose is reintroduced to the body.

The second response comes from the adrenal glands, which release epinephrine and norepinephrine into the bloodstream. These hormones stimulate the liver to break down glycogen into glucose, and they also stimulate the breakdown of fat cells into glucose, a process called lipolysis. This is the second way glucose is reintroduced to the body.

Finally, the third response comes from the kidneys, which can produce glucose through a process called gluconeogenesis. This is the third way glucose is reintroduced to the body.

The ultimate use of the glucose created in this process is to provide energy to the body's cells. Glucose is the primary source of energy for the brain and is also used by muscles and other organs.

If a patient exhibits symptoms such as fatigue and increased thirst and urination, several tests can be conducted to determine if they have Cushing's syndrome, type I diabetes, or type II diabetes. For Cushing's syndrome, tests may include blood and urine tests to measure cortisol levels, as well as imaging tests to check for tumors in the adrenal or pituitary glands.

For type I diabetes, blood tests may be conducted to measure blood glucose and ketone levels, as well as tests to measure levels of antibodies that attack insulin-producing cells. For type II diabetes, blood tests may be conducted to measure blood glucose levels, as well as tests to measure insulin resistance and other metabolic factors.

Additionally, a physical exam may reveal signs such as high blood pressure or excess weight, which can be associated with type II diabetes. Overall, a thorough medical evaluation can help determine the underlying cause of a patient's symptoms and guide appropriate treatment.

To know more about homeostasis refer here

https://brainly.com/question/3888340#

#SPJ11

Using this equation, the refractive index of a material with an angle of incidence of 24∘ and an angle of refraction of 17∘ was found to be approximately 1.33, consistent with common transparent materials.

When a beam of light passes from one medium into another, its direction changes due to the change in the speed of light in the different media. This phenomenon is known as refraction. The angle of incidence is the angle between the incident ray and the normal to the surface at the point of incidence, and the angle of refraction is the angle between the refracted ray and the normal.

The relationship between the angles of incidence and refraction is given by Snell's law, which states that the ratio of the sines of the angles of incidence and refraction is equal to the ratio of the speeds of light in the two media. Mathematically,

[tex]$\frac{\sin{\theta_1}}{\sin{\theta_2}}=\frac{v_1}{v_2}$[/tex]

where [tex]"\theta_2"[/tex] is the angle of incidence, [tex]"\theta_2"[/tex] is the angle of refraction, [tex]v_1[/tex] is the speed of light in the incident medium (in this case, air), and [tex]v_2[/tex] is the speed of light in the transparent material.

Assuming that the transparent material has a higher refractive index than air, we know that the angle of refraction will be smaller than the angle of incidence. In this case, we are given that [tex]"\theta_1"[/tex] = 24∘ and [tex]"\theta_2"[/tex] = 17∘. We can use Snell's law to find the refractive index of the transparent material.

First, we need to know the speed of light in the air and the speed of light in the transparent material. The speed of light in air is approximately [tex]$3 \times 10^8 \text{ m/s}$[/tex], and the speed of light in the transparent material depends on its refractive index. Let's denote the refractive index of the material by n. Then, we have:

[tex]$\frac{\sin{24^\circ}}{\sin{17^\circ}}=\frac{3 \times 10^8 \text{ m/s}}{v_2}$[/tex]

Solving for [tex]v_2[/tex], we get:

[tex]$v_2 = (3 \times 10^8 \text{ m/s}) \times \frac{\sin{17^\circ}}{\sin{24^\circ}} \approx 2.26 \times 10^8 \text{ m/s}$[/tex]

Next, we can use the relationship between the speed of light and the refractive index to find n:

[tex]$n = \frac{c}{v_2}$[/tex]

where c is the speed of light in a vacuum

Thus,

[tex]$n = \frac{3 \times 10^8 \text{ m/s}}{2.26 \times 10^8 \text{ m/s}} \approx 1.33$[/tex]

This value of the refractive index is close to that of common transparent materials like water and glass.

In summary, when a beam of light travels from air into a transparent material at an angle of incidence of 24∘ and an angle of refraction of 17∘, the refractive index of the material can be found using Snell's law and the relationship between the speed of light and the refractive index. The calculated value of the refractive index is approximately 1.33, which is consistent with that of common transparent materials.

To learn more about refractive index

https://brainly.com/question/30761100

#SPJ4

The boy must raise the bucket to a height of 10.15 meters in order to do 500 J of work.

To calculate the height to which the boy raises the bucket of water, we need to use the equation for gravitational potential energy:

PE = mgh

where PE is the potential energy, m is the mass, g is the acceleration due to gravity, and h is the height.

Since the boy does 500 J of work, this energy is equal to the change in potential energy of the bucket:

W = ΔPE

ΔPE = mghf - mghi

where [tex]h_{i}[/tex] is the initial height (which we can assume is zero), [tex]h_{f}[/tex] is the final height we want to find, and W is the work done.

Substituting the values given in the problem, we have:

500 J = 5 kg × 9.81 [tex]m/s^{2}[/tex] × [tex]h_{f}[/tex]

Solving for [tex]h_{f}[/tex], we get:

[tex]h_{f}[/tex] = 500 J / (5 kg × 9.81 [tex]m/s^{2}[/tex]) = 10.15 m

Therefore, the boy must raise the bucket to a height of 10.15 meters in order to do 500 J of work.

To know more about gravitational potential energy, refer here:

https://brainly.com/question/19768887#

#SPJ11

The linear frequency that should be selected for the power supply for the circuit to operate at resonance is 2077.9 Hz.

To find the linear frequency that should be selected for the power supply for the circuit to operate at resonance, we can use the formula for resonant frequency of an RLC circuit:

f = 1 / (2π√(L*C))

where f is the resonant frequency, L is the inductance in henries, and C is the capacitance in farads.

In this case, the capacitance is given as 77.7 μF, which is equivalent to 0.0777 F, and the inductance is given as 28.6 mH, which is equivalent to 0.0286 H. The resistance is given as 630.5 Ω.

Substituting these values into the formula, we get:

f = 1 / (2π√(0.0286 H * 0.0777 F)) = 2077.9 Hz

At this frequency, the inductive reactance and the capacitive reactance cancel out, and the impedance of the circuit is purely resistive, resulting in maximum current flow and minimum power loss.

To learn more about frequency click on,

https://brainly.com/question/16991418

#SPJ4

The fuse of the 22 W device is more likely to burn out.

When two devices of different power ratings are connected in series, the voltage across each device is equal, but the current through each device will be different.

In this case, the two devices have power ratings of 22 W and 11 W, and are connected in series across a 440 V mains.

To determine which device is likely to burn out when the switch is turned on,

we need to calculate the current through each device using Ohm's law, which states that I = V/R, where I is the current, V is the voltage, and R is the resistance.

The resistance of each device can be calculated as follows:

For the 22 W device, R = V^2/P = (220 V)^2/22 W = 2200 ohms

For the 11 W device, R = V^2/P = (220 V)^2/11 W = 4400 ohms

The total resistance of the circuit can be found by adding the individual resistances:

R_total = R1 + R2 = 2200 + 4400 = 6600 ohms

Using Ohm's law, we can calculate the current through each device:

For the 22 W device, I1 = V/R1 = 220 V/2200 ohms = 0.1 A

For the 11 W device, I2 = V/R2 = 220 V/4400 ohms = 0.05 A

Since the 22 W device has a higher current flowing through it, it is more likely to burn out when the switch is turned on.

To know more about power ratings refer here

https://brainly.com/question/26256725#

#SPJ11

The speed of the waves passing the anchored boat can be calculated using the formula Speed = Wavelength / Period. With a wavelength of 5 meters and a period of 2 seconds, the speed of the waves is 2.5 meters per second.

The speed of the waves can be determined by the formula:

Speed = Wavelength / Period

Where wavelength is the distance between two consecutive wave crests, and period is the time it takes for two consecutive wave crests to pass a fixed point (in this case, the anchored boat).

We know that the wavelength of the waves is 5 meters. We also know that the period is 2 seconds. Therefore:

Speed = 5 meters / 2 seconds = 2.5 meters/second

So the speed of the waves is 2.5 meters per second.

To learn more about wavelength

https://brainly.com/question/31143857

#SPJ4

The mass of the series-200 Shinkansen bullet train is approximately 953,000 kg.

High-speed trains like the Shinkansen bullet train are well-known for their quickness and effectiveness. With a top speed of 76.4 m/s, the series-200 train is one of the largest bullet trains currently in use. Knowing the train's mass is crucial for ensuring correct operation since the kinetic energy of the train plays a significant role in its performance and safety.

To find the mass of the series-200 Shinkansen bullet train, we'll use the formula for kinetic energy:

Kinetic Energy (KE) = 0.5 * mass (m) * velocity^2 (v^2)

The highest kinetic energy (2.78 x 109 J) and velocity (76.4 m/s) are provided. We'll now calculate the mass:

1. Rearrange the formula to isolate mass:

mass (m) = (2 * KE) / v^2

2. Plug in the given values:

mass (m) = (2 * 2.78 x 10^9 J) / (76.4 m/s)^2

3. Calculate the mass:

mass (m) = (5.56 x 10^9 J) / (5833.76 m^2/s^2)

mass (m) = 9.53 x 10^5 kg

To know more about kinetic energy, click here;

https://brainly.com/question/26472013

#SPJ11

The velocity of the ball right before it hits the ground is approximately 17.15 m/s.

Assuming that there is no air resistance, the velocity of the ball right before it hits the ground can be calculated using the equation v² = u² + 2as, where v is the final velocity, u is the initial velocity (which is 0 m/s in this case), a is the acceleration due to gravity (which is approximately 9.8 m/s²), and s is the distance the ball falls (which is 15 meters in this case). Plugging these values into the equation, we get:

v² = 0² + 2(9.8)(15)
v² = 294
v ≈ 17.15 m/s

the velocity of the ball right before it hits the ground is approximately 17.15 m/s.
Therefore, the velocity of the ball right before it hits the ground is approximately 17.15 m/s.

Know more about the equations of motion here:

https://brainly.com/question/14355103

#SPJ11

The magnitude of electric field strength at a point 2.2cm to the left is 2.694 x 10⁶ N/C.

The magnitude of the force on a -2.7 μC charge is 7.2898 N.

Calculate the electric field at the given point due to the two positive charges using the formula:

E = k × Q / r²

where k = Coulomb's constant,

Q = charge, and

r = distance from the charge to the point of interest.

For the first positive charge,

Q = 6.5 μC and

r = 4.3 cm + 2.2 cm = 6.5 cm = 0.065 m.

Plugging these values into the formula gives:

E1 = (8.98755 x 10⁹ N. m²/C²) × (6.5 x 10⁻⁶ C) / (0.065 m)² = 2.054 x 10⁵ N/C

For the second positive charge,

Q = 1.4 μC and

r = 4.6 cm - 2.2 cm = 2.4 cm = 0.024 m.

Plugging these values into the formula gives:

E2 = (8.98755 x 10⁹ N. m²/C²) × (1.4 x 10⁻⁶ C) / (0.024 m)² = 4.249 x 10⁶ N/C

Subtract its contribution from the total electric field.

For the negative charge,

Q = -2.7 μC and

r = 2.2 cm = 0.022 m.

Plugging these values into the formula gives:

E3 = (8.98755 x 10⁹ N. m²/C²) × (-2.7 x 10⁻⁶ C) / (0.022 m)² = -1.609 x 10⁶ N/C

The total electric field at the point of interest is then:

Etotal = E1 + E2 + E3 = 2.054 x 10⁵ N/C + 4.249 x 10⁶ N/C - 1.609 x 10⁶ N/C = 2.694 x 10⁶ N/C

Now, to calculate the force on a -2.7 μC charge placed at this point:

F = q × E

where q = charge and E = electric field.

Plugging in the values gives:

F = (-2.7 x 10⁻⁶ C) * (2.694 x 10⁶N/C) = -7.2898 N

The negative sign indicates that the force is directed in the opposite direction to the electric field, which makes sense since the charge is negative.

Therefore, the magnitude of the force is:

|F| = 7.2898 N

Answer for part 1: 2.694 x 10⁶ N/C

Answer for part 2: 7.2898 N

Find out more on magnitude here: https://brainly.com/question/30337362

#SPJ1

(a) The free body diagram consist of three forces, normal force, weight of skier, and force of friction.

(b) The normal force acting on the skier is approximately 600 N.

The forces that act on the skier are:

B) To determine the normal force acting on the skier, we need to find the component of the gravitational force perpendicular to the slope. This can be calculated using trigonometry:

N = mg cos(θ)

where;

Substituting the given values, we get:

N = (66 kg) x (9.8 m/s^2) x cos(22°)

N ≈ 600 N

Learn more about normal force here: https://brainly.com/question/14486416

#SPJ1

Based on the attached diagram:

The frequency of the wave is calculated s follows;

Frequency = Number of complete oscillations / time

Frequency = 3/2

Frequency = 1.5 Hz

Period = 1/f

Period = 1/1.5

Period = 0.67 seconds

wavelength = distance / Number of complete oscillations

wavelength = 10 / 3

wavelength = 3.33 m

Speed = wavelength * freqeuncy

Speed = 3.33 * 1.5

Speed = 5 m/s

Learn more about frequency and wavelength at: https://brainly.com/question/6297363

#SPJ1

ans. 32P16

When phosphorus-32 undergoes beta decay, the nuclide formed is sulfur-32. Phosphorus-32 undergoes beta minus decay, changing a neutron to a proton. This increases the atomic number by one. If it underwent beta minus decay, a proton would change to a neutron and decrease the atomic number by one.

Approximately 4.188 kg of water is used to cool the engine.

To determine the mass of water used to cool the engine, we need to use the specific heat capacity of water and the formula for heat transfer.

We can assume that the engine and water in it initially had a temperature of 35°C and cooled to 10°C. The temperature difference is ΔT = 35°C - 10°C = 25°C.

The formula for heat transfer is Q = mcΔT, where Q is the heat transferred, m is the mass of the substance, c is its specific heat capacity, and ΔT is the change in temperature.

We are given Q = 4.4x [tex]10^{6}[/tex] J and the mass of the engine, so we need to find c for water.

The specific heat capacity of water is 4.18 J/g°C. We can rearrange the formula to solve for the mass of water: m = Q / cΔT. Plugging in the values, we get:

m = 4.4x [tex]10^{6}[/tex] J / (4.18 J/g°C x 25°C) = 4188 g or 4.188 kg

Therefore, approximately 4.188 kg of water is used to cool the engine.

To know more about heat transfer, refer here:

https://brainly.com/question/13433948#

#SPJ11

Answer: new moon

Explanation:

suppose you have a straight wire that has a resistance of 5 ohms and a length of 11 meters, attached to a battery. The U is 5 volts, to the nearest 0.01.

Using the given information, we can determine the current flowing through the wire when the maximum force is experienced. The formula for the force on a wire in a magnetic field is:

F = B * I * L * sin(theta)

Where F is the force, B is the magnetic field strength, I is the current, L is the length of the wire, and theta is the angle between the magnetic field and the current. In this case, the maximum force occurs when sin(theta) = 1 (i.e., when the angle is 90 degrees).

Given F = 11 N, B = 7 T, and L = 11 m, we can solve for I:

11 N = 7 T * I * 11 m
I = 11 N / (7 T * 11 m)
I = 1 A

Now that we know the current, we can use Ohm's Law (V = I * R) to find the battery voltage, where V is the voltage, I is the current, and R is the resistance:

V = 1 A * 5 Ohms
V = 5

To learn more about : volts

https://brainly.com/question/27861305

#SPJ11

Sydney McLaughlin's average speed during the 400-meter hurdles race was 7.77 m/s.

The average speed of Sydney McLaughlin during the 400-meter hurdles race is calculated as follows;

Average speed = distance / time

The distance is 400 meters, and the time is 51.46 seconds.

The average speed of Sydney McLaughlin during the 400-meter hurdles race is calculated as;

Average speed = 400 / 51.46

Average speed = 7.77 m/s

Learn more about average speed here: https://brainly.com/question/4931057

#SPJ1

The negative sign indicates that the velocity of the launcher is in the opposite direction of the tennis ball's velocity (south). After calculating the value, you will find the velocity of the 20 kg tennis ball launcher.

To determine the velocity of the tennis ball launcher, we can apply the law of conservation of momentum. This law states that the total momentum before an event is equal to the total momentum after the event, provided no external forces are acting on the system.

Before the launch, both the 20 kg tennis ball launcher and the 0.057 kg tennis ball are at rest, so the total initial momentum is zero. After the launch, the tennis ball has a velocity of 36 m/s to the north. We can find the final momentum of the launcher using the equation:

initial momentum = final momentum
0 = (mass of tennis ball)(velocity of tennis ball) + (mass of launcher)(velocity of launcher)

Substitute the given values:
0 = (0.057 kg)(36 m/s) + (20 kg)(velocity of launcher)

Solve for the velocity of the launcher:
velocity of launcher = -(0.057 kg * 36 m/s) / 20 kg

The negative sign indicates that the velocity of the launcher is in the opposite direction of the tennis ball's velocity (south). After calculating the value, you will find the velocity of the 20 kg tennis ball launcher.

To know more about velocity, refer here:

https://brainly.com/question/1482529#

#SPJ11